- Home
- ยป
- Our Products
- »
- Stainless Steel U Tubes
Stainless Steel U Tubes
Stainless Steel 304L U Tube
Size/Diameter | 273 mm OD |
Material | Stainless Steel |
Usage/Application | Fertilizer Plants |
Length | 22 Meter |
Brand | MPJ |
Country of Origin | Made in India |
Technique | Hot Rolled |
Material Grade | SS304L |
We are globally recognized stockiest and supplier of Stainess Steel 304L Seamless U Tubes. These are highly used for the purpose of measuring the pressure, Vacuum and flow measurment in the plant.
We provide a variety of SS 304L Welded U Tubes that are used for many industrial purposes. The Stainless Steel S30403 U Tubes manufactured by us are highly demanded by clients all over the world because of their flow-efficient make and durability.
Some of the salient features of our products are:
- U bending is done by cold working process.
- U bending is done to the required radius as per customer drawings.
- The bend portion and six inch legs in stress releived by resistence heating.
- Inert gas is passed through it at the required flow rate to avoid oxidation in ID.
- The radius checked for its OD and wall thinning with the recommended specification.
- The physical properties and microstructure is checked at three different position.
Stainless Steel 304L U Tube Chemical Composition:
GRADES |
C |
MN |
P |
S |
SI |
CR |
NI |
MO |
TI |
NB |
N |
TP304L |
0.035 |
2 |
0.045 |
0.03 |
1 |
18.0-20.0 |
8.0-13.0 |
- |
- |
- |
- |
SS 304L Welded U Tubes Mechanical Properties:
MATERIAL |
HEAT |
TEMPERURE |
TENSILE STRENGTH |
YIELD STRENGTH |
ELONGATION %, MIN |
TREATMENT |
MIN. |
KSI (MPA), MIN. |
KSI (MPA), MIN. |
||
|
º F(º C) |
|
|
||
TP304L |
Solution |
1900 (1040) |
70(485) |
25(170) |
35 |
Stainless Steel 304L Seamless U Tubes Equivalent Grades:
STANDARD |
WERKSTOFF NR. |
UNS |
JIS |
BS |
GOST |
AFNOR |
EN |
SS 304L |
1.4306/1.4307 |
S30403 |
SUS 304L |
304S11 |
03??18??11 |
Z7CN18???09 |
X2CrNi18-9 / X2CrNi19-11 |
Stainless Steel 304L Seamless & Welded U Tubes, SS JIS SUS 304L U Tubing Supplier, Stainless Steel DIN 1.4301 Seamless U Tubes, Stainless Steel BS 304S11 U Bend Tubing Exporter in Dubai, SS 304L Seamless U Tubing, Stainless Steel GOST 03??18??11 Welded U Tubing, Stainless Steel 304L U Tubes, Suppliers and Stockiest of SS UNS S30400 U Tube, SS EN X2CrNi18-9 / X2CrNi19-11 U Tubing Manufacturer in India.
Additional Information:
- Packaging Details: ASTM A213 Stainless Steel 304L U Tubes are surface wash and clean to remove all impurities and stock in the warehouse. Then it is wrapped in thin plastic and also it ends are protected by plastic caps to avoid any damage in transit. Stainless Steel 304L Welded U Tubing is bundled in bubble wrap followed by assorting them in colored plastic bundles. An outer rope is tied to protect the tubing and they are packed in wooden box or container. M P Jain Provide Stainless Steel 304L Welded U Tube and SS 304L Seamless U Tube with all necessary documents such as commercial invoice, packing list, Test Reports, HS Code, Country of Origin attested by the chamber of commerce, Fumigation Certificate, Warranty Letter, and Base Material Certificates. Every lot is supplied with a material test certificate as per EN 10204 NACE 3.1 standards indicating the chemical and mechanical properties of the U Tubes. We also confirm the guarantee of the tubes supplied as per Purchase order specifications and attest the same in the Material Test Certificate. We also welcome any third party inspection from an agency nominated by the customer to comply with NACE 3.2 Certification if required by the customer at an extra cost.
Stainless Steel 316Ti U Tube
Brand | M P Jain |
Shape | Round |
Usage/Application | Pipes for Engineering purpose |
Unit Pipe Length | 3 meter |
Material Grade | SS316Ti |
Material | Stainless Steel |
Out Diameter | 273 mm |
Wall Thickness | 3.68 mm |
We provide SS 316ti Seamless U Tube and SS 316ti Welded U Tube which comply with international standards. Our specialty includes Stainless Steel S31635 U Tubes which are cold-rolled precision strips used for technical applications. We also manufacture Stainless Steel 1.4571 Seamless U Tubes to tightly defined specifications. Our ASTM A213 TP304 Welded U Tube are better alternatives to carbon steel products, because of its increased resistance to corrosion. The Stainless Steel 316ti U Tube we manufacture are made to tightly defined strengths, surface tension and texture.
SS 316Ti Seamless U Tubing is used in various applications of industries due to its excellent properties. These stainless tubes are often used for screening applications such as Propeller Shafts, Pulp and Paper Industry, Heat Exchangers, Fittings, Marine Environments, Oil and Gas Refineries, Condensers, Power Generation, etc. Apart from these applications, these stainless tubes are also used in Chemical and Sea Water Equipments.
Stainless Steel 316Ti U Tube Chemical Composition:
GRADE |
C |
MN |
SI |
P |
S |
CR |
MO |
NI |
N |
|
316Ti |
min. |
|
|
|
|
|
16.0 |
2.00 |
10.0 |
|
max. |
0.08 |
2.0 |
0.75 |
0.045 |
0.030 |
18.0 |
3.00 |
14.0 |
|
SS 316Ti Welded U Tubes Mechanical Properties:
GRADE |
TENSILE STRENGTH (MPA) MIN |
YIELD STRENGTH 0.2% PROOF (MPA) MIN |
ELONGATION (% IN 50MM) MIN |
HARDNESS |
|
ROCKWELL B (HR B) MAX |
BRINELL (HB) MAX |
||||
316Ti |
515 |
205 |
35 |
75 |
205 |
Stainless Steel 316Ti Seamless U Tubes Equivalent Grades:
GRADE |
UNS NO |
OLD BRITISH |
EURONORM |
GOST |
JAPANESE JIS |
||
BS |
EN |
NO |
AFNOR |
||||
316Ti |
S31635 |
320S31 |
X6CrNiMoTi17-12-2 |
1.4571 |
Z6CNDT17???12 |
08Ch17N13M2T |
SUS 316Ti |
Stainless Steel 316Ti Seamless & Welded U Tubes, SS JIS SUS 316Ti U Tubing Supplier, Stainless Steel DIN 1.4571 Seamless U Tubes, Stainless Steel BS 316S11 / 316S13 U Bend Tubing Exporter in Dubai, SS 316Ti Seamless U Tubing, Stainless Steel GOST 08Ch17N13M2T Welded U Tubing, Stainless Steel 316Ti U Tubes, Suppliers and Stockiest of SS UNS S31635 U Tube, SS EN X6CrNiMoTi17-12-2 U Tubing Manufacturer in India.
