|Heat Treatment||Tempering, Hardening|
|Size||M3 - M30|
Inconel bolts, like Inconel 600, 601,625,686,718 & 725 bolts, are a family of nickel-chromium-molybdenum alloys used for their high strength at elevated temperatures and good corrosion resistance. Because of its high thermal stability, Inconel can be used in service temperatures ranging from cryogenic to 2200 DegreeF (982 DegreeC). The high alloy content of Inconel bolts enable it to withstand a wide variety of severe corrosive environments. In mild environments, such as the atmosphere, sea water, neutral salts, and alkaline media, there is almost no attack to Inconel bolts. In more severe corrosive environments the combination of nickel and chromium provides resistance to oxidizing chemicals, whereas the high nickel and molybdenum contents supply resistance to nonoxidizing environments.
Because Inconel bolts offer a good balance of corrosion resistance, temperature stability, toughness and strength they are often a material of choice for chemical processing, aerospace, marine, electronics and oil & gas.
The most commonly used grades of Inconel nickel alloy bolts are Inconel 625 and Inconel 718. For more indepth information on these specific grades, visit our Inconel 625 or Inconel 718 bolt pages, or contact one of our engineering experts.
|Surface Treatment||Plain, Black|
Monel 400 Fasteners:
Monel K-500 Fasteners:
|Size||3/8 inch - 2 inch|
|Type||Titanium alloy fasteners|
All of our bolts are made with aircraft grade Titanium Alloy. One of the outstanding benefits of Mettec bolts is that we forge the heads for superior strength. The threads are then rolled to produce greater fatigue strength and reduce galling. Our bolts exceed minimum Ultimate Tensile Strength (UTS) of 120,000 psi. Mettec can also make titanium bolts that exceed 160,000 psi in Ultimate Tensile Strength (UTS). Both styles of bolts conform to DIN and ASTM specifications. Titanium bolts can replace both grade 5 and grade 8 steel bolts which have minimum UTS requirements of 120,000 psi and 150,000 psi respectively. Metric bolts with an 8.8 rating can be replaced with titanium while bolts with a 10.9 rating can sometimes be replaced with titanium depending on intended use. Any bolts with a rating over 10.9 rating should not be replaced with titanium.