Call 08048600090 88% Response Rate

Send Email

Instrumentation Valves

Manufacturer of a wide range of products which include brass ball valves, alloy steel manifold valves, carbon steel manifold valves, titanium manifold valves, hastelloy manifold valve and inconel manifold valves.
Brass Ball Valves

Brass Ball Valves

Product Price: Rs 200 / PieceGet Best Price

Product Details:
Usage/ApplicationDairy Food & Beverages
BrandMPJ
PressurePN16
Temperature Of MediaMedium Temperature
MaterialBrass
Working pressure3000 psig (206 bar)
StandardJIS
Material GradeBS 218

M P Jain Tubing Solutions is the leading manufacturer, supplier, stockiest, exporter of Brass instrumentation ball valves in various grades, specifications, designations, shapes, sizes and custom dimensions. We are dealing in Brass IS-319 / BS - 218 Instrumentation Ball Valves that are known for its features. This grade has excellent workability in terms of the most severe and reducing environments while resisting different kinds of corrosion. Brass Instrumentation Ball valves have been all around acknowledged and broadly utilized in an assortment of modern applications for a long time. Brass Instrumentation Ball valves oblige a wide scope of flow path, actuator, handling option and the wide range of adjustments. Brass Instrumentation Ball valves are the type of a quarter turn valve that uses perforated, hollow and pivoting ball to control the flow of fluid. These valves are durable and perform in different types of cycles. These valves are tough and act in various sorts of cycles. This quality makes them a phenomenal choice for shutoff and controlling applications. Brass Instrumentation Ball valves have supporting pressure up to 1000 bar in the temperature up to 752 deg F.

 

Brass BS - 218 Swing Out Ball Valves, Brass IS-319 / BS - 218 High Pressure Instrumentation Ball Valves, Brass Instrument Ball Valve, Brass IS-319 2 - Way Ball Valve, Brass BS - 218 Instrumentation Ball Valve, Brass IS-319 Flanged Ball Valve, Brass BS - 218 Trunnion Ball Valve Exporters, Brass IS-319 Three-piece Ball Valves, Brass IS-319 / BS - 218 Lined Ball Valves Supplier in Mumbai, India.


Brass IS-319 / BS - 218 Single-piece Ball Valve, Brass IS-319 Two-piece Ball Valves, Brass BS - 218 Encapsulated instrumentation Ball Valve, Brass IS-319 Floating Ball Valves, Brass BS - 218 Rising Stem Ball Valves, Brass IS-319 / BS - 218 Top Entry Ball Valves. Brass IS-319 / BS - 218 3 - way Ball Valves, Brass IS-319 Instrumentation Ball Valves, Brass BS - 218 Ball Valves , Brass IS-319 / BS - 218 One-Piece Instrumentation Ball Valves Manufacturers in Mumbai, India.



Additional Information:

  • Packaging Details: Brass Ball Valves are surface wash and clean to remove all impurities and stock in the warehouse. Then it is wrapped in thin plastic and also it ends are protected by plastic caps to avoid any damage in transit. Brass Ball Valves is bundled in bubble wrap followed by assorting them in colored plastic bundles. An outer rope is tied to protect the tubing and they are packed in wooden box or container. M P Jain Provide Brass Ball Valves with all necessary documents such as commercial invoice, packing list, Test Reports, HS Code, Country of Origin attested by the chamber of commerce, Fumigation Certificate, Warranty Letter, and Base Material Certificates. Every lot is supplied with a material test certificate as per EN 10204 NACE 3.1 standards indicating the chemical and mechanical properties of the Instrumentation Tubes. We also confirm the guarantee of the Brass Ball Valves supplied as per Purchase order specifications and attest the same in the Material Test Certificate. We also welcome any third party inspection from an agency nominated by the customer to comply with NACE 3.2 Certification if required by the customer at an extra cost.
Get Best QuoteRequest A Callback
Alloy Steel Manifold Valves

Alloy Steel Manifold Valves

Product Price: Rs 170 / PieceGet Best Price

Product Details:
Usage/ApplicationMobile Machinery
Pressure6000 psig @ 100 Degree F (414 barg @ 38 Degree C)
Size1"
BrandMPJ
Temperature1200 Degree F (648 Degree C)
MaterialAlloy Steel
GradeP91
M P Jain Tubing Solutions offers a series of compact Manifold Valves for use with pressure and differential pressure instruments. Alloy Steel manifold valves is utilized in quantities of applications from the mobile machinery to the heavier industrials tools. The valves are having well-improved effectiveness and diminished expenses. It is intended for the liquid level, static pressure and furthermore extraordinary weight applications. The valves are having a lot of minimal potential leaks and are simpler for one to install as well as maintain. It is having a minimized get together that is clarifying its decreased weight and sizes. The Manifold Valves have been planned with a temperature rating with operating parameters which range up to 232ºC with packing of PTFE and optional 428ºC with packing of graphite. The Manifold Valves are designed and made to withstand a pressure parameter rating of up to 6000 PSIG. Manifold valve is made available at a different sizes, design, flow pattern, end connections, temperature rating, connections, working pressure. Also the raw material picked up by us is procured from trusted market vendors which are then further quality tested by our skilled professionals. Their products are upgraded according to the customers demand and latest market trend.

Specifications:
  • Grade: P1/ P11/ P91
  • Size: 1/8-1"


Additional Information:

  • Packaging Details: Alloy Steel Manifold Valve are surface wash and clean to remove all impurities and stock in the warehouse. Then it is wrapped in thin plastic and also it ends are protected by plastic caps to avoid any damage in transit. Alloy Steel Manifold Valve is bundled in bubble wrap followed by assorting them in colored plastic bundles. An outer rope is tied to protect the tubing and they are packed in wooden box or container. M P Jain Provide Alloy Steel Manifold Valve with all necessary documents such as commercial invoice, packing list, Test Reports, HS Code, Country of Origin attested by the chamber of commerce, Fumigation Certificate, Warranty Letter, and Base Material Certificates. Every lot is supplied with a material test certificate as per EN 10204 NACE 3.1 standards indicating the chemical and mechanical properties of the Instrumentation Tubes. We also confirm the guarantee of the Alloy Steel Manifold Valve supplied as per Purchase order specifications and attest the same in the Material Test Certificate. We also welcome any third party inspection from an agency nominated by the customer to comply with NACE 3.2 Certification if required by the customer at an extra cost.
Get Best QuoteRequest A Callback
Carbon Steel Manifold Valves

Carbon Steel Manifold Valves

Product Price: Rs 200 / PieceGet Best Price

Product Details:
Usage/ApplicationMobile Machinery
Pressure6000 psig @ 100 Degree F (414 barg @ 38 Degree C).
Size1"
BrandMPJ
Temperature1200 Degree F
MaterialCarbon Steel
GradeA105

M P Jain Tubing Solutions offers a series of compact Manifold Valves for use with pressure and differential pressure instruments. Carbon Steel manifold valves is utilized in quantities of applications from the mobile machinery to the heavier industrials tools. The valves are having well-improved effectiveness and diminished expenses. It is intended for the liquid level, static pressure and furthermore extraordinary weight applications. The valves are having a lot of minimal potential leaks and are simpler for one to install as well as maintain. Carbon steel Manifold valve is made available at a different sizes, design, flow pattern, end connections, temperature rating, connections, working pressure.

 

Carbon Steel A105 Manifold Valves, Carbon Steel ASTM A105 2 Way Manifold Valve, ASTM A105 Instrument Manifold Valve, Carbon Steel A105 3 Way Manifold Valves, A105 Carbon Steel Manifold Valves, UNS K03504 Manifold Valve, Carbon Steel ASTM A105 Valve Manifold, Carbon Steel A105 5 Way Manifold Valves Manufacturers in Mumbai, India.


Carbon Steel Manifold Valve Chemical Properties:

Grade

C 

Si 

Mn 

P 

S 

Cr 

Carbon Steel A105

0.35

0.10-0.35

0.60-1.05

0.035

0.040

0.30

 

Carbon Steel A105 Direct-Mount Manifolds, Carbon Steel A105 Double Block Bleed Valves, Carbon Steel A105 Hydraulic Manifold, Carbon Steel A105 2 Valve Manifold, Carbon Steel A105 Valves Manifolds, Carbon A105 V/ VB and VL series Manifolds, Carbon Steel A105 Remote-Mount, Carbon Steel A105 3 Valve Manifold, A105 Carbon Steel Manifold Valves, Carbon Steel A105 Block and Bleed Valves, Carbon Steel A105 H Series Manifold Valves, Carbon Steel A105 Bellows Sealed Manifolds, Carbon Steel A105 Double Block Bleed Valves, Carbon Steel A105 Hydraulic Manifold, Carbon Steel A105 5 Valve Manifold, Carbon Steel A105 Three Way T- Type Manifold Valves, Carbon Steel A105 Instrumentation Manifold Valves, Carbon Steel ASTM A105 R - Type Manifold Valve A105 CS Remote-Mount Manifold Exporters, Supplier in Mumbai, India.




Additional Information:

  • Packaging Details: Carbon Steel Manifold Valve are surface wash and clean to remove all impurities and stock in the warehouse. Then it is wrapped in thin plastic and also it ends are protected by plastic caps to avoid any damage in transit. Carbon Steel Manifold Valve is bundled in bubble wrap followed by assorting them in colored plastic bundles. An outer rope is tied to protect the tubing and they are packed in wooden box or container. M P Jain Provide Carbon Steel Manifold Valve with all necessary documents such as commercial invoice, packing list, Test Reports, HS Code, Country of Origin attested by the chamber of commerce, Fumigation Certificate, Warranty Letter, and Base Material Certificates. Every lot is supplied with a material test certificate as per EN 10204 NACE 3.1 standards indicating the chemical and mechanical properties of the Instrumentation Tubes. We also confirm the guarantee of the Carbon Steel Manifold Valve supplied as per Purchase order specifications and attest the same in the Material Test Certificate. We also welcome any third party inspection from an agency nominated by the customer to comply with NACE 3.2 Certification if required by the customer at an extra cost.
Get Best QuoteRequest A Callback
Titanium Manifold Valves

Titanium Manifold Valves

Product Price: Rs 200 / PieceGet Best Price

Product Details:
Usage/ApplicationMarine
Pressure6000 psig @ 100 Degree F (414 barg @ 38 Degree C).
Size1"
BrandMPJ
TemperatureMax. 648 Degree C
MaterialTitanium
Country of OriginMade in India

M P Jain Tubing Solutions globally recognized as the proud manufacturer, supplier, and stockist that offers a variety of Titanium Manifold Valves. Titanium Manifold Valves are designed from titanium alloy that guarantees uncommon protection to corrosion and higher strength. Notwithstanding it comprise of other substance, for example, chromium, nickel, molybdenum and copper content also. The titanium valves are formidable in its resistance to corrosion by both chemical and water media. Besides, these valves retain durability and quality at raised temperatures. The valves are mainly non-magnetic but exhibit superior fatigue and fracture resistance. Also, these valves are strengthened by heat treatment and highlights weldability and machinability.

 

Titanium R - Type Manifold Valve, Titanium Hydraulic Manifold, Titanium Alloy Bellows Sealed Manifolds, Titanium Instrumentation Manifold Valves, Titanium 5 Valve Manifold, Titanium Valves Manifolds Titanium Alloy Three Way T- Type Manifold Valves, Titanium H Series Manifold Valves, Titanium Double Block Bleed Valves, Titanium Block and Bleed Valves, Titanium Alloy 3 Valve Manifold, Titanium Remote-Mount Exporters, Titanium 2 Valve Manifold, Titanium Direct-Mount Manifolds, Titanium Remote-Mount Manifold Valve Supplier in Mumbai, India.


Titanium Manifold Valve Equivalent grades:

STANDARD

UNS

WNR.