Additional Information:
- Pay Mode Terms: L/C (Letter of Credit),T/T (Bank Transfer),D/P,D/A
- Packaging Details: ASTM A213 Stainless Steel 316Ti U Tubes are surface wash and clean to remove all impurities and stock in the warehouse. Then it is wrapped in thin plastic and also it ends are protected by plastic caps to avoid any damage in transit. Stainless Steel 316Ti Welded U Tubing is bundled in bubble wrap followed by assorting them in colored plastic bundles. An outer rope is tied to protect the tubing and they are packed in wooden box or container. M P Jain Provide Stainless Steel 316Ti Welded U Tube and SS 316Ti Seamless U Tube with all necessary documents such as commercial invoice, packing list, Test Reports, HS Code, Country of Origin attested by the chamber of commerce, Fumigation Certificate, Warranty Letter, and Base Material Certificates. Every lot is supplied with a material test certificate as per EN 10204 NACE 3.1 standards indicating the chemical and mechanical properties of the Instrumentation Tubes. We also confirm the guarantee of the tubes supplied as per Purchase order specifications and attest the same in the Material Test Certificate. We also welcome any third party inspection from an agency nominated by the customer to comply with NACE 3.2 Certification if required by the customer at an extra cost.
Stainless Steel 304 U Tubes
Brand | MPJ |
Diameter | 50 mm OD |
Shape | Round |
Material Grade | SS304 |
Material | Stainless Steel |
Application | Desalination Plants |
Thickness | 3.68 mm |
M P Jain Tubing Solutions is one of the large stockiest for high quality SS 304 Seamless U Tube. The manufacturing of Stainless Steel S30400 U Bend tube bending equipment that is used exclusively for stainless tube bending as per drawing & specification given by customer. SS 304 Welded U Tubes are widely used in Heat Exchanger System. SS 1.4301 Seamless U Tubes are available in various and also in customized sizes and shapes at affordable rates to our clients. ASTM A213 TP304 Stainless Steel Welded U tube is essential in strategically important and critical fields - Petrochemical Machine Building and Nuclear.
Our SS 304 U Bend Tubes are used for the heat exchanger, boiler, cooling, water feeding, heating or re-heating of fluids, gases, or air in a wide range of industries, such as chemical processing, hydro carbon processing and oil refining, nuclear power generation and aerospace.
Stainless Steel 304 U Tube Chemical Composition:
ELEMENT |
C |
MN |
P |
S |
SI |
CR |
NI |
MO |
TI |
NB |
N |
SS 304 |
0.08 |
2 |
0.045 |
0.03 |
0.75 |
18.0-20.0 |
8.0-11.0 |
- |
- |
- |
- |
SS 304 Seamless U Tubes Mechanical Properties:
ELEMENT |
DENSITY |
MELTING POINT |
TENSILE STRENGTH |
YIELD STRENGTH (0.2%OFFSET) |
ELONGATION |
SS 304 |
8.0 g/cm3 |
1400 °C (2550 °F) |
Psi – 75000 , MPa – 515 |
Psi – 30000 , MPa – 205 |
35 % / 40% |
Stainless Steel 304 Welded U Tubes Equivalent Grades:
STANDARD |
WERKSTOFF NR. |
UNS |
JIS |
BS |
GOST |
AFNOR |
EN |
SS 304 |
1.4301 |
S30400 |
SUS 304 |
304S31 |
08??18??10 |
Z7CN18???09 |
X5CrNi18-10 |
Stainless Steel BS 304S31 U Bend Tubing Exporter in Dubai, SS 304 Seamless U Tubing, Stainless Steel GOST 08??18??10 Welded U Tubing, Stainless Steel 304 U Tubes, Suppliers and Stockiest of SS UNS S30400 U Tube, Stainless Steel 304 Seamless & Welded U Tubes, SS JIS SUS 304 U Tubing Supplier, Stainless Steel DIN 1.4301 Seamless U Tubes, SS EN X5CrNi18-10 U Tubing Manufacturer in India.
Additional Information:
- Packaging Details: ASTM A213 Stainless Steel 304 U Tubes are surface wash and clean to remove all impurities and stock in the warehouse. Then it is wrapped in thin plastic and also it ends are protected by plastic caps to avoid any damage in transit. Stainless Steel 304 Seamless U Tubing is bundled in bubble wrap followed by assorting them in colored plastic bundles. An outer rope is tied to protect the tubing and they are packed in wooden box or container. M P Jain Provide SS 304 Seamless U Tube and Stainless Steel 304 Welded U Tube with all necessary documents such as commercial invoice, packing list, Test Reports, HS Code, Country of Origin attested by the chamber of commerce, Fumigation Certificate, Warranty Letter, and Base Material Certificates. Every lot is supplied with a material test certificate as per EN 10204 NACE 3.1 standards indicating the chemical and mechanical properties of the Instrumentation Tubes. We also confirm the guarantee of the tubes supplied as per Purchase order specifications and attest the same in the Material Test Certificate. We also welcome any third party inspection from an agency nominated by the customer to comply with NACE 3.2 Certification if required by the customer at an extra cost.
Stainless Steel 304H U Tube
Bend Radius | 3D |
Usage/Application | Desalination Plants |
Material | Stainless Steel |
Grade | SS304H |
Shape | U |
Country of Origin | Made in India |
Thickness | 3.68 mm |
Outer Diameter | 273 mm |
M P Jain Tubing Solutions are specializing in the production of SS 304H Seamless U Tubes. Our all range of products is widely used in industrial demanding and critical applications. With many years of experience and delivering quality products, we have won domestic and international customer recognition and support.
The Stainless Steel 304H Welded U Tube has certain level of corrosion resistance with good strength. The cost effectiveness of the Alloy 304H U Tubing make it adopted over a wide range of applications. The Stainless Steel S30409 U Tube has chromium and nickel components in the composition and it comes in different types such as the SS 1.4301 Seamless U Tubing and the electric resistance welded tubing.
The ASTM A213 TP304H Welded U Tubes is used in petroleum, pharmaceutical, oil and gas, marine and other industries.
Stainless Steel 304H U Tube Chemical Composition:
GRADE |
C |
MN |
SI |
P |
S |
CR |
MO |
NI |
N |
304H |
0.08 |
2.0 |
0.75 |
0.045 |
0.030 |
18.0-20.0 |
- |
8.0-10.5 |
0.10 |
SS 304H Seamless U Tubes Mechanical Properties:
MATERIAL |
TENSILE STRENGTH (MPA) MIN |
YIELD STRENGTH 0.2% PROOF (MPA) MIN |
ELONGATION (% IN 50MM) MIN |
HARDNESS |
|
ROCKWELL B (HR B) MAX |
BRINELL (HB) MAX |
||||
TP304H |
515 |
205 |
40 |
92 |
201 |
Stainless Steel 304H Welded U Tubes Equivalent Grades:
GRADE |
UNS NO |
OLD BRITISH |
EURONORM |
SWEDISH SS |
JAPANESE JIS |
||
BS |
EN |
NO |
NAME |
||||
304H |
S30409 |
304S31 |
58E |
1.4301 |
X5CrNi18-10 |
2332 |
SUS 304H |
We are the Manufacturer & Stockists of Highest Quality and Best in Price Stainless Steel S30409 U Tube, ASTM A213 Stainless Steel U Tubes, SS 304H Seamless U Tubes, Stainless Steel 1.4301 Welded Tube, Stainless Steel 304H Seamless U Tube, 304H SS U Tubing Manufacturer in India, SS 304H Welded U Tubes Supplier in Quatar, 304H U Tubes Exporter in Australia, ASTM A312 TP304H Stainless Steel U Tubes, Stainless Steel 304H U Tubing Stockiest in India.
Additional Information:
- Packaging Details: ASTM A213 Stainless Steel 304H U Tubes are surface wash and clean to remove all impurities and stock in the warehouse. Then it is wrapped in thin plastic and also it ends are protected by plastic caps to avoid any damage in transit. Stainless Steel 304H Seamless U Tubing is bundled in bubble wrap followed by assorting them in colored plastic bundles. An outer rope is tied to protect the tubing and they are packed in wooden box or container. M P Jain Provide SS 304H Seamless U Tube and Stainless Steel 304H Welded U Tube with all necessary documents such as commercial invoice, packing list, Test Reports, HS Code, Country of Origin attested by the chamber of commerce, Fumigation Certificate, Warranty Letter, and Base Material Certificates. Every lot is supplied with a material test certificate as per EN 10204 NACE 3.1 standards indicating the chemical and mechanical properties of the Instrumentation Tubes. We also confirm the guarantee of the tubes supplied as per Purchase order specifications and attest the same in the Material Test Certificate. We also welcome any third party inspection from an agency nominated by the customer to comply with NACE 3.2 Certification if required by the customer at an extra cost.
Stainless Steel 316 U Tube
Material | SS |
Bend Radius | 5D |
Usage/Application | Pipes for Engineering |
Thickness | 3.68 mm |
Grade | SS316 |
Shape | U |
Country of Origin | Made in India |
Outer Diameter | 273 mm |
Stainless Steel 316 U Tube are available as seamless, for pressure applications, and welded, for structural applications. SS S31600 Seamless Tubing contains additional molybdenum and nickel than 304 stainless, which increases corrosion resistance of the metal. Stainless Steel 1.4401 / 1.4436 U Tube used for tube in more aggressive environments than 304 tube. SS 316 Seamless U Tube is used for structural applications such as handrails, machine supports for processing equipment and architectural supports. Stainless Steel 316 U Tube is used mainly as seamless for pressure operations in extremely corrosive environments, such as acid processing and waste treatment equipment and salt water marine applications.
M P Jain Tubing Solutions Supply Stainless Steel 316 U Tube supplier, these SS Seamless 316 U Tube after all quality parameters checks by experienced and good knowledge staff. We have huge inventory of Stainless Steel 316 U Bend Tubes in both form Seamless and welded.
Stainless Steel 316 U Tube Chemical Composition:
GRADES |
UNS |
C |
MN |
P |
S |
SI |
CR |
NI |
MO |
TI |
NB |
N |
SS 316 |
S3160 |
0.08 |
2 |
0.045 |
0.03 |
1 |
16.0-18.0 |
11.0-14.0 |
2.0-3.0 |
|
|
|
SS 316 Seamless U Tubes Mechanical Properties:
MATERIAL |
HEAT |
TEMPERURE |
TENSILE STRENGTH |
YIELD STRENGTH |
ELONGATION %, MIN |
TREATMENT |
MIN. |
KSI (MPA), MIN. |
KSI (MPA), MIN. |
||
F( C) |
|||||
SS 316 |
Solution |
1900(1040) |
75(515) |
30(205) |
35 |
Stainless Steel 316 Welded U Tubes Equivalent Grades:
STANDARD |
WERKSTOFF NR. |
UNS |
JIS |
BS |
GOST |
AFNOR |
EN |
SS 316 |
1.4401 / 1.4436 |
S31600 |
SUS 316 |
316S31 / 316S33 |
|
Z7CND17???11???02 |
X5CrNiMo17-12-2 / X3CrNiMo17-13-3 |
Stainless Steel 316 Seamless & Welded U Tubes, SS JIS SUS 316 U Tubing Supplier, Stainless Steel DIN 1.4401 / 1.4436 Seamless U Tubes, Stainless Steel BS 316S31 / 316S33 U Bend Tubing Exporter in Dubai, SS 316 Seamless U Tubing, Stainless Steel AFNOR Z7CND1711???02 Welded U Tubing, Stainless Steel 316 U Tubes, Suppliers and Stockiest of SS UNS S31600 U Tube, SS EN X5CrNiMo17-12-2 / X3CrNiMo17-13-3 U Tubing Manufacturer in India.
Additional Information:
- Packaging Details: ASTM A213 Stainless Steel 316 U Tubes are surface wash and clean to remove all impurities and stock in the warehouse. Then it is wrapped in thin plastic and also it ends are protected by plastic caps to avoid any damage in transit. Stainless Steel 316 Seamless U Tubing is bundled in bubble wrap followed by assorting them in colored plastic bundles. An outer rope is tied to protect the tubing and they are packed in wooden box or container. M P Jain Provide SS 316 Seamless U Tube and Stainless Steel 316 Welded U Tube with all necessary documents such as commercial invoice, packing list, Test Reports, HS Code, Country of Origin attested by the chamber of commerce, Fumigation Certificate, Warranty Letter, and Base Material Certificates. Every lot is supplied with a material test certificate as per EN 10204 NACE 3.1 standards indicating the chemical and mechanical properties of the Instrumentation Tubes. We also confirm the guarantee of the tubes supplied as per Purchase order specifications and attest the same in the Material Test Certificate. We also welcome any third party inspection from an agency nominated by the customer to comply with NACE 3.2 Certification if required by the customer at an extra cost.
Stainless Steel 316L U Tubes
Brand | MPJ |
Diameter | 273 mm OD |
Shape | Round |
Usage/Application | Oil & Gas Exploration |
Material Grade | SS316L |
Material | Stainless Steel |
Thickness | 3.68 mm |
M P Jain Tubing Solutions is a leading exporter, manufacturer and stockholder of SS 316L Seamless U Tubes, These Stainless Steel 316L Welded U Tubes exporter are available in both welded and seamless form in OD and NB sizes. In addition to standard sizes, which are available in stock. We have our specialization into manufacturing and exporting custom size 316L u tubes from our factory.
Alloy 316L grade is the standard molybdenum-bearing austenitic SS grade. The molybdenum content offers overall corrosion resistance properties. Its austenitic structure provides excellent toughness in lower cryogenic temperatures. It has higher resistance to pitting and crevice corrosion cracking even in high levels of chloride environments. These are easily formable with the standard thermal process.
We are a highly acclaimed distributor, stockiest and exporter of Stainless Steel S31603 Seamless U Tubing in all finishes. We are Exporters & Manufacturer of SS 1.4404 / 1.4435 U Tube in India which is manufactured by worlds leading mills.
Stainless Steel 316L U Tube Chemical Composition:
GRADE |
C |
MN |
P |
S |
SI |
CR |
NI |
MO |
TI |
NB |
N |
316L |
0.035 |
2 |
0.045 |
0.03 |
1 |
16.0-18.0 |
10.0-14.0 |
2.0-3.0 |
- |
- |
- |
SS 316L Welded U Tubes Mechanical Properties:
MATERIAL |
HEAT |
TEMPERURE |
TENSILE STRENGTH |
YIELD STRENGTH |
ELONGATION %, MIN |
TREATMENT |
MIN. |
KSI (MPA), MIN. |
KSI (MPA), MIN. |
||
F( C) |
|||||
SS 316L |
Solution |
1900(1040) |
70(485) |
25(170) |
35 |
Stainless Steel 316L Seamless U Tubes Equivalent Grades:
STANDARD |
WERKSTOFF NR. |
UNS |
JIS |
BS |
GOST |
AFNOR |
EN |
SS 316L |
1.4404 / 1.4435 |
S31603 |
SUS 316L |
316S11 / 316S13 |
03Ch17N14M3 / 03Ch17N14M2 |
Z3CND17???11???02 / Z3CND18???14???03 |
X2CrNiMo17-12-2 / X2CrNiMo18-14-3 |
Stainless Steel 316L Seamless & Welded U Tubes, SS JIS SUS 316L U Tubing Supplier, Stainless Steel DIN 1.4404 / 1.4435 Seamless U Tubes, Stainless Steel BS 316S11 / 316S13 U Bend Tubing Exporter in Dubai, SS 316L Seamless U Tubing, Stainless Steel GOST 03Ch17N14M3 / 03Ch17N14M2 Welded U Tubing, Stainless Steel 316L U Tubes, Suppliers and Stockiest of SS UNS S31603 U Tube, SS EN X2CrNiMo17-12-2 / X2CrNiMo18-14-3 U Tubing Manufacturer in India.