Titanium Gr 2

R50400

3.7035

Titanium Gr 5

R56400

3.7165

 

Titanium Manifold Valve Chemical Properties:

Grade

Ti

C

Fe

H

N

O

Ai

V

Titanium Gr 2

99.2 min

0.1 max

0.3 max

0.015 max

0.03 max

0.25 max

-

-

Titanium Gr 5

90 min

-

0.25 max

-

-

0.2 max

6 min

4 min



Additional Information:

  • Packaging Details: Titanium Manifold Valve are surface wash and clean to remove all impurities and stock in the warehouse. Then it is wrapped in thin plastic and also it ends are protected by plastic caps to avoid any damage in transit. Titanium Manifold Valve is bundled in bubble wrap followed by assorting them in colored plastic bundles. An outer rope is tied to protect the tubing and they are packed in wooden box or container. M P Jain Provide Titanium Manifold Valve with all necessary documents such as commercial invoice, packing list, Test Reports, HS Code, Country of Origin attested by the chamber of commerce, Fumigation Certificate, Warranty Letter, and Base Material Certificates. Every lot is supplied with a material test certificate as per EN 10204 NACE 3.1 standards indicating the chemical and mechanical properties of the Instrumentation Tubes. We also confirm the guarantee of the Titanium Manifold Valve supplied as per Purchase order specifications and attest the same in the Material Test Certificate. We also welcome any third party inspection from an agency nominated by the customer to comply with NACE 3.2 Certification if required by the customer at an extra cost.
Get Best QuoteRequest A Callback
Hastelloy Manifold Valve

Hastelloy Manifold Valve

Product Price: Rs 250 / PieceGet Best Price

Product Details:
Usage/ApplicationHeavy Industrial Instrumentality
Pressure6000 psig @ 100 Degree F (414 barg @ 38 Degree C).
Size1"
BrandMPJ
TypeHastelloy
TemperatureMax. 1200 Degree F(648 Degree C)
StandardASTM

M P Jain Tubing Solutions is one of the leading stockist, manufacturer, and exporter of the Hastelloy manifold valve. Manifold valves are the type of valves which are used to connect more than two valves together that are of dissimilar size and shape. Hastelloy is one such alloy of a type that is widely used by the industries in various tough situations.


Hastelloy Manifold Valve Equivalent Grade:

Standard

UNS

WERKSTOFF NR.

AFNOR

JIS

GOST

OR

EN

Hastelloy C276

N10276

2.4819

-

 

NW 0276

 

????65??????

????760

 

NiMo16Cr15W

 

Hastelloy C22

 

N06022

2.4602

-

 

NW 6022

-

-

 

NiCr21Mo14W

 

Hastelloy B2

 

N10665

 

2.4617

-

-

-

-

-


Hastelloy Manifold Valve Chemical Properties:

Standard 

C 

Mn 

Si 

S 

Co 

Ni 

Cr 

Fe 

Mo 

P 

 

Hastelloy C22

0.010 max

0.50 max

0.08 max

0.02 max

2.50 max

50.015 min*

20.00 – 22.50

2.00 – 6.00

12.50 – 14.50

0.02 max

Hastelloy C276

0.010 max

1.00 max

0.08 max

0.03 max

2.50 max

50.99 min*

14.50 – 16.50

4.00 – 7.00

15.00 – 17.00

0.04 max



Additional Information:

  • Packaging Details: Hastelloy Manifold Valve are surface wash and clean to remove all impurities and stock in the warehouse. Then it is wrapped in thin plastic and also it ends are protected by plastic caps to avoid any damage in transit. Hastelloy Manifold Valve is bundled in bubble wrap followed by assorting them in colored plastic bundles. An outer rope is tied to protect the tubing and they are packed in wooden box or container. M P Jain Provide Hastelloy Manifold Valve with all necessary documents such as commercial invoice, packing list, Test Reports, HS Code, Country of Origin attested by the chamber of commerce, Fumigation Certificate, Warranty Letter, and Base Material Certificates. Every lot is supplied with a material test certificate as per EN 10204 NACE 3.1 standards indicating the chemical and mechanical properties of the Instrumentation Tubes. We also confirm the guarantee of the Hastelloy Manifold Valve supplied as per Purchase order specifications and attest the same in the Material Test Certificate. We also welcome any third party inspection from an agency nominated by the customer to comply with NACE 3.2 Certification if required by the customer at an extra cost.
Get Best QuoteRequest A Callback
Inconel Manifold Valves

Inconel Manifold Valves

Product Price: Rs 160 / PieceGet Best Price

Product Details:
Body MaterialInconel
Usage/ApplicationMobile Machinery
Pressure6000 psig @ 100 Degree F (414 barg @ 38 Degree C).
Size1"
BrandMPJ
TemperatureMax. 1200 Degree F(648 Degree C)
Country of OriginMade in India

M P Jain Tubing Solutions are leading on the top for being one of the best manufacturer and exporter of the very good quality of Inconel manifold valves. Alloy Inconel manifold valve is oxidation-corrosion resistant alloy that is suited for the services at the high-temperature atmosphere that is subjected to heat and pressure. When it is heated, it forms stable, thicker and passivating oxide layer for protecting the surface from more attack. The testing of the designed ranges of Inconel manifold valves at the production unit is very much essential in order to assure all about product quality.

 

Inconel H Series Manifold Valves, Inconel Hydraulic Manifold, Inconel R - Type Manifold Valve, Inconel Alloy Bellows Sealed Manifolds, Inconel Valves Manifolds, Inconel Double Block Bleed Valves, Inconel Alloy Three Way T- Type Manifold Valves, Inconel Block and Bleed Valves, Inconel Instrumentation Manifold Valves, Inconel Remote-Mount, Inconel Direct-Mount Manifolds Exporters, Inconel 2 Valve Manifold, Inconel Alloy 3 Valve Manifold, Inconel Remote-Mount Manifold Valve, Inconel 5 Valve Manifold Supplier in Mumbai, India.

 

Inconel Manifold Valves Equivalent Grades:

STANDARD

UNS

WNR.

AFNOR

EN

JIS

BS

GOST

OR

Inconel 600

N06600

2.4816

NC15FE11M

NiCr15Fe

NCF 600

NA 13

?????????? 28-2,5-1,5

????868

Inconel 601

N06601

2.4851

NC23FeA

NiCr23Fe

NCF 601

NA 49

XH60BT

-

Inconel 625

N06625

2.4856

NC22DNB4M

NiCr22Mo9Nb

NCF 625

NA 21

????75????????

-

 

Inconel Manifold Valves Chemical Properties:

Grade

C

Mn

Si

S

Cu

Fe

Ni

Cr

Inconel 600

0.15 max

1.00 max

0.50 max

0.015 max

0.50 max

6.00 – 10.00

72.00 min

14.00 – 17.00

Inconel 601

0.10 max

1.00 max

0.50 max

0.015 max

1.00 max

Balance

58.0 – 63.0

21.0 – 25.0

Inconel 625

0.10 max

0.50 max

0.50 max

0.015 max

1.00 max

5.0 max

58.0 min

20.0 - 23.0



Additional Information:

  • Packaging Details: Inconel Manifold Valve are surface wash and clean to remove all impurities and stock in the warehouse. Then it is wrapped in thin plastic and also it ends are protected by plastic caps to avoid any damage in transit. Inconel Manifold Valve is bundled in bubble wrap followed by assorting them in colored plastic bundles. An outer rope is tied to protect the tubing and they are packed in wooden box or container. M P Jain Provide Inconel Manifold Valve with all necessary documents such as commercial invoice, packing list, Test Reports, HS Code, Country of Origin attested by the chamber of commerce, Fumigation Certificate, Warranty Letter, and Base Material Certificates. Every lot is supplied with a material test certificate as per EN 10204 NACE 3.1 standards indicating the chemical and mechanical properties of the Instrumentation Tubes. We also confirm the guarantee of the Inconel Manifold Valve supplied as per Purchase order specifications and attest the same in the Material Test Certificate. We also welcome any third party inspection from an agency nominated by the customer to comply with NACE 3.2 Certification if required by the customer at an extra cost.
Get Best QuoteRequest A Callback
Monel Alloy Manifold Valve

Monel Alloy Manifold Valve

Product Price: Rs 185 / PieceGet Best Price

Product Details:
Size1"
BrandMPJ
Material GradeK500
TemperatureMax. 1200 Degree F
Working Pressure6000 psig (413 bar)
MaterialMonel Alloy
UsagePipes for Engineering purpose

As an ISO certified company, M P Jain Tubing Solutions offer a comprehensive range of Monel Manifold Valves to the clients. Using highest quality of raw material, we strictly check the quality of the product through its national & international quality standards. Also, we keep on upgrading the quality of the product as per the demands made by the clients and latest market trend. Monel Manifold Valves are appreciated for its thermal stability and workability in most severe and critical environments. Monel manifold valves are manufactured utilizing the tested and qualified crude materials. Moreover, using the trending machines and equipment production is done with precise dimensions as per the set industrial norms.

 

Monel Alloy 400 2 Way Manifold Valve Manufacturers, Monel 400 3-Way Manifold Valves, Monel Alloy 400 Valve Manifold, Monel 400 5 Way Manifold Valves Suppliers, DIN 2.4360 Manifold Valve, UNS N04400 Manifold Valves, Monel 400 Instrument Manifold Valves Manufacturers in Mumbai, India, UNS N05500 Manifold Valves, Monel K-500 3 Way Manifold Valves, Monel K500 Instrument Manifold Valves, Monel Alloy K500 Valve Manifold, DIN 2.4375 Manifold Valve in, Alloy K500 2 Way Manifold Valve Manufacturers, Monel K500 5 Way Manifold Valves Suppliers in Mumbai, India.

 

Monel Manifold Valves Equivalent Standard Grade:

STANDARD

UNS

WNR.

AFNOR

EN

JIS

BS

GOST

Monel 400

N04400

2.4360

NU-30M

NiCu30Fe

NW 4400

NA 13

?????????? 28-2,5-1,5

Monel K500

N05500

2.4375

NU-30M

NiCu30Fe

NW 4400

NA 13

?????????? 28-2,5-1,5

 

Monel Manifold Valves Chemical Composition:

Grade

Ni

C

Al

Mn

Si

Fe

Cu

S

Monel 400

63.0 min

0.3 max

0.50 max

2.0 max

0.5 max

1.0 – 2.5

28.0 – 34.0

0.02 max

Monel K500

63..00 min

0.25 max

-

1.5 max

0.5 max

0.5 - 2

27.00- 33.00

0.010 max



Additional Information:

  • Packaging Details: Monel Manifold Valve are surface wash and clean to remove all impurities and stock in the warehouse. Then it is wrapped in thin plastic and also it ends are protected by plastic caps to avoid any damage in transit. Monel Manifold Valve is bundled in bubble wrap followed by assorting them in colored plastic bundles. An outer rope is tied to protect the tubing and they are packed in wooden box or container. M P Jain Provide Monel Manifold Valve with all necessary documents such as commercial invoice, packing list, Test Reports, HS Code, Country of Origin attested by the chamber of commerce, Fumigation Certificate, Warranty Letter, and Base Material Certificates. Every lot is supplied with a material test certificate as per EN 10204 NACE 3.1 standards indicating the chemical and mechanical properties of the Instrumentation Tubes. We also confirm the guarantee of the Monel Manifold Valve supplied as per Purchase order specifications and attest the same in the Material Test Certificate. We also welcome any third party inspection from an agency nominated by the customer to comply with NACE 3.2 Certification if required by the customer at an extra cost.
Get Best QuoteRequest A Callback
Nickel Alloy Manifold Valves

Nickel Alloy Manifold Valves

Product Price: Rs 170 / PieceGet Best Price

Product Details:
Usage/ApplicationFood and Dairy
Pressure6000 psig @ 100 Degree F (414 barg @ 38 Degree C).
Size1"
BrandMPJ
Material GradeAlloy 201
Temperature1200 Degree F(648 Degree C)
MaterialNickel Alloy

M P Jain Tubing Solutions is the leading Stockist, supplier, manufacturer, and exporter of the superior quality of comprehensive ranges of Nickel manifold valves. These are made available to the national and international customers at various specifications, standards, types, sizes, etc. Valves are the important components of a liquid-based industrial system. From controlling the liquid flow to the pressure regulations, these valves do several functions. According to the usage, these valves are available in a different configuration. Nickel manifold valves are the equipment that is connecting two or more valves of the hydraulic system. Ranges of isolated valves can be together combined into the single body configurations. Each valve is having a separate opening that is used for connecting the pipes. The valve chamber is common. These valves are commonly including needles, balls, etc. Their uses result in saving in terms of installation costs and space. 

Nickel Hydraulic Manifold, Nickel Alloy Three Way T- Type Manifold Valves, Nickel Double Block Bleed Valves, Nickel R - Type Manifold Valve, Nickel Instrumentation Manifold Valves, Nickel Block and Bleed Valves, Nickel H Series Manifold Valves, Nickel Alloy Bellows Sealed Manifolds, Nickel Valves Manifolds, Nickel 2 Valve Manifold,  Nickel 5 Valve Manifold, Nickel Remote-Mount, Nickel Direct-Mount Manifolds, Nickel Alloy 3 Valve Manifold Supplier in Mumbai, India.


Nickel 201 Manifold Valves Equivalent Standard Grade:

STANDARD

WERKSTOFF NR.