Additional Information:
- Packaging Details: ASTM A213 Stainless Steel 316L U Tubes are surface wash and clean to remove all impurities and stock in the warehouse. Then it is wrapped in thin plastic and also it ends are protected by plastic caps to avoid any damage in transit. Stainless Steel 316L Welded U Tubing is bundled in bubble wrap followed by assorting them in colored plastic bundles. An outer rope is tied to protect the tubing and they are packed in wooden box or container. M P Jain Provide Stainless Steel 316L Welded U Tube and SS 316L Seamless U Tube with all necessary documents such as commercial invoice, packing list, Test Reports, HS Code, Country of Origin attested by the chamber of commerce, Fumigation Certificate, Warranty Letter, and Base Material Certificates. Every lot is supplied with a material test certificate as per EN 10204 NACE 3.1 standards indicating the chemical and mechanical properties of the Instrumentation Tubes. We also confirm the guarantee of the tubes supplied as per Purchase order specifications and attest the same in the Material Test Certificate. We also welcome any third party inspection from an agency nominated by the customer to comply with NACE 3.2 Certification if required by the customer at an extra cost.
Stainless Steel 310H U Tube
Bend Radius | 3D |
Thickness | 3.68 mm |
Usage/Application | Pipes for Engineering |
Material | Stainless Steel |
Grade | SS310H |
Shape | U |
Country of Origin | Made in India |
Outer Diameter | 273 mm |
M P Jain Tubing Solutions is one of the professional supplier and manufacturer of Stainless Steel 310H U Tube all over the globe. Our endeavor is to provide complete business solutions along with efficiency, reliability, and creativeness to worldwide customers. We cover all the requirements of tubes in different standards, specifications, designations, and dimensions.
Tests performed on products:
- Mechanical properties testing, hardness test, tensile test, PMI test, hydro testing, destructive/non-destructive test, intergranular corrosion test, flaring test, ultrasonic test, radiography, and pitting corrosion tests are performed by us.
Documentations:
- We attach some documents along with products those are Product invoice, welding guide, specification guide, disinfection certificates, raw material test report, mill test report, quality assurance plan, heat treatment charts and Certificate origin by legalized manufacturers.
Stainless Steel 310H U Tube Chemical Composition:
GRADE |
C |
MN |
SI |
P |
S |
CR |
MO |
NI |
N |
|
310H |
min. |
0.04 |
|
|
|
|
24.0 |
|
19.0 |
|
max. |
0.10 |
2.0 |
1.0 |
0.045 |
0.030 |
26.0 |
21.0 |
|
SS 310H Welded U Tubes Mechanical Properties:
GRADE |
TENSILE STRENGTH (MPA) MIN |
YIELD STRENGTH 0.2% PROOF (MPA) MIN |
ELONGATION (% IN 50MM) MIN |
HARDNESS |
|
ROCKWELL B (HR B) MAX |
BRINELL (HB) MAX |
||||
310H |
515 |
205 |
40 |
95 |
217 |
Stainless Steel 310H Seamless U Tubes Equivalent Grades:
GRADE |
UNS NO |
OLD BRITISH |
EURONORM |
SWEDISH SS |
JAPANESE JIS |
||
BS |
EN |
NO |
NAME |
||||
310H |
S31009 |
|
X5CrNi18-10 |
2332 |
SUS 310H |
Stainless Steel S31009 Seamless U Tubes, Stainless Steel 310H U Bend Tubing Exporter in Dubai, Stainless Steel 310H Welded U Tubing, Stainless Steel 310H U Tubes, Suppliers and Stockiest of SS UNS S31009 U Tube, Stainless Steel 310H Seamless & Welded U Tubes, SS JIS SUS 310H U Tubing Supplier, SS 310H Seamless U Tubing, SS 310H U Tubing Manufacturer in India.
Additional Information:
- Packaging Details: ASTM A213 Stainless Steel 310H U Tubes are surface wash and clean to remove all impurities and stock in the warehouse. Then it is wrapped in thin plastic and also it ends are protected by plastic caps to avoid any damage in transit. Stainless Steel 310H Seamless U Tubes is bundled in bubble wrap followed by assorting them in colored plastic bundles. An outer rope is tied to protect the tubing and they are packed in wooden box or container. M P Jain Provide Stainless Steel 310H Welded U Tube and SS 310H Seamless U Tube with all necessary documents such as commercial invoice, packing list, Test Reports, HS Code, Country of Origin attested by the chamber of commerce, Fumigation Certificate, Warranty Letter, and Base Material Certificates. Every lot is supplied with a material test certificate as per EN 10204 NACE 3.1 standards indicating the chemical and mechanical properties of the Instrumentation Tubes. We also confirm the guarantee of the tubes supplied as per Purchase order specifications and attest the same in the Material Test Certificate. We also welcome any third party inspection from an agency nominated by the customer to comply with NACE 3.2 Certification if required by the customer at an extra cost.
Stainless Steel 316H U Tube
Material | SS |
Bend Radius | 5D |
Usage/Application | Nuclear and Solar Power Plants |
Thickness | 3.68 mm |
Grade | SS316H |
Shape | U |
Country of Origin | Made in India |
Outer Diameter | 273 mm |
M P Jain Tubing Solutions aims to fulfil demand and requirements of customers. Moreover, for this they produce accurate length and sizes of ASTM A213 SS TP316H Seamless U Tubing.
Moreover, in heavy gauge seamless/welded components our product is widely used. Excellent resistance to corrosion, supreme finished attributes and, durability are carried with this seamless tubing. Henceforth, in applications where elevated temperatures are present Stainless Steel S31609 U Tubing are higher carbons variant. However, to meet your requirements tubes can be fabricated or machined. The scope of SS 1.4401 Welded U Tube is very wide. They are often used in paper, mining, petroleum, chemical, food and, pharmaceutical industries.
The product is known for its properties and, exceptional features. Tubing’s are tested on various quality standards and, are available in welded, seamless forms. Testing is a great priority in the manufacturing industry to assure quality.
Stainless Steel 316H U Tube Chemical Composition:
GRADE |
C |
MN |
SI |
P |
S |
CR |
MO |
NI |
N |
|
316H |
min. |
0.04 |
– |
– |
– |
– |
24.0 |
– |
19.0 |
– |
max. |
0.10 |
2.0 |
1.00 |
0.045 |
0.03 |
26.0 |
21.0 |
– |
SS 316H Seamless U Tubes Mechanical Properties:
GRADE |
TENSILE STRENGTH (MPA) MIN |
YIELD STRENGTH 0.2% PROOF (MPA) MIN |
ELONGATION (% IN 50MM) MIN |
HARDNESS |
|
ROCKWELL B (HR B) MAX |
BRINELL (HB) MAX |
||||
316H |
515 |
205 |
40 |
95 |
217 |
Stainless Steel 316H Welded U Tubes Equivalent Grades:
GRADE |
NORTH AMERICA |
FRANCE |
EUROPEAN |
JAPAN |
RUSSIA |
EUROPEAN |
ITALY |
AUSTRIA |
USA |
UNS |
AFNOR |
W.N. |
JIS |
GOST |
EN |
UNI |
ONORM |
AISI |
|
SS 316H |
S31609 |
2 CND 17-12 |
1.4401 |
– |
– |
– |
– |
– |
AISI 316H |
Additional Information:
- Packaging Details: ASTM A213 Stainless Steel 316H U Tubes are surface wash and clean to remove all impurities and stock in the warehouse. Then it is wrapped in thin plastic and also it ends are protected by plastic caps to avoid any damage in transit. Stainless Steel 316H Seamless U Tubing is bundled in bubble wrap followed by assorting them in colored plastic bundles. An outer rope is tied to protect the tubing and they are packed in wooden box or container. M P Jain Provide SS 316H Seamless U Tube and Stainless Steel 316H Welded U Tube with all necessary documents such as commercial invoice, packing list, Test Reports, HS Code, Country of Origin attested by the chamber of commerce, Fumigation Certificate, Warranty Letter, and Base Material Certificates. Every lot is supplied with a material test certificate as per EN 10204 NACE 3.1 standards indicating the chemical and mechanical properties of the Instrumentation Tubes. We also confirm the guarantee of the tubes supplied as per Purchase order specifications and attest the same in the Material Test Certificate. We also welcome any third party inspection from an agency nominated by the customer to comply with NACE 3.2 Certification if required by the customer at an extra cost.
SS 310 Seamless U Tubing
Brand | MPJ |
Material Standard | ASTM 213 |
Material | Stainless Steel |
Grade | SS310 |
Surface Finish | Mill Finished |
Usage/Application | Pharmaceutical |
Outer Diameter | 273 mm |
Thickness | 3.68 mm |
At M P Jain Tubing Solutions, we maintain the superior quality stock of stainless steel materials. Amongst, one of the well-admired grades of stainless tubes is SS 310 Seamless U Tubing. Specifically, this grade possesses some incredible properties.
Stainless Steel 310 Welded U Tube are mostly considered for the high-stress and pressure conditions. Additionally, they exercise good quenching as well as tempering behaviours. SS 310 grades show excellent tensile and yield strengths. These grades are put above the iron materials now because of their marvelous corrosion resistance and protection from decay even in many hostile environments.
Stainless Steel S31000 Seamless U Tube is accessible in vast variety whether it is the pipe end types, formation types, polishing types, and much forth. They are practicing superb mechanical properties like these both grades have electrical resistivity till 720 (n. m) which is considered better than many other 300 grades.SS 310 Seamless U Tubes, Stainless Steel 1.4841 Welded Tube, ASTM A312 TP310 Stainless Steel U Tubes, Stainless Steel 310 Seamless U Tube, 310 SS U Tubing Manufacturer in India, SS 310 Welded U Tubes Supplier in Quatar, 310 U Tubes Exporter in Australia, We are the Manufacturer & Stockists of Highest Quality and Best in Price Stainless Steel S31000 U Tube, ASTM A213 Stainless Steel U Tubes, Stainless Steel 310 U Tubing Stockiest in India.
Stainless Steel 310 Seamless U Tube Chemical Composition:
GRADE |
C |
MN |
SI |
P |
S |
CR |
MO |
NI |
N |
310 |
0.015 max |
2.0 max |
0.15 max |
0.020 max |
0.015 max |
24.00 26.00 |
0.10 max |
19.00 21.00 |
54.7 min |
SS 310 Welded U Tubes Mechanical Properties:
MATERIAL |
TENSILE STRENGTH (MPA) MIN |
YIELD STRENGTH 0.2% PROOF (MPA) MIN |
ELONGATION (% IN 50MM) MIN |
310 |
Psi 75000 , MPa 515 |
Psi 30000 , MPa 205 |
40 % |
Stainless Steel 310 Seamless U Tubes Equivalent Grades:
GRADE |
WERKSTOFF NR. |
UNS |
310 |
1.4841 |
S31000 |
Stainless Steel GOST 20Ch25N20S2 Welded U Tubing, Stainless Steel 310 U Tubes, Suppliers and Stockiest of SS UNS S31000 U Tube, Stainless Steel 310 Seamless & Welded U Tubes, SS JIS SUS 310 U Tubing Supplier, Stainless Steel DIN 1.4841 Seamless U Tubes, Stainless Steel 310 U Bend Tubing Exporter in Dubai, SS 310 Seamless U Tubing, SS EN X15CrNi25-20 U Tubing Manufacturer in India.
Additional Information:
- Packaging Details: ASTM A213 Stainless Steel 310 U Tubes are surface wash and clean to remove all impurities and stock in the warehouse. Then it is wrapped in thin plastic and also it ends are protected by plastic caps to avoid any damage in transit. Stainless Steel 310 Seamless U Tubes is bundled in bubble wrap followed by assorting them in colored plastic bundles. An outer rope is tied to protect the tubing and they are packed in wooden box or container. M P Jain Provide Stainless Steel 310 Welded U Tube and SS 310 Seamless U Tube with all necessary documents such as commercial invoice, packing list, Test Reports, HS Code, Country of Origin attested by the chamber of commerce, Fumigation Certificate, Warranty Letter, and Base Material Certificates. Every lot is supplied with a material test certificate as per EN 10204 NACE 3.1 standards indicating the chemical and mechanical properties of the Instrumentation Tubes. We also confirm the guarantee of the tubes supplied as per Purchase order specifications and attest the same in the Material Test Certificate. We also welcome any third party inspection from an agency nominated by the customer to comply with NACE 3.2 Certification if required by the customer at an extra cost.
Stainless Steel 310S U Tube
Bend Radius | 5D |
Usage/Application | Solar Power Plants |
Thickness | 3.68 mm |
Grade | SS310S |
Shape | U |
Material | Stainless Steel |
Outer Diameter | 273 mm |
M P Jain Tubing Solutions is one of the well-known organizations. We are involved in stockiest, manufacturing and supplying these SS 310S Seamless U Tubes. We are manufacturing these Stainless Steel 310S Welded U Tubes in various shapes and sizes. We also produce customized SS Seamless/Welded U Tubes as per the need and demand of our clients. We are offering an extensive range of Welded U Tubes, which meets all the requirements of our valued clients. The SS S31008 U Tubes that we are manufacturing are durable and can be used for multiple purposes.
These Stainless Steel 1.4845 U Tubes also offers excellent benefits like high-temperature performance, superior strength, and also can use at cryogenic temperatures. It has astounding sturdiness at high temperatures. Stainless Steel 310S Seamless/Welded U Tube are accessible in both consistent and welded structures in various sizes. By considering the requirements of our esteem clients, we are manufacturing these ASTM A213 TP304 SS U Tubes in customized as well as non-customized forms.