UNS

JIS

BS

GOST

AFNOR

EN

Nickel 201

2.4068

N02201

NW 2201

NA 12

????-2

LC-Ni 99


Nickel Alloy 201 Manifold Valves Chemical Composition:

Grade

C

Mn

Si

S

Cu

Fe

Ni

Nickel 201

0.02 max

0.35 max

0.35 max

0.01 max

0.25 max

0.40 max

99.0 min


Nickel Alloy 201 Manifold Valves Mechanical Properties:

Element

Density

Melting Point

Tensile Strength

Yield Strength (0.2%Offset)

Elongation

Nickel 201

8.9 g/cm3

1446 °C (2635 °F)

Psi – 67000 ,

     MPa – 462

Psi – 21500 ,

       MPa – 148

45 %



Additional Information:

  • Packaging Details: Nickel Alloy Manifold Valve are surface wash and clean to remove all impurities and stock in the warehouse. Then it is wrapped in thin plastic and also it ends are protected by plastic caps to avoid any damage in transit. Nickel Alloy Manifold Valve is bundled in bubble wrap followed by assorting them in colored plastic bundles. An outer rope is tied to protect the tubing and they are packed in wooden box or container. M P Jain Provide Nickel Alloy Manifold Valve with all necessary documents such as commercial invoice, packing list, Test Reports, HS Code, Country of Origin attested by the chamber of commerce, Fumigation Certificate, Warranty Letter, and Base Material Certificates. Every lot is supplied with a material test certificate as per EN 10204 NACE 3.1 standards indicating the chemical and mechanical properties of the Instrumentation Tubes. We also confirm the guarantee of the Nickel Alloy Manifold Valve supplied as per Purchase order specifications and attest the same in the Material Test Certificate. We also welcome any third party inspection from an agency nominated by the customer to comply with NACE 3.2 Certification if required by the customer at an extra cost.
Get Best QuoteRequest A Callback
Duplex Steel Manifold Valve

Duplex Steel Manifold Valve

Product Price: Rs 260 / pcsGet Best Price

Product Details:
Usage/ApplicationAutomobile Industry
PressureMedium Pressure
SizeDN200
BrandMPJ
MaterialDuplex Steel
Material GradeUNS S31803
Working Pressure3000 psig (206 bar)

M P Jain Tubing Solutions is a leading stockist, manufacturers and exporter of Duplex Steel UNS S31803 manifold Valves, valves having a microstructure of 50% austenitic and 50% ferritic nature, a benefit that helps them to surf the wave in numerous industries. 2205 is one of the generally utilized duplex steel grades. Today it has discovered numerous applications due to its high tensile strength and very good corrosion resistant feature. The composition of standards duplex S31803 is refined by the steel suppliers and that has resulted in the restricted composition as UNS S32205 was endorsed. Duplex S32205 provides very good corrosion resistance ability but for Duplex S31803 that is currently developed is also complying with S32205. However, S32205 isn't ideal for use at the high temperature over 300 Deg C since it is experiencing the precipitation of weak little constituents and not beneath - 50 Deg C due to ductile to brittle transitions.

 

Duplex Steel UNS S31803 / UNS S32205 Instrumentation Valves, Duplex Steel Ball Valve, Duplex Steel Check Valve,  ASTM A815 Duplex Steel werkstoff nr. 1.4462 Duplex Steel Gate Valve, Duplex Steel Double Block & Bleed Valve, Duplex Steel Gauge Valve, Duplex Steel Mono Flange Valve, Duplex Steel manifold Valve, Duplex Steel Needle Valve manufacturer & suppliers, exporters.


Size:

  • 1/2" to 4" (DN25-DN200)

 

 
Duplex Steel Uns S31803 Valves Grade Equivalents: 

STANDARD

UNS

WERKSTOFF NR.

Duplex S32205 

S32205

1.4462


Duplex Steel Uns S31803 – Uns S32205 Valves: 

UNS

DUPLEX INDUSTRY SPECIFICATIONS

CHEMICAL COMPOSITION

MIN.TENSILE (KSI)

MIN.YIELD
(KSI)

ELONGATION
%

UNS S31803

ASME SA-182 (F51), SA-240, SA-798, SA-790, SA-815
ASTM A182 (F51),A240, A276, A479, A789, A790, A815, A928, 
A988
SAE J405

C 0.30 max 

Cr 21.0-23.0
Mn 2.00 max
Mo 
2.50-3.50
N 0.08-0.20
Ni 4.50-6.50
P 0.030 max
S 0.020 max
Si 
1.00 max

90

65

25

UNS S32205

ASME SA-182 (F60), SA-240, SA-798, SA-790, SA-815
ASTM A182 (F60), A240, A276, A479, A480, A798, A790, 
A815, A928, A988
SAE J405

C 0.30 max
Cr 22.0-23.0
Mn 
2.00 max
Mo 3.00-3.50
N 0.14-0.20 
Ni 4.50-6.50
P 0.030 max

0.020 max Si1.00 max

 95

65

25




Additional Information:

  • Packaging Details: Duplex Steel Manifold Valve are surface wash and clean to remove all impurities and stock in the warehouse. Then it is wrapped in thin plastic and also it ends are protected by plastic caps to avoid any damage in transit. Duplex Steel Manifold Valve is bundled in bubble wrap followed by assorting them in colored plastic bundles. An outer rope is tied to protect the tubing and they are packed in wooden box or container. M P Jain Provide Duplex Steel Manifold Valve with all necessary documents such as commercial invoice, packing list, Test Reports, HS Code, Country of Origin attested by the chamber of commerce, Fumigation Certificate, Warranty Letter, and Base Material Certificates. Every lot is supplied with a material test certificate as per EN 10204 NACE 3.1 standards indicating the chemical and mechanical properties of the Instrumentation Tubes. We also confirm the guarantee of the Duplex Steel Manifold Valve supplied as per Purchase order specifications and attest the same in the Material Test Certificate. We also welcome any third party inspection from an agency nominated by the customer to comply with NACE 3.2 Certification if required by the customer at an extra cost.
Get Best QuoteRequest A Callback
Nickel Alloys Needle Valves

Nickel Alloys Needle Valves

Product Price: Rs 300 / PCSGet Best Price

Product Details:
Structure TypeNeedle
Size2"
BrandMPJ
DesignIntegral Bonnet Design
Material GradeNickel 200
TemperatureMax. 343 Degree C
MaterialNickel Alloy
Country of OriginMade in India

M P Jain Tubing Solutions is a known stockist and seller of Nickel Alloys Needle Valves. Nickel Alloy 200 Needle Valves is an austenitic stainless steel developed for use in high temperature corrosion resistant applications. Because of its high chromium and moderate nickel content, these Valves is resistant to sulfidation and can also be used in moderately carburizing atmospheres. Nickel Alloy 201 Needle Valves have some excellent corrosion resistance in a variety of different media.


Nickel Needle & Gauge Valves Equivalent Standard Grade:

STANDARD

WERKSTOFF NR.

UNS

JIS

GOST

EN

OR

Nickel Alloy 200

2.4066

N02200

NW 2200

????65??????

NiMo16Cr15W

????760

Nickel Alloy 201

2.4068

N02201

NW 2201

????-2

LC-Ni 99


Nickel Needle & Gauge Valve Chemical Composition:

Grade

C

Mn

Si

S

Cu

Fe

Ni

Nickel 200

0.15 max

0.35 max

0.35 max

0.01 max

0.25 max

0.40 max

99.0 min

Nickel 201

0.02 max

0.35 max

0.35 max

0.01 max

0.25 max

0.40 max

99.0 min


Nickel Alloy Needle Valve Mechanical Properties:

Element

Density

Melting Point

Tensile Strength

Yield Strength (0.2%Offset)

Elongation

Nickel 200

8.9 g/cm3

1446 °C (2635 °F)

Psi – 67000 , MPa – 462

Psi – 21500 , MPa – 148

45 %

Nickel 201

8.9 g/cm3

1446 °C (2635 °F)

Psi – 67000 , MPa – 462

Psi – 21500 , MPa – 148

45 %



Additional Information:

  • Packaging Details: Nickel Alloys Needle Valves are surface wash and clean to remove all impurities and stock in the warehouse. Then it is wrapped in thin plastic and also it ends are protected by plastic caps to avoid any damage in transit. Nickel Alloys Needle Valves is bundled in bubble wrap followed by assorting them in colored plastic bundles. An outer rope is tied to protect the tubing and they are packed in wooden box or container. M P Jain Provide Nickel Alloys Needle Valves with all necessary documents such as commercial invoice, packing list, Test Reports, HS Code, Country of Origin attested by the chamber of commerce, Fumigation Certificate, Warranty Letter, and Base Material Certificates. Every lot is supplied with a material test certificate as per EN 10204 NACE 3.1 standards indicating the chemical and mechanical properties of the Instrumentation Tubes. We also confirm the guarantee of the Nickel Alloys Needle Valves supplied as per Purchase order specifications and attest the same in the Material Test Certificate. We also welcome any third party inspection from an agency nominated by the customer to comply with NACE 3.2 Certification if required by the customer at an extra cost.
Get Best QuoteRequest A Callback
Duplex Steel Needle Valves

Duplex Steel Needle Valves

Product Price: Rs 250 / UnitGet Best Price

Product Details:
Size50 mm Max
MaterialDuplex Steel
Pressure6000 Psig (413 Bar)
TemperatureMax. 650 Degree F (343 Degree C)
ThreadThreaded NPT
Country of OriginMade in India
Material GradeS31803

M P Jain Tubing Solutions is a known Manufacturer and exporter of Duplex Steel Needle Valves, which can be offered in made to order length sizes and shapes, dimensions. Austenitic stainless steels like Duplex Steel S31803 Bar Stock Needle & Gauge Valve are widely available, have good general corrosion resistance, good cryogenic toughness, and excellent formability and weldability. These Duplex Steel S32205 High Pressure Needle & Gauge Valve offers improved weldability and also reduces the possibility of lower corrosion resistance around welded areas.

 

DIN 1.4462 Needle Valve, Duplex 2205 Hex Needle Valves, Duplex Steel S31803 Miniature Needle Valve Stockist, Grade S32205 Duplex Union Bonnet High Pressure Female X-Female NPT, Duplex Steel Needle Valve, Duplex Steel Forged Needle Valve Dealer, Duplex Steel S31803 Panel Mount Needle Valve, Duplex Stainless Steel Integral Bonnet Needle Valves, Duplex Steel S32205 Needle Valve Exporter in India.

 

Duplex Steel Needle/Gauge Valves Equivalent Standard Grade:

STANDARD

WERKSTOFF NR.

UNS

Duplex 2205

1.4462

S31803 / S32205

 

Duplex Steel Needle & Gauge Valve Chemical Composition:

Grad

C

Mn

Si

P

S

Cr

Mo

Ni

N

Fe

S31803

0.030 max

2.00 max

1.00 max

0.030 max

0.020 max

22.0 23.0

3.0 3.5

4.50 6.50

0.14 0.20

63.72 min

S32205

0.030 max

2.00 max

1.00 max

0.030 max

0.020 max

21.0 23.0

2.50 3.50

4.50 6.50

0.8 0.20

63.54 min

 

Duplex Steel Needle Valve Mechanical Properties:

Grades

Density (g/cm 3)

Density (lb/in 3)

Melting Point (°C)

Melting Point (°F)

S31803 / S32205

7.805

0.285

1420 1465

2588 2669



Additional Information:

  • Packaging Details: Duplex Steel Needle Valves are surface wash and clean to remove all impurities and stock in the warehouse. Then it is wrapped in thin plastic and also it ends are protected by plastic caps to avoid any damage in transit. Duplex Steel Needle Valves is bundled in bubble wrap followed by assorting them in colored plastic bundles. An outer rope is tied to protect the tubing and they are packed in wooden box or container. M P Jain Provide Duplex Steel Needle Valves with all necessary documents such as commercial invoice, packing list, Test Reports, HS Code, Country of Origin attested by the chamber of commerce, Fumigation Certificate, Warranty Letter, and Base Material Certificates. Every lot is supplied with a material test certificate as per EN 10204 NACE 3.1 standards indicating the chemical and mechanical properties of the Instrumentation Tubes. We also confirm the guarantee of the Duplex Steel Needle Valves supplied as per Purchase order specifications and attest the same in the Material Test Certificate. We also welcome any third party inspection from an agency nominated by the customer to comply with NACE 3.2 Certification if required by the customer at an extra cost.
Get Best QuoteRequest A Callback
SS304 Needle Valve

SS304 Needle Valve

Product Price: Rs 150 / PieceGet Best Price

Product Details:
Usage/ApplicationBeverages
Structure TypeNeedle
End Connection TypeNPT
BrandMPJ
MediaOil
ColorSilver
MaterialStainless Steel
Size2"
Country of OriginMade in India
Material GradeSS304

M P Jain Tubing Solutions is one of the largest manufacturer, stockist, and supplier of SS304 Needle Valve. These valve are used in equipment that control the temperature of water within a specific system. This kind of valve is generally used in carburettors to maintain the ideal fuel flow. It may even be utilized in vacuum systems when a definite management of gas flow is needed. We are engaged in catering the needs of the customer and achieving the desired goal along with that. We established in long years back that are engaged in manufacturing, exporting and supplying high quality Stainless Steel Needle & Gauge Valves to our buyers across the world. Some of the unique features offered are sleek design; high end finishing, accurate dimensions, great performance, and timely delivery of the goods are some of the features. The Needle and Gauge valves are offered in customized shape, size and thickness as per the necessity of the customers. The other good chemical elements present in the grade such as nickel, titanium and copper helps the alloy to easily withstand in extreme conditions. Hence, the industry uses Stainless Steel Needle & Gauge Valves. Needle valves are primarily fabricated to offer a reliable method to be used in isolated instrumentation for throttling and shutting off the requirements. These needle valves come in either soft seated or hard seated models. Talking about the Gauge valves, they are primarily used in order to isolate the process. These types of valves are basically used in conjunction having block and bleed valves in it. The Gauge valves are made available with dissimilar extended length between the inlet and the centerline bonnet.