Stainless Steel 310S U Tube Chemical Composition:
GRADE |
C |
MN |
SI |
P |
S |
CR |
MO |
NI |
N |
|
310S |
min. |
- |
- |
- |
- |
- |
24.0 |
- |
19.0 |
- |
max. |
0.25 |
2.0 |
1.50 |
0.045 |
0.030 |
26.0 |
22.0 |
SS 310S Seamless U Tubes Mechanical Properties:
GRADE |
TENSILE STRENGTH (MPA) MIN |
YIELD STRENGTH 0.2% PROOF (MPA) MIN |
ELONGATION (% IN 50MM) MIN |
HARDNESS |
|
ROCKWELL B (HR B) MAX |
BRINELL (HB) MAX |
||||
310S |
515 |
205 |
40 |
95 |
217 |
Stainless Steel 310S Welded U Tubes Equivalent Grades:
GRADE |
WERKSTOFF NR. |
UNS |
JIS |
GOST |
EN |
310S |
1.4845 |
S31008 |
SUS 310S |
20Ch23N18 |
X8CrNi25-21 |
We are the Manufacturer & Stockists of Highest Quality and Best in Price Stainless Steel S31008 U Tube, ASTM A213 Stainless Steel U Tubes, SS 310S Seamless U Tubes, Stainless Steel 1.4845 Welded Tube, Stainless Steel 310S Seamless U Tube, 310S SS U Tubing Manufacturer in India, SS 310S Welded U Tubes Supplier in Quatar, 310S U Tubes Exporter in Australia, ASTM A312 TP310S Stainless Steel U Tubes, Stainless Steel 310S U Tubing Stockiest in India.
Additional Information:
- Packaging Details: ASTM A213 Stainless Steel 310S U Tubes are surface wash and clean to remove all impurities and stock in the warehouse. Then it is wrapped in thin plastic and also it ends are protected by plastic caps to avoid any damage in transit. Stainless Steel 310S Seamless U Tubing is bundled in bubble wrap followed by assorting them in colored plastic bundles. An outer rope is tied to protect the tubing and they are packed in wooden box or container. M P Jain Provide SS 310S Seamless U Tube and Stainless Steel 310S Welded U Tube with all necessary documents such as commercial invoice, packing list, Test Reports, HS Code, Country of Origin attested by the chamber of commerce, Fumigation Certificate, Warranty Letter, and Base Material Certificates. Every lot is supplied with a material test certificate as per EN 10204 NACE 3.1 standards indicating the chemical and mechanical properties of the Instrumentation Tubes. We also confirm the guarantee of the tubes supplied as per Purchase order specifications and attest the same in the Material Test Certificate. We also welcome any third party inspection from an agency nominated by the customer to comply with NACE 3.2 Certification if required by the customer at an extra cost.
Stainless Steel 317L U Tube
Bend Radius | 3D |
Usage/Application | Pipes for Engineering Purpose |
Thickness | 3.68 mm |
Grade | SS317L |
Shape | U |
Material | Stainless Steel |
Country of Origin | Made in India |
Outer Diameter | 273 mm |
M P Jain Tubing Solutions is one of the well-known stockiest, exporter and manufacturer of a qualitative range of SS 317/317L Welded U Tubes that are being designed as per the national and international standard quality of raw materials. We offer Stainless Steel 317/317L Seamless U Tubes in different sizes, thickness and standards as per made to order requirements given by our customers. ASTM A213 TP317 SS U Tube is molybdenum demeanour austenitic stainless steel, but in the company of higher molybdenum substance.
Grade 317/317L Stainless Steel U Tubes or DIN 1.4449/ 1.4438 Seamless U Tubes has a high tensile and creep strength at elevated temperatures. Due to its excellent corrosion resistance, it has been used in handling many of the chemicals used by the chemical process industries.
Stainless Steel 317/317L U Tube Chemical Composition:
GRADE |
C |
MN |
SI |
P |
S |
CR |
MO |
NI |
N |
|
317 |
min. |
– |
– |
– |
– |
– |
18.0 |
3.0-4.0 |
11.0 |
– |
max. |
0.08 |
2.0 |
1.0 |
0.040 |
0.030 |
20.0 |
14.0 |
– |
||
317L |
min. |
– |
– |
– |
– |
– |
18.0 |
3.0-4.0 |
11.0 |
– |
max. |
0.08 |
2.0 |
1.0 |
0.040 |
0.030 |
20.0 |
15.0 |
– |
SS 317/317L Welded U Tubes Mechanical Properties:
GRADE |
TENSILE STRENGTH (MPA) MIN |
YIELD STRENGTH 0.2% PROOF (MPA) MIN |
ELONGATION (% IN 50MM) MIN |
HARDNESS |
|
ROCKWELL B (HR B) MAX |
BRINELL (HB) MAX |
||||
317 |
515 |
205 |
35 |
75 |
205 |
317L |
515 |
205 |
35 |
75 |
205 |
Stainless Steel 317/317L Seamless U Tubes Equivalent Grades:
STANDARD |
WERKSTOFF NR. |
UNS |
JIS |
BS |
GOST |
AFNOR |
EN |
SS 317 |
1.4449 |
S31700 |
SUS 317 |
– |
– |
– |
– |
SS 317L |
1.4438 |
S31703 |
SUS 317L |
– |
– |
– |
X2CrNiMo18-15-4 |
Additional Information:
- Packaging Details: ASTM A213 SS 317/317L U Tubes are surface wash and clean to remove all impurities and stock in the warehouse. Then it is wrapped in thin plastic and also it ends are protected by plastic caps to avoid any damage in transit. Stainless Steel 317/317L Welded U Tubing is bundled in bubble wrap followed by assorting them in colored plastic bundles. An outer rope is tied to protect the tubing and they are packed in wooden box or container. M P Jain Provide SS 317 Welded U Tube and Stainless Steel 317L Seamless U Tube with all necessary documents such as commercial invoice, packing list, Test Reports, HS Code, Country of Origin attested by the chamber of commerce, Fumigation Certificate, Warranty Letter, and Base Material Certificates. Every lot is supplied with a material test certificate as per EN 10204 NACE 3.1 standards indicating the chemical and mechanical properties of the Instrumentation Tubes. We also confirm the guarantee of the tubes supplied as per Purchase order specifications and attest the same in the Material Test Certificate. We also welcome any third party inspection from an agency nominated by the customer to comply with NACE 3.2 Certification if required by the customer at an extra cost.
Stainless Steel 321H U Tube
Thickness | 3.68 mm |
Brand | MPJ |
Shape | Round |
Usage/Application | Oil & Gas Exploration |
Material Grade | SS321H |
Technique | Hot Rolled |
Material | Stainless Steel |
Outer Diameter | 273 mm |
If you are looking for ASTM A213 TP321 SS Seamless U Tubes Exporter, TP321/321H Stainless Steel Welded U Tubing to provide resistance to intergranular corrosion, 304L is the normal choice as it is a more commonly used and supplied steel. Stainless Steel 321 U Tubes are available in both seamless and welded form in OD and NB sizes.
They are always producing the SS S32100 Welded U Tube by using premium quality of raw material that results in adding superiority, durability, flexibility in the product quality. The producers are also making effective use of the latest tool, technology so that it can easily withstand heavy loads, have the ability to work in the high-temperature surrounding. Stainless Steel 1.4541 U Tubes are supplied to various parts of the globe in wide comprehensive range at reasonable rates.
Stainless Steel 321/321H U Tube Chemical Composition:
GRADE |
C |
MN |
SI |
P |
S |
CR |
N |
NI |
TI |
SS 321 |
0.08 max |
2.0 max |
1.0 max |
0.045 max |
0.030 max |
17.00 – 19.00 |
0.10 max |
9.00 – 12.00 |
5(C+N) – 0.70 max |
SS 321H |
0.04 – 0.10 |
2.0 max |
1.0 max |
0.045 max |
0.030 max |
17.00 – 19.00 |
0.10 max |
9.00 – 12.00 |
4(C+N) – 0.70 max |
SS 321/321H Welded U Tubes Mechanical Properties:
DENSITY |
MELTING POINT |
TENSILE STRENGTH |
YIELD STRENGTH (0.2%OFFSET) |
ELONGATION |
8.0 g/cm3 |
1457 °C (2650 °F) |
Psi – 75000 , MPa – 515 |
Psi – 30000 , MPa – 205 |
35 % |
Stainless Steel 321/321H Seamless U Tubes Equivalent Grades:
STANDARD |
WERKSTOFF NR. |
UNS |
JIS |
EN |
SS 321 |
1.4541 |
S32100 |
SUS 321 |
X6CrNiTi18-10 |
SS 321H |
1.4878 |
S32109 |
SUS 321H |
X12CrNiTi18-9 |
Stainless Steel JIS SUS 321H Welded U Tubing, Stainless Steel 321 U Tubes, Suppliers and Stockiest of SS UNS S32109 U Tube, Stainless Steel 321 Seamless & Welded U Tubes, SS JIS SUS 321H U Tubing Supplier, Stainless Steel DIN 1.4878 Seamless U Tubes, Stainless Steel S31703 U Bend Tubing Exporter in Dubai, SS 321 Seamless U Tubing, SS 321/321H U Tubing Manufacturer in India.
Additional Information:
- Packaging Details: ASTM A213 SS 321/321H U Tubes are surface wash and clean to remove all impurities and stock in the warehouse. Then it is wrapped in thin plastic and also it ends are protected by plastic caps to avoid any damage in transit. Stainless Steel 321/321H Welded U Tubing is bundled in bubble wrap followed by assorting them in colored plastic bundles. An outer rope is tied to protect the tubing and they are packed in wooden box or container. M P Jain Provide SS 321 Welded U Tube and Stainless Steel 321H Seamless U Tube with all necessary documents such as commercial invoice, packing list, Test Reports, HS Code, Country of Origin attested by the chamber of commerce, Fumigation Certificate, Warranty Letter, and Base Material Certificates. Every lot is supplied with a material test certificate as per EN 10204 NACE 3.1 standards indicating the chemical and mechanical properties of the Instrumentation Tubes. We also confirm the guarantee of the tubes supplied as per Purchase order specifications and attest the same in the Material Test Certificate. We also welcome any third party inspection from an agency nominated by the customer to comply with NACE 3.2 Certification if required by the customer at an extra cost.
Stainless Steel 904L U Tube
Size/Diameter | 273 mm OD |
Material | Stainless Steel |
Usage/Application | Fertilizer Plants |
Brand | MPJ |
Country of Origin | Made in India |
Material Grade | SS904L |
Surface Finished | Mill Finished |
Stainless Steel 904L U Tube are especially to handling sulfuric acid and phosphoric acid, though at high temperatures it may be subject to stress corrosion cracking. Stainless Steel 904L Seamless U Tubes are also known as UNS N08904 Tubes, WNR 1.4539 Tubes, EN X1NiCrMoCu25-20-5, KS STS 317J5L, and WERKSTOFF NR. 1.4539, BS 904S13, SUS 904l, SS2562 and DIN 17440. Stainless Steel 904L Welded U Tubes offers higher strength.
M P Jain Tubing Solutions is exporter and stockholder of SS 904L Seamless U Tubes. These Stainless Steel 904L Welded U Tube are well suited for moderate to high corrosion resistive environments. We manufacture SS N08904 U Tubes in various standards, designations and custom dimensions. Stainless Steel 1.4539 Seamless U Tube are ideal for environments where pitting and crevice is a concern.
Stainless Steel 904L U Tube Chemical Composition:
GRADE |
TEMPER |
C |
MN |
P |
S |
SI |
FE |
CR |
NI |
MO |
N |
CB |
904L |
Annealed |
0.02 |
2.00 |
0.04 |
0.030 |
1.00 |
- |
19.0-23..0 |
23.0-28.0 |
4.0-5.0 |
0.10 |
- |
SS 904L Welded U Tubes Mechanical Properties:
GRADE |
TENSILE STRENGTH (MPA) MIN |
YIELD STRENGTH 0.2% PROOF (MPA) MIN |
ELONGATION (% IN 50MM) MIN |
HARDNESS |
|
ROCKWELL B (HR B) MAX |
BRINELL (HB) MAX |
||||
904L |
490 |
220 |
35 |
70-90 typical |
- |
Stainless Steel 904L Seamless U Tubes Equivalent Grades:
GRADE |
WERKSTOFF NR. |
UNS |
JIS |
AFNOR |
BS |
KS |
EN |
904L |
1.4539 |
N08904 |
SUS 890L |
Z2 NCDU 25-20 |
904S13 |
STS 317J5L |
X1NiCrMoCu25-20-5 |
Stainless Steel 904L Seamless & Welded U Tubes, SS JIS SUS 904L U Tubing Supplier, Stainless Steel DIN 1.4539 Seamless U Tubes, Stainless Steel BS 904S13 U Bend Tubing Exporter in Dubai, SS 904L Seamless U Tubing, Stainless Steel AFNOR Z2 NCDU 25-20 Welded U Tubing, Stainless Steel 904L U Tubes, Suppliers and Stockiest of SS UNS N08904 U Tube, SS EN X1NiCrMoCu25-20-5 U Tubing Manufacturer in India.
Additional Information:
- Packaging Details: ASTM A213 Stainless Steel 904L U Tubes are surface wash and clean to remove all impurities and stock in the warehouse. Then it is wrapped in thin plastic and also it ends are protected by plastic caps to avoid any damage in transit. SS 904L Welded U Tubing is bundled in bubble wrap followed by assorting them in colored plastic bundles. An outer rope is tied to protect the tubing and they are packed in wooden box or container. M P Jain Provide SS 904L Welded U Tube and Stainless Steel 904L Seamless U Tube with all necessary documents such as commercial invoice, packing list, Test Reports, HS Code, Country of Origin attested by the chamber of commerce, Fumigation Certificate, Warranty Letter, and Base Material Certificates. Every lot is supplied with a material test certificate as per EN 10204 NACE 3.1 standards indicating the chemical and mechanical properties of the Instrumentation Tubes. We also confirm the guarantee of the tubes supplied as per Purchase order specifications and attest the same in the Material Test Certificate. We also welcome any third party inspection from an agency nominated by the customer to comply with NACE 3.2 Certification if required by the customer at an extra cost.
Stainless Steel 304H Seamless Pipe
Material | Stainless Steel |
Unit Pipe Length | 3 meter |
Brand | MPJ |
Usage/Application | Oil & Gas Exploration |
Thickness | 30mm |
Material Grade | SS 304H |
Surface Finish | Mill Finished |
M P Jain Tubing Solutions is acknowledged stockholder, manufacturer and exporter of Stainless Steel 304H Seamless Pipe. Grade “H” in SS 304H stands for “High Carbon Content”, indicating carbon content of not less than 0.04% and not more than 0.10%. The main advantage of Stainless Steel 304H Seamless Round Pipe tensile and yield strength is greater than 304L, as the higher carbon content increases its strength.
These ASTM A213 TP304H SS Seamless Pipes are probably the most consistently indicated and have come to speak to the encapsulation of the fundamental stainless item. As for national and worldwide nature of raw materials, M P Jzin Tubing Solutions likewise offer these Stainless Steel 304H SMLS Pipe in tweaked sizes and thicknesses according to particular requests by our regarded customers at business sector driving costs.