 

SS Gauge Valve, SS Forged Body Gauge Valve, Stainless Steel Hydraulic Needle Valve, SS Gauge Vent Valves Exporters, SS Screwed End Needle Valve, Stainless Steel Parker Needle Valve, Stainless Steel Needle and Gauge Valves, SS Autoclave Needle Valve, Stainless Steel Needle Valve, Austenitic Stainless Steel Needle / Gauge Valves, SS Integral Bonnet Needle Valve, Stainless Steel Multiport Gauge Valves Supplier in Mumbai, India.



Additional Information:

  • Packaging Details: Stainless Steel 304 Needle Valves are surface wash and clean to remove all impurities and stock in the warehouse. Then it is wrapped in thin plastic and also it ends are protected by plastic caps to avoid any damage in transit. Stainless Steel 304 Needle Valves is bundled in bubble wrap followed by assorting them in colored plastic bundles. An outer rope is tied to protect the tubing and they are packed in wooden box or container. M P Jain Provide Stainless Steel 304 Needle Valves with all necessary documents such as commercial invoice, packing list, Test Reports, HS Code, Country of Origin attested by the chamber of commerce, Fumigation Certificate, Warranty Letter, and Base Material Certificates. Every lot is supplied with a material test certificate as per EN 10204 NACE 3.1 standards indicating the chemical and mechanical properties of the Instrumentation Tubes. We also confirm the guarantee of the Stainless Steel 304 Needle Valves supplied as per Purchase order specifications and attest the same in the Material Test Certificate. We also welcome any third party inspection from an agency nominated by the customer to comply with NACE 3.2 Certification if required by the customer at an extra cost.
Get Best QuoteRequest A Callback
Inconel Needle Valve

Inconel Needle Valve

Product Price: Rs 300 / PieceGet Best Price

Product Details:
Structure TypeNeedle
Size2"
BrandMPJ
MaterialInconel
TemperatureMax. 650 Degree F
Thread SizeCompression Fittings
Maximum Working Pressure6000 Psig (413 Bar)

M P Jain Tubing Solutions is the leading manufacturer, supplier, and exporter of Inconel Needle & Gauge Valves. It is a standard alloy for purposes that require higher resistance to corrosion and abrasion. The Inconel has excellent physical and mechanical constants and also has desired workability and durability. The presence of higher nickel content makes withstand in many organic and inorganic compounds containing environments. It has good immunity to work in chloride ion and stress corrosion cracking. It has the chromium content that improves resistance to oxidizing and reducing environments. Inconel is not a precipitation hardenable. However, the cold working operation is used for hardening and to acquire elevated strength.

 

Inconel Alloy Gauge Vent Valves, Inconel Multiport Gauge Valves Inconel Needle Valve, Inconel Screwed End Needle Valve, Inconel Alloy Parker Needle Valve, Inconel Hydraulic Needle Valve, Inconel Alloy Gauge Valve, Inconel Forged Body Gauge Valve, Inconel  Alloy Integral Bonnet Needle Valve, Inconel Needle / Gauge Valves, Incoloy Alloy Autoclave Needle Valve, Inconel Needle and Gauge Valves Supplier in Mumbai, India.

 

Inconel Alloy 600 Needle/Gauge Valves Equivalent Standard Grade:

STANDARD

UNS

WNR.

AFNOR

EN

JIS

BS

GOST

OR

Inconel 600

N06600

2.4816

NC15FE11M

NiCr15Fe

NCF 600

NA 13

28 2,5 1,5

868

 

Inconel 600 Needle & Gauge Valve Chemical Composition:

Grade

C

Mn

Si

S

Cu

Fe

Ni

Cr

Inconel 600

0.15 max

1.00 max

0.50 max

0.015 max

0.50 max

6.00 10.00

72.00 min

14.00 17.00

 

Inconel 600 Needle Valve Mechanical Properties:

Density

Melting Point

Tensile Strength

Yield Strength (0.2%Offset)

Elongation

8.47 g/cm3

1413 C (2580 F)

655 MPa, 95000 psi

310 MPa, 45000 psi

45 



Additional Information:

  • Packaging Details: Inconel Needle Valves are surface wash and clean to remove all impurities and stock in the warehouse. Then it is wrapped in thin plastic and also it ends are protected by plastic caps to avoid any damage in transit. Inconel Needle Valves is bundled in bubble wrap followed by assorting them in colored plastic bundles. An outer rope is tied to protect the tubing and they are packed in wooden box or container. M P Jain Provide Inconel Needle Valves with all necessary documents such as commercial invoice, packing list, Test Reports, HS Code, Country of Origin attested by the chamber of commerce, Fumigation Certificate, Warranty Letter, and Base Material Certificates. Every lot is supplied with a material test certificate as per EN 10204 NACE 3.1 standards indicating the chemical and mechanical properties of the Instrumentation Tubes. We also confirm the guarantee of the Inconel Needle Valves supplied as per Purchase order specifications and attest the same in the Material Test Certificate. We also welcome any third party inspection from an agency nominated by the customer to comply with NACE 3.2 Certification if required by the customer at an extra cost.
Get Best QuoteRequest A Callback
Hastelloy Needle Valve

Hastelloy Needle Valve

Product Price: Rs 450 / UnitGet Best Price

Product Details:
Size2" Max
BrandM P Jain
DesignIntegral Bonnet Design
Temperature343 Degree C
MaterialHastelloy
Maximum Working Pressure6000 Psig (413 Bar)
ThreadButt Weld

M P Jain Tubing Solutions is a well-known for being a reliable and trustworthy dealer that is globally dealing as the manufacturer and exporter of the high quality of Hastelloy Needle & Gauge valves. These are fabricated by using the superior quality of machinery and advanced technology that assures high quality of product creation so that it can be used at a high-temperature atmosphere. We offer these Hastelloy Needle Valve in different sizes and shapes that are being designed as per the national and international standard quality of raw materials. 

 

UNS N10276 Needle Valves, Hastelloy C276 Bar Stock Needle Valve, Hastelloy C276 Needle & Gauge Valve, Hastelloy Alloy C276 Instrumentation Needle Valve, Hastelloy C276 Union Bonnet Needle Valves, Hastelloy C-276 High Pressure Needle Valve, Hastelloy C276 Screwed Bonnet Valve Exporter, C276 Hastelloy Angle Needle Valve, Hastelloy C276 Mini Needle Valve Supplier in Mumbai, India.

 

Hastelloy Alloy Needle & Gauge Valves Equivalent Standard Grade:

STANDARD

UNS

WNR.

AFNOR

EN

JIS

OR

GOST

Hastelloy C276

N10276

2.4819

 

NiMo16Cr15W

NW 0276

760

65

 

Hastelloy C-276 Needle & Gauge Valve Chemical Composition:

Grade

Ni

C

Mo

Mn

Si

Fe

P

S

Co

Cr

W

V

Hastelloy C276

Balance

0.01 max

15 17

1.0 max

0.08 max

4 7

0.04 max

0.03 max

2.5 max

14.5 16.5

3 4.5

0.35 max

 

Hastelloy C276 Needle Valve Mechanical Properties:

Grade

Density

Melting Point

Tensile Strength

Yield Strength (0.2%Offset)

Elongation

Hastelloy C276

8.89 g/cm3

1370 C (2500 F)

Psi  1,15,000 , MPa 790

Psi  52,000 , MPa 355

40 



Additional Information:

  • Packaging Details: Hastelloy Needle Valves are surface wash and clean to remove all impurities and stock in the warehouse. Then it is wrapped in thin plastic and also it ends are protected by plastic caps to avoid any damage in transit. Hastelloy Needle Valves is bundled in bubble wrap followed by assorting them in colored plastic bundles. An outer rope is tied to protect the tubing and they are packed in wooden box or container. M P Jain Provide Hastelloy Needle Valves with all necessary documents such as commercial invoice, packing list, Test Reports, HS Code, Country of Origin attested by the chamber of commerce, Fumigation Certificate, Warranty Letter, and Base Material Certificates. Every lot is supplied with a material test certificate as per EN 10204 NACE 3.1 standards indicating the chemical and mechanical properties of the Instrumentation Tubes. We also confirm the guarantee of the Hastelloy Needle Valves supplied as per Purchase order specifications and attest the same in the Material Test Certificate. We also welcome any third party inspection from an agency nominated by the customer to comply with NACE 3.2 Certification if required by the customer at an extra cost.
Get Best QuoteRequest A Callback
Carbon Steel Needle Valve

Carbon Steel Needle Valve

Product Price: Rs 100 / PieceGet Best Price

Product Details:
Size1"
Usage/ApplicationIndustrial
TemperaturePtfe 450 Degree F, (232 Degree C) / Grafoil 700 Degree F (371 Degree C)
MaterialCarbon Steel
Working Pressure6000 Psig
DesignForged Body With Inline

Carbon steel is the metal alloy that is combining two elements like carbon and iron. Different components are additionally present yet in little amount so as to influence the properties. The other elements that are there in the plain carbon steel are copper, manganese, silicon. Steel with low carbon content is having comparable properties that are there in iron. With more carbon, this metal has increased more prominent hardness and strength and thus becomes less ductile and difficult to weld. The high carbon content allows steel to lower the melting point and is temperature resistant. The carbon steel is known for its raised quality.

 

Carbon Steel Needle & Gauge Valves, Carbon Steel Gauge Vent Valves, Carbon Gauge Bleed Needle Valves, Carbon Steel Gauge Valves, Carbon Steel Integral Bonnet Needle Valve, Carbon Parker Needle Valve, Carbon Steel Screwed End Needle Valve, Carbon Steel Gauge Valve, Carbon Needle Valve, Carbon Gauge and Needle Valves, Carbon Steel Hydraulic Needle Valve, Carbon Multiport Gauge Valves Carbon Forged Body Gauge Valve, Carbon Autoclave Needle Valve, Carbon Steel Industrial Needle & Gauge Valve Manufacturers in Mumbai, India.

 

Carbon Steel Needle & Gauge Valves chemical composition:

Grade

C

Mn

Ph

Su

Si

Co

Ni

Ch

Mo

V

ASTM A105

0.35 max

0.60-1.05

0.035 max

0.040 max

0.10-0.35

0.40 max

0.40 max

0.30 max

0.12 max

0.08 max

ASTM A105N

0.35 max

0.60-1.05

0.035 max

0.040 max

0.10-0.35

0.40 max

0.40 max

0.30 max

0.12 max

0.08 max



Additional Information:

  • Packaging Details: Carbon Steel Needle Valves are surface wash and clean to remove all impurities and stock in the warehouse. Then it is wrapped in thin plastic and also it ends are protected by plastic caps to avoid any damage in transit. Carbon Steel Needle Valves is bundled in bubble wrap followed by assorting them in colored plastic bundles. An outer rope is tied to protect the tubing and they are packed in wooden box or container. M P Jain Provide Carbon Steel Needle Valves with all necessary documents such as commercial invoice, packing list, Test Reports, HS Code, Country of Origin attested by the chamber of commerce, Fumigation Certificate, Warranty Letter, and Base Material Certificates. Every lot is supplied with a material test certificate as per EN 10204 NACE 3.1 standards indicating the chemical and mechanical properties of the Instrumentation Tubes. We also confirm the guarantee of the Carbon Steel Needle Valves supplied as per Purchase order specifications and attest the same in the Material Test Certificate. We also welcome any third party inspection from an agency nominated by the customer to comply with NACE 3.2 Certification if required by the customer at an extra cost.
Get Best QuoteRequest A Callback
Titanium Needle Valve

Titanium Needle Valve

Product Price: Rs 200 / PieceGet Best Price

Product Details:
Size2" Max
Pressure6000 psig (413 bar)
TemperatureMax. 343 Degree C
ThreadBSPP
MaterialTitanium
Country of OriginMade in India

m p jain tubing solution is a known supplier and manufacturer of Titanium Needle Valve, which offers some excellent corrosion resistance, as well as elevated hardness and strength. Titanium needle valves are the basic and general function of martensitic steel, which are being used for extremely stressed components.  titanium alloy needle & gauge valves are relatively low-density alloy valves ideal for heavy duty engineering works. Titanium has a low modulus of elasticity. Moreover, it has a higher phase structure point and down thermal expansion. Even more, titanium alloy has a non-magnetic structure. In terms of high tensile applications, it opposes high intrinsic shocks.

 

titanium high pressure needle valve, titanium alloy gr 2 instrumentation needle valve, titanium gr 2 bar stock needle valve, gr 2 titanium angle needle valve, uns r50400 needle valves exporter, titanium gr 2 screwed bonnet valve, titanium gr 2 mini needle valve, titanium needle & gauge valve, titanium gr 2 union bonnet needle valves,  supplier in mumbai, india.

 

Titanium needle & gauge valves equivalent standard grade:

standard

werkstoff nr.

uns

titanium gr. 2

3. 7035

r50400


Titanium needle & gauge valve chemical composition:

grade

ti

c

fe

h

n

o

al

v

ti grade2

99. 2 min

0. 1 max

0. 3 max

0. 015 max

0. 03 max

0. 25 max

 

 

 

Titanium needle & gauge valve mechanical properties:

element

density

melting point

tensile strength

yield strength (0. 2%offset)

elongation

titanium gr. 2

4. 5 g/cm3

1665 c (3030 f)

psi 49900 , mpa 344

psi  39900 , mpa  275

20 %



Additional Information:

  • Packaging Details: Titanium Needle Valves are surface wash and clean to remove all impurities and stock in the warehouse. Then it is wrapped in thin plastic and also it ends are protected by plastic caps to avoid any damage in transit. Titanium Needle Valves is bundled in bubble wrap followed by assorting them in colored plastic bundles. An outer rope is tied to protect the tubing and they are packed in wooden box or container. M P Jain Provide Titanium Needle Valves with all necessary documents such as commercial invoice, packing list, Test Reports, HS Code, Country of Origin attested by the chamber of commerce, Fumigation Certificate, Warranty Letter, and Base Material Certificates. Every lot is supplied with a material test certificate as per EN 10204 NACE 3.1 standards indicating the chemical and mechanical properties of the Instrumentation Tubes. We also confirm the guarantee of the Titanium Needle Valves supplied as per Purchase order specifications and attest the same in the Material Test Certificate. We also welcome any third party inspection from an agency nominated by the customer to comply with NACE 3.2 Certification if required by the customer at an extra cost.
Get Best QuoteRequest A Callback
SMO 254 Needle Gauge Valves

SMO 254 Needle Gauge Valves

Product Price: Rs 200 / PCSGet Best Price

Product Details:
Usage/ApplicationIndustrial
Size50 mm Max
BrandMPJ
Material GradeSMO 254
TemperatureMax. 650 Degree F
Maximum Working Pressure6000 psig (413 bar)
ThreadBSPT

M P Jain Tubing Solutions is a known supplier and manufacturer of SMO 254 Needle Gauge Valves, which can be offered in customized length sizes and shapes, and are available at market leading prices. SMO 254 Needle & Gauge Valves was developed for better creep resistance and also for elevated strength at temperatures higher than 537°C. SMO 254 is the high alloy austenitic stainless steel that is created for use in the seawater as well as in other aggressive chloride bearing media. The steel is having many good properties to offer like the good resistant ability to crevice corrosion and pitting. It is having very good general corrosion resistance ability, stress corrosion cracking ability. Also, it is having good weldability. It is having greater strength than the conventional austenitic stainless steel. 

 

Alloy 254 Screwed Bonnet Valve, DIN 1.4547 Angle Needle Valve, UNS S31254 Needle Valves Exporter, 254 SMO Mini Needle Valve, SMO 254 High Pressure Needle Valve, SMO 254 Union Bonnet Needle Valves, 254 SMO Bar Stock Needle Valve, SMO 254 Instrumentation Needle Valve, SMO 254 Needle & Gauge Valve Supplier in Mumbai, India.


SMO 254 Needle/Gauge Valves Equivalent Standard Grade:

STANDARD

UNS

WNR.

AFNOR

SIS

JIS

SMO 254

S31254

1.4547

Z1 CNDU 20.18.06Az

X1CrNiMoCuN20-18-7

2378

 

SMO 254 Needle & Gauge Valve Chemical Composition:

Grade

Ni

C

Mo

Mn

Si

F

Cu

S

P

Cr

SMO 254

17.5 – 18.5

0.02 max

6 – 6.5

1 max

0.8 max

0.5 – 1

0.01 max

0.03 max

19.5 – 20.5

 

SMO 254 Needle Valve Mechanical Properties:

Element

Density

Melting Point

Yield Strength (0.2%Offset

Tensile Strength

Elongation

SMO 254

8.0 g/cm3

1320-1390 ???

300

650

35 %



Additional Information:

  • Packaging Details: SMO 254 Needle Valves are surface wash and clean to remove all impurities and stock in the warehouse. Then it is wrapped in thin plastic and also it ends are protected by plastic caps to avoid any damage in transit. SMO 254 Needle Valves is bundled in bubble wrap followed by assorting them in colored plastic bundles. An outer rope is tied to protect the tubing and they are packed in wooden box or container. M P Jain Provide SMO 254 Needle Valves with all necessary documents such as commercial invoice, packing list, Test Reports, HS Code, Country of Origin attested by the chamber of commerce, Fumigation Certificate, Warranty Letter, and Base Material Certificates. Every lot is supplied with a material test certificate as per EN 10204 NACE 3.1 standards indicating the chemical and mechanical properties of the Instrumentation Tubes. We also confirm the guarantee of the SMO 254 Needle Valves supplied as per Purchase order specifications and attest the same in the Material Test Certificate. We also welcome any third party inspection from an agency nominated by the customer to comply with NACE 3.2 Certification if required by the customer at an extra cost.
Get Best QuoteRequest A Callback
Monel Needle Valves

Monel Needle Valves

Product Price: Rs 200 / PieceGet Best Price

Product Details:
Size2"
BrandMPJ
MaterialMonel
TemperatureMax. 650 Degree F (343 Degree C)
Maximum Working Pressure6000 psig (413 bar)
ThreadThreaded NPT
Density8.8 g/cm3

As one of the leading industrial Monel Needle & Gauge Valves producer, virgin engineers has been always been a venture to continuously strengthen the commerce of our clients by fulfilling their needs. We create these gauges and needle valves in a number of standards, designations, specifications, custom dimensions, and non-standard dimensions. Monel Needle Valves are known for their thermal stability and functionality. These can be applied to the most critical and demanding applications. The pressurized applications make it an utmost option for the industrial sectors. These valves are prominent options where the leakage is a concern. These gauges and needle valves perform great against pitting and crevice corrosion when exposed in the cyclic reducing environments.

 

Monel Multiport Gauge Valves, Monel Screwed End Needle Valve, Monel Alloy Parker Needle Valve, Monel  Alloy Gauge Vent Valves Exporters, Monel Hydraulic Needle Valve, Monel  Alloy Integral Bonnet Needle Valve, Monel Needle Valve, Monel Alloy Gauge Valve, Monel Needle / Gauge Valves, Monel Forged Body Gauge Valve, Monel Alloy Autoclave Needle Valve, Monel Needle and Gauge Valves Supplier in Mumbai, India.


Specifications

  • Size: 1/8" TO 2" (3 mm to 50 mm) Max
  • BSPT, BSPP, Butt Weld, Socket Weld, Compression Fittings.


Monel 400 Needle &n Gauge Valves Equivalent Standard Grade:

STANDARD

UNS

WNR.

AFNOR

EN

JIS

BS

GOST

Monel 400

N04400

2.4360

NU-30M

NiCu30Fe

NW 4400

NA 13

?????????? 28-2,5-1,5


Monel 400 Needle & Gauge Valve Chemical Composition:

Grade

Ni

C

Al

Mn

Si

Fe

Cu

S

Monel 400

63.0 min

0.3 max

0.50 max

2.0 max

0.5 max

1.0 – 2.5

28.0 – 34.0

0.02 max


Monel 400 Needle Valve Mechanical Properties:

Density

Melting Point

Yield Strength (0.2%Offset)

Tensile Strength

Elongation

8.8 g/cm3

1350 °C (2460 °F)

Psi – 35,000 , MPa – 240

Psi – 80,000 , MPa – 550

40 %



Additional Information:

  • Packaging Details: Monel Needle Valves are surface wash and clean to remove all impurities and stock in the warehouse. Then it is wrapped in thin plastic and also it ends are protected by plastic caps to avoid any damage in transit. Monel Needle Valves is bundled in bubble wrap followed by assorting them in colored plastic bundles. An outer rope is tied to protect the tubing and they are packed in wooden box or container. M P Jain Provide Monel Needle Valves with all necessary documents such as commercial invoice, packing list, Test Reports, HS Code, Country of Origin attested by the chamber of commerce, Fumigation Certificate, Warranty Letter, and Base Material Certificates. Every lot is supplied with a material test certificate as per EN 10204 NACE 3.1 standards indicating the chemical and mechanical properties of the Instrumentation Tubes. We also confirm the guarantee of the Monel Needle Valves supplied as per Purchase order specifications and attest the same in the Material Test Certificate. We also welcome any third party inspection from an agency nominated by the customer to comply with NACE 3.2 Certification if required by the customer at an extra cost.
Get Best QuoteRequest A Callback
Alloy Steel Needle Valves

Alloy Steel Needle Valves

Product Price: Rs 200 / PCSGet Best Price

Product Details:
Size1"
BrandMPJ
MaterialAlloy steel
DesignForged Body with Inline
ConnectionFemale to Female
Maximum Working Pressure6000 PSIG
Valve TypeNeedle Valve

M P Jain tubing Solutions is a known Stockist, manufacturer and exporter of Alloy Needle & Gauge Valves which offers some excellent corrosion resistance, as well as elevated hardness and strength. These can be available at different design, sizes, connection, flow pattern, end connections, working pressure, temperature rating, etc. The offered ranges of Chromium Molybdenum Needle & Gauge Valves manufacturing is done by using the very good quality of alloy that is sourced from the reliable market mills.


Alloy Steel Gauge Valves, Alloy Steel Industrial Needle & Gauge Valve, Alloy 20 Bar Stock Needle Valve, Chrome Moly Needle & Gauge Valves, Chromium molybdenum Needle and Gauge Valves, UNS N08020 Needle Valves, Incoloy Alloy 20 High Pressure Needle Valve, Alloy 20 Union Bonnet Needle Valves, DIN 2.4660 Angle Needle Valve, Alloy 20 Screwed Bonnet Valve, Alloy 20 Instrumentation Needle Valve, Carpenter 20Cb-3 Mini Needle Valve, Alloy 20 Needle & Gauge Valve Supplier in Mumbai, India.


Alloy Needle & Gauge Valves Equivalent Standard Grade:

STANDARD

UNS

WNR.