SS 304H Seamless Pipe Chemical Composition:
GRADE |
C |
MN |
SI |
P |
S |
CR |
MO |
NI |
N |
304H |
0.08 |
2.0 |
0.75 |
0.045 |
0.030 |
18.0-20.0 |
- |
8.0-10.5 |
0.10 |
SS 304H Seamless Pipe Mechanical Properties:
MATERIAL |
TENSILE STRENGTH (MPA) MIN |
YIELD STRENGTH 0.2% PROOF (MPA) MIN |
ELONGATION (% IN 50MM) MIN |
HARDNESS |
|
ROCKWELL B (HR B) MAX |
BRINELL (HB) MAX |
||||
TP304H |
515 |
205 |
40 |
92 |
201 |
Stainless Steel 304H SMLS Pipe Equivalent Grades:
GRADE |
UNS NO |
OLD BRITISH |
EURONORM |
SWEDISH SS |
JAPANESE JIS |
||
BS |
EN |
NO |
NAME |
||||
304H |
S30409 |
304S31 |
58E |
1.4301 |
X5CrNi18-10 |
2332 |
SUS 304H |
SS 304H SMLS Pipe, SS 304H Corrugates Seamless Pipe Supplier in Saudi Arabia, SS 304H Seamless Round Pipe Exporter in Australia, SS 304H SMSL Pipes Supplier in Germany, ASTM A312 TP304H Seamless Pipe, Stainless Steel 304H Seamless Pipe, Stainless Steel 1.4301 Seamless Pipes, Austenitic Stainless Steel 304H Seamless Pipe, SS 304H Seamless Pipes, 304H SS Seamless Pipe Manufacturer in India, Stainless Steel 304H Seamless Square Pipe Exporter, Stainless Steel 304H Seamless Rectangular Pipe Stockiest in India.
Additional Information:
- Packaging Details: ASTM A213 TP304H Stainless Steel Seamless Pipe are surface wash and clean to remove all impurities and stock in the warehouse. Then it is wrapped in thin plastic and also it ends are protected by plastic caps to avoid any damage in transit. Stainless Steel 304H SMLS Pipes is bundled in bubble wrap followed by assorting them in colored plastic bundles. An outer rope is tied to protect the tubing and they are packed in wooden box or container. M P Jain Provide SS 304H Seamless Pipe and Stainless Steel 304H SMLS Pipe with all necessary documents such as commercial invoice, packing list, Test Reports, HS Code, Country of Origin attested by the chamber of commerce, Fumigation Certificate, Warranty Letter, and Base Material Certificates. Every lot is supplied with a material test certificate as per EN 10204 NACE 3.1 standards indicating the chemical and mechanical properties of the Instrumentation Tubes. We also confirm the guarantee of the tubes supplied as per Purchase order specifications and attest the same in the Material Test Certificate. We also welcome any third party inspection from an agency nominated by the customer to comply with NACE 3.2 Certification if required by the customer at an extra cost.
Stainless Steel Seamless U Tubes
Unit Pipe Length | 32 m |
Usage/Application | Industrial |
Country of Origin | Made in India |
Material | SS |
Usage | Industry |
Thickness | 12.7 mm |
Tube Coil | 50 m |
Outer Diameter | 6 mm |
- ASME/ASTM A-213, A-269, A-312, IBR, EN/DIN, EN, JIS, UNS, UNI, AFNOR NF.
- 6 mm OD to 219.1 mm OD
Certificates:
- ISO 9001 : 2008 / IBR / EIL /PED
Grades:
- TP-304, 304L, 304H, 304N, 304LN, 316, 316L, 316N, 316LN, 316TI, 316H, 321, 321H, 317, 317L, 347, 347H, 904L, 310S, 310H, 405, 410, 430
Ready Stock:
- Instrumentation Tubes , Heat Exchanger Tubes, Surgical Tubes & NB Size Pipe
TPI:
- EIL / IBR / IIB / TUV / CHEMPRO / RITES / DNV / BVIS / IRS / ICS / J&A / Lloyds Etc
Stainless Steel 347 Seamless U Tubes
Thickness | 3.68 mm |
Brand | MPJ |
Usage/Application | Oil & Gas Exploration |
Material Grade | SS 347 |
Material | Stainless Steel |
Surface Finish | Mill Finished |
Outer Diameter | 273 mm |
The industry is fully involved in offering the wider ranges of Stainless Steel 347 Seamless U Tubes that are designed according to national and international product quality standard. These grades tubing are created by using the best quality of raw materials and the accuracy workmanship adds in its low maintenance and long lasting features. The SS 347H Welded U Tube are made up of the excellent quality of seamless hollows that is collected from the reputable mills, according to the needs of esteem patrons.
With the support of the long standing relations with mills across the world we are able to draw upon a stocking capacity highest in India. Thus, as well as being able to offer “fast-track” deliveries from our own stock, we also have the possibility to offer large quantities for long-term projects using mill stock and production if necessary based upon new manufacture.
Stainless Steel 347/347H U Tube Chemical Composition:
GRADE |
TEMPER |
C |
MN |
P |
S |
SI |
FE |
CR |
NI |
MO |
N |
CB |
CO+TA |
TP347 |
Annealed |
0.08 |
2.00 |
0.045 |
0.030 |
1.00 |
- |
17.0-20.0 |
9.0-13.0 |
- |
- |
10XC-1.10 |
- |
TP347H |
Annealed |
0.04-0.10 |
2.0 |
0.045 |
0.030 |
1.0 |
- |
17.0-19.0 |
9.0-13.0 |
- |
- |
- |
8xC-1.0 |
SS 347/347H Welded U Tubes Mechanical Properties:
GRADE |
TENSILE STRENGTH (MPA) MIN |
YIELD STRENGTH 0.2% PROOF (MPA) MIN |
ELONGATION (% IN 50MM) MIN |
HARDNESS |
|
ROCKWELL B (HR B) MAX |
BRINELL (HB) MAX |
||||
347 |
515 |
205 |
40% |
92 |
201 |
347H |
515 |
205 |
35 |
92 |
201 |
Stainless Steel 347/347H Seamless U Tubes Equivalent Grades:
GRADE |
UNS NO |
OLD BRITISH |
EURONORM |
SWEDISH SS |
JAPANESE JIS |
||
BS |
EN |
NO |
NAME |
||||
347 |
S34700 |
347s31 |
58G |
1.4550 |
X6CrNiNb18-10 |
2338 |
SUS 347 |
347H |
S34709 |
- |
- |
1.4961 |
X6CrNiNb18-12 |
- |
SUS 347H |
Specifications:
- Thickness Range: 0.7 mm to 3.68 mm
- Outer Diameter Range: 6.35 to 273 mm
Additional Information:
- Packaging Details: ASTM A213 Stainless Steel 347/347H U Tubes are surface wash and clean to remove all impurities and stock in the warehouse. Then it is wrapped in thin plastic and also it ends are protected by plastic caps to avoid any damage in transit. SS 347/347H Welded U Tubing is bundled in bubble wrap followed by assorting them in colored plastic bundles. An outer rope is tied to protect the tubing and they are packed in wooden box or container. M P Jain Provide Stainless Steel 347 Welded U Tube and SS 347H Seamless U Tube with all necessary documents such as commercial invoice, packing list, Test Reports, HS Code, Country of Origin attested by the chamber of commerce, Fumigation Certificate, Warranty Letter, and Base Material Certificates. Every lot is supplied with a material test certificate as per EN 10204 NACE 3.1 standards indicating the chemical and mechanical properties of the Instrumentation Tubes. We also confirm the guarantee of the tubes supplied as per Purchase order specifications and attest the same in the Material Test Certificate. We also welcome any third party inspection from an agency nominated by the customer to comply with NACE 3.2 Certification if required by the customer at an extra cost.