AFNOR

EN

Alloy 20

N08020

2.4660

Z2NCUD31-20AZ

NiCr20CuMo


Alloy Needle & Gauge Valve Chemical Composition:

Grade

Ni

C

Mn

P

S

Si

Cr

Nb

Mo

Cu

Alloy 20

32 – 38

0.02 max

1 – 2

0.02 max

0.005 max

0.7 max

19 – 21

0.1 – 0.3

2 – 3

3 – 4

 

Alloy Needle & Gauge Valve Mechanical Properties:

Element

Density

Melting Point

Tensile Strength

Yield Strength (0.2%Offset)

Elongation

Alloy 20

8.1 g/cm3

1443 °C (2430 °F)

Psi -80,000, MPa -551

Psi – 35,000, MPa – 241

30 %



Additional Information:

  • Packaging Details: Alloy Steel Needle Valves are surface wash and clean to remove all impurities and stock in the warehouse. Then it is wrapped in thin plastic and also it ends are protected by plastic caps to avoid any damage in transit. Alloy Steel Needle Valves is bundled in bubble wrap followed by assorting them in colored plastic bundles. An outer rope is tied to protect the tubing and they are packed in wooden box or container. M P Jain Provide Alloy Steel Needle Valves with all necessary documents such as commercial invoice, packing list, Test Reports, HS Code, Country of Origin attested by the chamber of commerce, Fumigation Certificate, Warranty Letter, and Base Material Certificates. Every lot is supplied with a material test certificate as per EN 10204 NACE 3.1 standards indicating the chemical and mechanical properties of the Instrumentation Tubes. We also confirm the guarantee of the Alloy Steel Needle Valves supplied as per Purchase order specifications and attest the same in the Material Test Certificate. We also welcome any third party inspection from an agency nominated by the customer to comply with NACE 3.2 Certification if required by the customer at an extra cost.
Get Best QuoteRequest A Callback
SMO 254 Ball Valves

SMO 254 Ball Valves

Product Price: Rs 310 / PIECEGet Best Price

Product Details:
BrandMPJ
Usage/ApplicationDairy Food & Beverages
Connector TypeThreaded
Size4"
Material GradeSMO 254
Packaging TypeBox
ThreadBSPP

M P Jain Tubing Solutions is one of the leading stockist, manufacturer, and exporter of SMO 254 Instrumentation ball valve. These SMO instrumentational ball Valves are known for their excellent resistance to pitting, crevice corrosion, stress corrosion cracking, and higher strength as compared to conventional austenitic stainless-steels. Our 254 SMO Ball Valves are high-alloy austenitic stainless-steel types which are specially developed for use in sea-water, as well as aggressive chloride-bearing media. These Valves can be used for include for Heat exchangers, Piping, Valves, Pumps, Flue gas scrubbers among others. SMO 254 instrumentation ball valves are having many features to offer due to which it has become a right selection for various users. Some features found in it is compact design, every valve provided is tested, available in ranges of materials, high-pressure rating available is till 15000 PSI, dust cap provided, low operating torque, ranges of end connections (BSPT, BSPP, etc) are available.


SMO 254 High Pressure Instrumentation Ball Valves, SS SMO 254 Top Entry Ball Valves, Alloy 254 Flanged Ball Valve, SS SMO 254 Trunnion Ball Valve Exporters, Stainless Steel SMO 254 Three-piece Ball Valves, SMO 6MOLY Swing Out Ball Valves, 254 SMO Lined Ball Valves Supplier , 254 SMO Single-piece Ball Valve, Alloy 254 Two-piece Ball Valves, SMO 254 Encapsulated instrumentation Ball Valve, Alloy 254 Floating Ball Valves, SMO 6moly Rising Stem Ball Valves.

 

SMO 254 Instrumentation Ball Valve Equivalent Grade:

STANDARD 

WERKSTOFF NR.

UNS

JIS

BS

GOST

AFNOR

EN

OR

SMO 254

1.4547

S31254

-

-

-

Z1 CNDU 20.18.06Az

X1CrNiMoCuN20-18-7

-

 

SMO 254 Instrumentation Ball Chemical Composition:

Grade

%

Ni

Cr

Mo

Cu

N

C

Mn

Si

P

S

SMO 254

Min.

17.5

19.5

6

0.5

0.18

Max.

18.5

20.5

6.5

1

0.22

0.02

1

0.8

0.03

0.01

 

SMO 254  Instrumentation Ball Valve Mechanical Properties:

Density 

Melting Point

Tensile Strength

Yield Strength (0.2%Offset)

Elongation

SMO 254

8.0 g/cm3

1320-1390 ???

650

300

35



Additional Information:

  • Packaging Details: SMO 254 Ball Valves are surface wash and clean to remove all impurities and stock in the warehouse. Then it is wrapped in thin plastic and also it ends are protected by plastic caps to avoid any damage in transit. SMO 254 Ball Valves is bundled in bubble wrap followed by assorting them in colored plastic bundles. An outer rope is tied to protect the tubing and they are packed in wooden box or container. M P Jain Provide SMO 254 Ball Valves with all necessary documents such as commercial invoice, packing list, Test Reports, HS Code, Country of Origin attested by the chamber of commerce, Fumigation Certificate, Warranty Letter, and Base Material Certificates. Every lot is supplied with a material test certificate as per EN 10204 NACE 3.1 standards indicating the chemical and mechanical properties of the Instrumentation Tubes. We also confirm the guarantee of the SMO 254 Ball Valves supplied as per Purchase order specifications and attest the same in the Material Test Certificate. We also welcome any third party inspection from an agency nominated by the customer to comply with NACE 3.2 Certification if required by the customer at an extra cost.
Get Best QuoteRequest A Callback
Duplex Steel Ball Valve

Duplex Steel Ball Valve

Product Price: Rs 150 / PieceGet Best Price

Product Details:
MaterialDuplex Steel
Size4"
MediaGas
Material GradeS31803
Country of OriginMade in India
TemperatureMax. 648 Degree C
StandardSMS

M P Jain Tubing Solutions is a prominent supplier, manufacturer, and exporter that are catering a wide range of Duplex Steel Ball Valves all over the world. By means of various characteristics such as durability, robust design, strong construction, resistance consistency, and dimensional accuracy these are greatly accepted by the clients. Duplex Steel S31803 / S32205 Instrumentation Ball Valves are high-performance ball valves that are formed with the most extensively used duplex stainless steel grade containing molybdenum, nitrogen and nickel content. These are austenitic-ferritic steel valves that offer superior resistance to corrosion and high strength. This alloy of valves also exhibits superior resistance to localized corrosion including pitting, crevice, and intergranular corrosion. These have good high-temperature oxidation resistance and are susceptible to chlorides stress corrosion cracking.

 

Duplex Steel S31803 / S32205 High Pressure Instrumentation Ball Valves, Duplex Steel 2205 Instrumentation Ball Valve, Duplex S32205/2205 Lined Ball Valves, Ferritic Stainless Steel S32205 Floating Ball Valves, Duplex S32205 Trunnion Ball Valve, Duplex S32205 Three-piece Ball Valves, Duplex Stainless Steel S31803 Flanged Ball Valve, Duplex Steel S32205 Swing Out Ball Valves, Duplex S32205 Single-piece Ball Valve, Duplex S31803 Rising Stem Ball Valves, Duplex S31803 Top Entry Ball Valves, Duplex Steel S32205 Two-piece Ball Valves, Duplex Steel S31803 Encapsulated instrumentation Ball Valve, Duplex S32205/2205 Instrumentation Ball Valve exporter in india.

 

Duplex Instrumentation Ball Valves Equivalent Grades:

STANDARD

WERKSTOFF NR.

UNS

Duplex 2205

1.4462

S31803 / S32205

 

Duplex Instrumentation Ball Valves Chemical Properties:

Grade

C

Mn

Si

P

S

Cr

Mo

Ni

N

Fe

S31803

0.030 max

2.00 max

1.00 max

0.030 max

0.020 max

22.0 – 23.0

3.0 – 3.5

4.50 – 6.50

0.14 – 0.20

63.72 min

S32205

0.030 max

2.00 max

1.00 max

0.030 max

0.020 max

21.0 – 23.0

2.50 - 3.50

4.50 – 6.50

0.8 – 0.20

63.54 min



Additional Information:

  • Packaging Details: Duplex Steel Ball Valves are surface wash and clean to remove all impurities and stock in the warehouse. Then it is wrapped in thin plastic and also it ends are protected by plastic caps to avoid any damage in transit. Duplex Steel Ball Valves is bundled in bubble wrap followed by assorting them in colored plastic bundles. An outer rope is tied to protect the tubing and they are packed in wooden box or container. M P Jain Provide Duplex Steel Ball Valves with all necessary documents such as commercial invoice, packing list, Test Reports, HS Code, Country of Origin attested by the chamber of commerce, Fumigation Certificate, Warranty Letter, and Base Material Certificates. Every lot is supplied with a material test certificate as per EN 10204 NACE 3.1 standards indicating the chemical and mechanical properties of the Instrumentation Tubes. We also confirm the guarantee of the Duplex Steel Ball Valves supplied as per Purchase order specifications and attest the same in the Material Test Certificate. We also welcome any third party inspection from an agency nominated by the customer to comply with NACE 3.2 Certification if required by the customer at an extra cost.
Get Best QuoteRequest A Callback
Stainless Steel Ball Valve

Stainless Steel Ball Valve

Product Price: Rs 150 / PieceGet Best Price

Product Details:
BrandMPJ
Material GradeSS 304
End Connection TypeFlanged
Size1"
MaterialStainless Steel
TemperatureMax. 1200 Degree F(648 Degree C)
Usage/ApplicationFertilizer Plants

M P Jain tubing Solutions is the leading manufacturer, stockist, and supplier of SS Instrumentation Ball Valves. Stainless Steel Instrumentation Ball Valves are the kind of valves that control the run of gas or liquid through methods for rotating ball considering a bore. This scope of ball valves includes long service life and offers consistent sealing above the life span. Well talking about its grade these range of ball valves are designed from a stainless steel alloy that mainly consists of chromium and iron content. Likewise, it additionally includes additional content for example, nickel, aluminium, copper and molybdenum content that enhances good oxidation and corrosion resistance at elevated temperatures. These ball valves have excellent self-healing property.


Stainless Steel High Pressure Instrumentation Ball Valves, SS Flanged Ball Valve, SS Trunnion Ball Valve Exporters, SS Two-piece Ball Valves, SS Three-piece Ball Valves, SS Single-piece Ball Valve, SS Top Entry Ball Valves, Stainless Steel Lined Ball Valves, Stainless Steel Encapsulated instrumentation Ball Valve, SS Floating Ball Valves, SS Rising Stem Ball Valves, Stainless Steel Swing Out Ball Valves Supplier in Mumbai, India.


Stainless Steel Instrumentation Ball Valve Equivalent grade:

STANDARD

WERKSTOFF NR.

UNS

JIS

BS

GOST

AFNOR

EN

SS 304

1.4301

S30400

SUS 304

304S31

08??18??10

Z7CN18???09

X5CrNi18-10

SS 304L

1.4306 / 1.4307

S30403

SUS 304L

3304S11

03??18??11

Z3CN18???10

2CrNi18-9 / X2CrNi19-11


Stainless Steel Instrumentation Ball Valve Chemical Properties:

Grade

C

Mn

Si

P

S

Cr

Mo

Ni

N

SS 304

0.08 max

2 max

0.75 max

0.045 max

0.030 max

18 – 20

-

8 – 11

-

SS 304L

0.035 max

2.0 max

1.0 max

0.045 max

0.03 max

18 – 20

-

8 – 13

-

SS 304H

0.10 max

2.0 max

0.75 max

0.045 max

0.03 max

18 – 20

-

8 – 10.5

-



Additional Information:

  • Packaging Details: Stainless Steel Ball Valves are surface wash and clean to remove all impurities and stock in the warehouse. Then it is wrapped in thin plastic and also it ends are protected by plastic caps to avoid any damage in transit. Stainless Steel Ball Valves is bundled in bubble wrap followed by assorting them in colored plastic bundles. An outer rope is tied to protect the tubing and they are packed in wooden box or container. M P Jain Provide Stainless Steel Ball Valves with all necessary documents such as commercial invoice, packing list, Test Reports, HS Code, Country of Origin attested by the chamber of commerce, Fumigation Certificate, Warranty Letter, and Base Material Certificates. Every lot is supplied with a material test certificate as per EN 10204 NACE 3.1 standards indicating the chemical and mechanical properties of the Instrumentation Tubes. We also confirm the guarantee of the Stainless Steel Ball Valves supplied as per Purchase order specifications and attest the same in the Material Test Certificate. We also welcome any third party inspection from an agency nominated by the customer to comply with NACE 3.2 Certification if required by the customer at an extra cost.
Get Best QuoteRequest A Callback
Alloy Steel Ball Valve

Alloy Steel Ball Valve

Product Price: Rs 270 / PCSGet Best Price

Product Details:
Size1"
BrandMPJ
Usage/ApplicationIndustrial
Pressure6000 psi (413 bar).
MaterialAlloy Steel
Temperature Of MediaMax. 400 Degree C
StandardDIN

M P Jain Tubing Solution is the stockist, supplier, manufacturer of the superior quality and wide ranges of the Alloy Steel Ball Valves. We are supplying the manufactured valves to both the national and international clients. On the other hand, the instrumental valves are also available in different specifications like shape, size, dimensions, surface finish, end finish, and toughness. Alloy steel is the steel that with the ranges of elements are alloyed and that thus improves mechanical properties. Alloy steel is broken down in two groups that are high alloy steel and low alloy steel. Alloy steel is the standard term that refers to the steel with other alloying compounds. It is having manganese, chromium, silicon, boron, molybdenum. The less common alloying elements are like aluminium, cerium, lead, copper, niobium, etc.  A ball valve is a form of quarter-turn valve which uses a hollow, perforated and pivoting ball (called a "floating ball") to control flow through it. It is open when the ball's hole is in line with the flow and closed when it is pivoted 90-degrees by the valve handle. The handle lies flat in alignment with the flow when open, and is perpendicular to it when closed, making for easy visual confirmation of the valve's status.


Alloy Steel Instrument Ball Valve, Cr-Mo 2 - Way Ball Valve, Chrome Moly Instrumentation Ball Valve, Alloy Steel 3 - way Ball Valves, Chrome Moly Instrumentation Ball Valves, Cr-Mo Ball Valves Suppliers, Alloy Steel One-Piece Instrumentation Ball Valves, Alloy Steel High Pressure Instrumentation Ball Valves, Cr-Mo Flanged Ball Valve, Alloy Steel Trunnion Ball Valve Exporters, Chrome Moly Three-piece Ball Valves, Alloy Steel Single-piece Ball Valve, Cr-Mo Two-piece Ball Valves, Chromium Molybdenum Encapsulated instrumentation Ball Valve, Alloy Steel Floating Ball Valves, Alloy Steel Rising Stem Ball Valves, Alloy Steel Swing Out Ball Valves, Chromium Molybdenum Lined Ball Valves Supplier in Mumbai, India.



Additional Information:

  • Packaging Details: Alloy Steel Ball Valves are surface wash and clean to remove all impurities and stock in the warehouse. Then it is wrapped in thin plastic and also it ends are protected by plastic caps to avoid any damage in transit. Alloy Steel Ball Valves is bundled in bubble wrap followed by assorting them in colored plastic bundles. An outer rope is tied to protect the tubing and they are packed in wooden box or container. M P Jain Provide Alloy Steel Ball Valves with all necessary documents such as commercial invoice, packing list, Test Reports, HS Code, Country of Origin attested by the chamber of commerce, Fumigation Certificate, Warranty Letter, and Base Material Certificates. Every lot is supplied with a material test certificate as per EN 10204 NACE 3.1 standards indicating the chemical and mechanical properties of the Instrumentation Tubes. We also confirm the guarantee of the Alloy Steel Ball Valves supplied as per Purchase order specifications and attest the same in the Material Test Certificate. We also welcome any third party inspection from an agency nominated by the customer to comply with NACE 3.2 Certification if required by the customer at an extra cost.
Get Best QuoteRequest A Callback
Hastelloy Ball Valve

Hastelloy Ball Valve

Product Price: Rs 270 / PieceGet Best Price

Product Details:
Size1"
Country of OriginMade in India
MaterialHastelloy
Temperature400 Degree C
StandardASTM
Pressure rating6000 psi (413 bar).

M P Jain tubing Solutions is the one of the largest manufacturer, supplier and exporter of Hastelloy Instrumentation Ball valves. To fulfil each and every demand of the clients we produce these instrumentation ball valves in various designations, standards, specifications, and custom dimensions also in other altered dimensions. With trending machines and equipment we produce high quality instrumentation ball valves with accurate dimensions and surface finish. We are also provides treated surface and tolerance limit one can choose as per the suitability. The high-performance Instrumentation Hastelloy C276 Valves have superior resistance to various acids. For instance, the Hastelloy C276 Ball Valves have the ability to resist acids like sulfuric, hydrochloric, hydrofluoric, nitric, and chromic acid. The Hastelloy Ball Valve even have good localized corrosion resistance.

 

Hastelloy Manifold Valve Equivalent Grade:

Standard

UNS

WERKSTOFF NR.

AFNOR

JIS

GOST

OR

EN

Hastelloy C276

N10276

2.4819

-

 

NW 0276

 

????65??????

????760

 

NiMo16Cr15W

 

Hastelloy C22

 

N06022

2.4602

-

 

NW 6022

-

-

 

NiCr21Mo14W

 

Hastelloy Manifold Valve Chemical Properties:

Standard

C

Mn

Si

S

Co

Ni

Cr

Fe

Mo

P

 

Hastelloy C22

0.010 max

0.50 max

0.08 max

0.02 max

2.50 max

50.015 min*

20.00 – 22.50

2.00 – 6.00

12.50 – 14.50

0.02 max

Hastelloy C276

0.010 max

1.00 max

0.08 max

0.03 max

2.50 max

50.99 min*

14.50 – 16.50

4.00 – 7.00

15.00 – 17.00

0.04 max




Additional Information:

  • Packaging Details: Hastelloy Ball Valves are surface wash and clean to remove all impurities and stock in the warehouse. Then it is wrapped in thin plastic and also it ends are protected by plastic caps to avoid any damage in transit. Hastelloy Ball Valves is bundled in bubble wrap followed by assorting them in colored plastic bundles. An outer rope is tied to protect the tubing and they are packed in wooden box or container. M P Jain Provide Hastelloy Ball Valves with all necessary documents such as commercial invoice, packing list, Test Reports, HS Code, Country of Origin attested by the chamber of commerce, Fumigation Certificate, Warranty Letter, and Base Material Certificates. Every lot is supplied with a material test certificate as per EN 10204 NACE 3.1 standards indicating the chemical and mechanical properties of the Instrumentation Tubes. We also confirm the guarantee of the Hastelloy Ball Valves supplied as per Purchase order specifications and attest the same in the Material Test Certificate. We also welcome any third party inspection from an agency nominated by the customer to comply with NACE 3.2 Certification if required by the customer at an extra cost.
Get Best QuoteRequest A Callback
Stainless Steel Manifold Valves
  • Stainless Steel Manifold Valves
  • Stainless Steel Manifold Valves

Stainless Steel Manifold Valves

Product Price: Rs 80 / PCSGet Best Price

Product Details:
Size25 mm
BrandMPJ
Usage/ApplicationHeavy Industrial Instrumentality
PressureHigh Pressure
MaterialSS
Country of OriginMade in India
Working Pressure6000 psig (413 bar)
Product Code113343
Number of Valve3 Valve
Max. Temperature343 Degree C
Steel GradeSS316

M P Jain Tubing Solutions offers a series of compact Manifold Valves for use with pressure and differential pressure instruments. SS manifold valves is utilized in quantities of applications from the mobile machinery to the heavier industrials tools. The valves are having well-improved effectiveness and diminished expenses. It is intended for the liquid level, static pressure and furthermore extraordinary weight applications. The valves are having a lot of minimal potential leaks and are simpler for one to install as well as maintain. It is having a minimized get together that is clarifying its decreased weight and sizes. The Stainless Steel Manifold Valves are fabricated to bear all differential pressure and liquid level application needs. The SS Manifold Valves are accessible in 5 way Manifold Valves, 3 way Manifold Valves, and 2 way Manifold Valves product designs. The 5 valve Manifold and 3 Valve Manifolds are intended to endure and keeping up the differential pressure applications. The 2 valve Manifolds are designed to withstand static pressure in a mechanical setting.  The Manifold Valves have been planned with a temperature rating with operating parameters which range up to 232ºC with packing of PTFE and optional 428ºC with packing of graphite. The Manifold Valves are designed and made to withstand a pressure parameter rating of up to 6000 PSIG. Manifold valve is made available at a different sizes, design, flow pattern, end connections, temperature rating, connections, working pressure.

 

Stainless Steel 2 Valve Manifold, SS Bellows Sealed Manifolds, Stainless Steel Direct-Mount Manifolds, Stainless Steel 5 Valve Manifold, SS Instrumentation Manifold Valves, SS 3 Valve Manifold, SS Valves Manifolds Exporters, Stainless Steel Double Block Bleed Valves, SS Block and Bleed Valves, SS Hydraulic Manifold, SS Remote-Mount Manifold Supplier in Mumbai, India, Stainless Steel V, VB, and VL series Manifolds, SS H Series Manifold Valves, SS R - Type Manifold Valve, SS Remote-Mount, SS Three Way T- Type Manifold Valves in Mumbai, India.


Specifications:

  • Steel Grade: SS 316, SS 304, C.S, F11, Hastelloy, Monel 400
  • Size: 1/4 to 1 in.; 6 to 25 mm
  • Shape: 'T' Type & 'H' Type
  • Temperature Range -20 to 650 Deg F (-28 to 343 Deg C)
  • Range: 2 Way, 3 Way, 5 Way

 



Additional Information:

  • Packaging Details: Stainless Steel Manifold Valve are surface wash and clean to remove all impurities and stock in the warehouse. Then it is wrapped in thin plastic and also it ends are protected by plastic caps to avoid any damage in transit. Stainless Steel Manifold Valve is bundled in bubble wrap followed by assorting them in colored plastic bundles. An outer rope is tied to protect the tubing and they are packed in wooden box or container. M P Jain Provide Stainless Steel Manifold Valve with all necessary documents such as commercial invoice, packing list, Test Reports, HS Code, Country of Origin attested by the chamber of commerce, Fumigation Certificate, Warranty Letter, and Base Material Certificates. Every lot is supplied with a material test certificate as per EN 10204 NACE 3.1 standards indicating the chemical and mechanical properties of the Instrumentation Tubes. We also confirm the guarantee of the Stainless Steel Manifold Valve supplied as per Purchase order specifications and attest the same in the Material Test Certificate. We also welcome any third party inspection from an agency nominated by the customer to comply with NACE 3.2 Certification if required by the customer at an extra cost.
Get Best QuoteRequest A Callback
Monel Ball Valves

Monel Ball Valves

Product Price: Rs 220 / PCSGet Best Price

Product Details:
MaterialMonel
Size1"
BrandMPJ
Usage/ApplicationIndustrial
Pressure6000 psi (413 bar).
Temperature Of MediaMax. 400 Degree C
Material GradeMonel 400

We at M P Jain Tubing Solutions, assembled our experience and skilled labour to develop products that are known to offer high quality and utility. There are few kinds of valves available in different standards and specifications but Monel Instrumentation Ball Valves are mostly preferred in industries due to its excellent features. 


Monel instrumentation Ball Valves Equivalent Grades:

STANDARD

UNS

WNR.

AFNOR

EN

JIS

BS

GOST

Monel 400

N04400

2.4360

NU-30M

NiCu30Fe

NW 4400

NA 13

?????????? 28-2,5-1,5

Monel K500

N05500

2.4375

NU-30M

NiCu30Fe

NW 4400

NA 13

?????????? 28-2,5-1,5


Monel Manifold Valves Chemical Composition: 

Grade

Ni

C

Al

Mn

Si

Fe

Cu

S

Monel 400

63.0 min

0.3 max

0.50 max

2.0 max

0.5 max

1.0 – 2.5

28.0 – 34.0

0.02 max

Monel K500

63..00 min

0.25 max

-

1.5 max

0.5 max

0.5 - 2

27.00- 33.00

0.010 max


Monel 400 Manifold Valves Mechanical Properties: 

Grade

Density

Melting Point

Yield Strength (0.2%Offset)

Tensile Strength

Elongation

Monel

400

8.8 g/cm3

1350 °C (2460 °F)

Psi – 35,000 ,

MPa – 240

Psi – 80,000 ,

MPa – 550

40 %

K500

8.44 g/cm3

1350 °C (2460 °F)

Psi – 115000 ,

MPa – 790

Psi – 160000 , MPa – 1100

20 %



Additional Information:

  • Packaging Details: Monel Ball Valves are surface wash and clean to remove all impurities and stock in the warehouse. Then it is wrapped in thin plastic and also it ends are protected by plastic caps to avoid any damage in transit. Monel Ball Valves is bundled in bubble wrap followed by assorting them in colored plastic bundles. An outer rope is tied to protect the tubing and they are packed in wooden box or container. M P Jain Provide Monel Ball Valves with all necessary documents such as commercial invoice, packing list, Test Reports, HS Code, Country of Origin attested by the chamber of commerce, Fumigation Certificate, Warranty Letter, and Base Material Certificates. Every lot is supplied with a material test certificate as per EN 10204 NACE 3.1 standards indicating the chemical and mechanical properties of the Instrumentation Tubes. We also confirm the guarantee of the Monel Ball Valves supplied as per Purchase order specifications and attest the same in the Material Test Certificate. We also welcome any third party inspection from an agency nominated by the customer to comply with NACE 3.2 Certification if required by the customer at an extra cost.
Get Best QuoteRequest A Callback
Nickel Alloy Ball Valves

Nickel Alloy Ball Valves

Product Price: Rs 300 / PieceGet Best Price

Product Details:
BrandMPJ
Usage/ApplicationPetrochemicals Gas Processing
Connector TypeThreaded
MaterialNickel Alloy
Size16"
Material GradeNickel 200
Packaging TypeBox

In the M P Jain tubing Solutions, Nickel Alloy Ball Valves are manufactured by using good quality of raw materials complied with raw material standard quality. Also, the producers are considering production guidelines that are resulting definitely in bringing out the good quality of Alloy UNS N02201 Ball Valves that effectively satisfy the wants of any type of application that are mandatory. Nickel 200 Valves are primarily selected for use in high temperature and/or corrosive environments. These Nickel 201 Valves is a material used in the food and chemical industry, especially if the fluid contains sodium hydroxide. Ball valves are the flow valves that are quarter turn and are straight through the apparatuses. These valves allow for the shutting off or to control. The valves are having round closure elements that are having a matching pair of the rounded seats. These seats allow essential sealing for taking place. The ball valves material and pressure rating is used to determine the type of seal needed.


Nickel Ball Valves, Nickel Alloy Instrument Ball Valve Suppliers, Nickel 2 - Way Ball Valve, Nickel Alloy 3 - way Ball Valves, Nickel Alloy One-Piece Instrumentation Ball Valves, Nickel Single-piece Ball Valve, Nickel Alloy Two-piece Ball Valves, Nickel Alloy Instrumentation Ball Valves, Nickel Alloy Three-piece Ball Valves, Nickel Trunnion Ball Valve Exporters, Nickel Alloy Flanged Ball Valve, Nickel Alloy High Pressure Instrumentation Ball Valves, Nickel Alloy Swing Out Ball Valves, Nickel Lined Ball Valves, High Nickel Alloy Encapsulated instrumentation Ball Valve, Nickel Rising Stem Ball Valves, Nickel Alloy Top Entry Ball Valves, Nickel Floating Ball Valves, Nickel Alloy Instrumentation Ball Valve Manufacturers in Mumbai, India.


Nickel Alloy Instrumentation Ball Valve Equivalent Grade:

STANDARD

WNR.

UNS

JIS

BS

GOST

AFNOR

EN

Nickel Alloy 200

2.4066

N02200

NW 2200

NA 11

????-2

N-100M

Ni 99.2

Nickel Alloy 201

2.4068

N02201

NW 2201

NA 12

????-2

-

LC-Ni 99


Nickel Alloy Instrumentation Ball Valve Chemical Properties:

Grade

C

Mn

Si

S

Cu

Fe

Ni

Nickel Alloy 200

0.15 max

0.35 max

0.35 max

0.01 max

0.25 max

0.40 max

99.0 min

Nickel Alloy 201

0.02 max

0.35 max

0.35 max

0.01 max

0.25 max

0.40 max

99.0 min


Size:
  • The Size Of The Product Is Ranging In 1/8" To 16"


Additional Information:

  • Packaging Details: Nickel Alloy Ball Valves are surface wash and clean to remove all impurities and stock in the warehouse. Then it is wrapped in thin plastic and also it ends are protected by plastic caps to avoid any damage in transit. Nickel Alloy Ball Valves is bundled in bubble wrap followed by assorting them in colored plastic bundles. An outer rope is tied to protect the tubing and they are packed in wooden box or container. M P Jain Provide Nickel Alloy Ball Valves with all necessary documents such as commercial invoice, packing list, Test Reports, HS Code, Country of Origin attested by the chamber of commerce, Fumigation Certificate, Warranty Letter, and Base Material Certificates. Every lot is supplied with a material test certificate as per EN 10204 NACE 3.1 standards indicating the chemical and mechanical properties of the Instrumentation Tubes. We also confirm the guarantee of the Nickel Alloy Ball Valves supplied as per Purchase order specifications and attest the same in the Material Test Certificate. We also welcome any third party inspection from an agency nominated by the customer to comply with NACE 3.2 Certification if required by the customer at an extra cost.
Get Best QuoteRequest A Callback
Inconel Ball Valve

Inconel Ball Valve

Product Price: Rs 150 / PieceGet Best Price

Product Details:
Size1"
MaterialInconel
Material GradeInconel 600
Country of OriginMade in India
TemperatureMax. 400 Degree C
StandardDIN
Pressure rating6000 psi (413 bar).

M P Jain Tubing Solutions is known for manufacturing and supplying the Inconel Instrumentation Ball Valve. Inconel alloy is an iron, chromium and nickel alloy. Inconel Ball valves are created by utilizing top notch crude materials.  It has brilliant attributes such as withstanding in higher temperatures without elongation and distortion. We are capable in quality products and service, on time delivery with 100% protected mode. We are supported up by the group of experts who are occupied with the quality creation of instrumentation ball valves. It is a general purpose engineering instrumentation ball valves for applications that need resistance to corrosion and heat

 

Inconel Alloy 600 Swing Out Ball Valves, Inconel 600 Lined Ball Valves, Inconel 600 Encapsulated instrumentation Ball Valve, Inconel 600 High Pressure Instrumentation Ball Valves, Inconel 600 Flanged Ball Valve, Inconel 600 Trunnion Ball Valve Exporters, Inconel 600 Three piece Ball Valves, Inconel 600 Single piece Ball Valve, Inconel 600 Two piece Ball Valves, Inconel 600 Floating Ball Valves, Inconel 600 Rising Stem Ball Valves, Inconel 600 Top Entry Ball ValvesSupplier in India

 

Inconel Manifold Valves Equivalent Grades:

STANDARD

UNS

WNR.

AFNOR

EN

JIS

BS

GOST

OR

Inconel 600

N06600

2.4816

NC15FE11M

NiCr15Fe

NCF 600

NA 13

?????????? 28 2,5 1,5

????868

Inconel 601

N06601

2.4851

NC23FeA

NiCr23Fe

NCF 601

NA 49

XH60BT

 

Inconel 625

N06625

2.4856

NC22DNB4M

NiCr22Mo9Nb

NCF 625

NA 21

????75????????

 

 

Inconel Manifold Valves Chemical Properties:

Grade

C

Mn

Si

S

Cu

Fe

Ni

Cr

Inconel 600

0.15 max

1.00 max

0.50 max

0.015 max

0.50 max

6.00 10.00

72.00 min

14.00 17.00

Inconel 601

0.10 max

1.00 max

0.50 max

0.015 max

1.00 max

Balance

58.0 63.0

21.0 25.0

Inconel 625

0.10 max

0.50 max

0.50 max

0.015 max

1.00 max

5.0 max

58.0 min

20.0 23.0



Additional Information:

  • Packaging Details: Inconel Ball Valves are surface wash and clean to remove all impurities and stock in the warehouse. Then it is wrapped in thin plastic and also it ends are protected by plastic caps to avoid any damage in transit. Inconel Ball Valves is bundled in bubble wrap followed by assorting them in colored plastic bundles. An outer rope is tied to protect the tubing and they are packed in wooden box or container. M P Jain Provide Inconel Ball Valves with all necessary documents such as commercial invoice, packing list, Test Reports, HS Code, Country of Origin attested by the chamber of commerce, Fumigation Certificate, Warranty Letter, and Base Material Certificates. Every lot is supplied with a material test certificate as per EN 10204 NACE 3.1 standards indicating the chemical and mechanical properties of the Instrumentation Tubes. We also confirm the guarantee of the Inconel Ball Valves supplied as per Purchase order specifications and attest the same in the Material Test Certificate. We also welcome any third party inspection from an agency nominated by the customer to comply with NACE 3.2 Certification if required by the customer at an extra cost.
Get Best QuoteRequest A Callback
Titanium Ball Valve

Titanium Ball Valve

Product Price: Rs 170 / PCSGet Best Price

Product Details:
MaterialTitanium
Size1"
Country of OriginMade in India
TemperatureMax. 400 Degree C
StandardBS
Pressure rating6000 psi (413 bar).
GradeTitanium Gr 2

M P Jain Tubing Solutions are fully engaged in offering Titanium instrumentation ball valves of superior quality to their reliable customers. We are the world’s leading manufacturer, supplier, exporter that is made available at various types, sizes, end connection, standards, rating, dimensions, etc. The properties that Titanium instrumentation ball valves hold has made it high in demand and thus it is used widely in many industrial applications. The titanium ball valves are having high tensile strength, perfect dimensional accuracy, smoothness in the surface, long-lastingness, anti-corrosive body, ability to hold high temperature, withstand high pressure, etc. Also, it is having resistance ability to stress corrosion cracking, pitting, oxidation, crevice corrosion, and general corrosion and can be used at acidic atmosphere as well.


Titanium Alloy One-Piece Instrumentation Ball Valves, Ti Alloy Instrumentation Ball Valve, Titanium 2 - Way Ball Valve Manufacturers, Titanium Alloy 3 - way Ball Valves, Titanium Alloy Instrumentation Ball Valves, Titanium Ball Valves, Titanium Instrument Ball Valve manufacture in Mumbai, India. 


Titanium Manifold Valve Equivalent grades:

STANDARD

UNS

WNR.

Titanium Gr 2

R50400

3.7035

Titanium Gr 5

R56400

3.7165


Titanium Manifold Valve Chemical Properties:

Grade

Ti

C

Fe

H

N

O

Ai

V

Titanium Gr 2

99.2 min

0.1 max

0.3 max

0.015 max

0.03 max

0.25 max

-

-

Titanium Gr 5

90 min

-

0.25 max

-

-

0.2 max

6 min

4 min



Additional Information:

  • Packaging Details: Titanium Ball Valves are surface wash and clean to remove all impurities and stock in the warehouse. Then it is wrapped in thin plastic and also it ends are protected by plastic caps to avoid any damage in transit. Titanium Ball Valves is bundled in bubble wrap followed by assorting them in colored plastic bundles. An outer rope is tied to protect the tubing and they are packed in wooden box or container. M P Jain Provide Titanium Ball Valves with all necessary documents such as commercial invoice, packing list, Test Reports, HS Code, Country of Origin attested by the chamber of commerce, Fumigation Certificate, Warranty Letter, and Base Material Certificates. Every lot is supplied with a material test certificate as per EN 10204 NACE 3.1 standards indicating the chemical and mechanical properties of the Instrumentation Tubes. We also confirm the guarantee of the Titanium Ball Valves supplied as per Purchase order specifications and attest the same in the Material Test Certificate. We also welcome any third party inspection from an agency nominated by the customer to comply with NACE 3.2 Certification if required by the customer at an extra cost.
Get Best QuoteRequest A Callback
Carbon Steel Instrumentation Ball Valves

Carbon Steel Instrumentation Ball Valves

Product Price: Rs 200 / PieceGet Best Price

Product Details:
BrandMPJ
Size1"
Temperature Of MediaMax. 400 Degree C
End Connection TypeScrewed NPT
MaterialCopper Steel
Pressure rating6000 psi (413 bar)
StandardASTM

M P Jain Tubing Solutions is a renowned exporter, manufacturer, supplier of  Carbon Steel Instrumentation Ball Valves. We stock all type of ferrous and non-ferrous types of instrumentation ball valves in various standards, specifications, designations, and custom dimensions. Carbon Steel Instrumentation Ball Valves are the most significant viable valves. It has an increased number of carbon amounts that improves strength and hardness that furnish its hardenability properties. It is from the family of steel that contains 2% carbon. It is the martensite in nature that improves weldability. It is the form of an alloy having the property made up of addition of alloying elements.

 

Carbon Steel Top Entry Ball Valves, Carbon Steel Flanged Ball Valve, Carbon Steel Trunnion Ball Valve Exporters, Carbon Steel Encapsulated instrumentation Ball Valve, Carbon Three-piece Ball Valves, Carbon Steel Single-piece Ball Valve, Carbon Steel Swing Out Ball Valves, Carbon Steel Lined Ball Valves, Carbon Steel High Pressure Instrumentation Ball Valves, Carbon Two-piece Ball Valves, Carbon Steel Rising Stem Ball Valves, Carbon Floating Ball Valves Supplier in Mumbai, India.


Carbon Steel Manifold valve Chemical Properties:

Grade

C 

Si

Mn

P

S

Cr

Carbon Steel A105

0.35

0.10-0.35

0.60-1.05

0.035

0.040

0.30




Additional Information:

  • Packaging Details: Carbon Steel Ball Valves are surface wash and clean to remove all impurities and stock in the warehouse. Then it is wrapped in thin plastic and also it ends are protected by plastic caps to avoid any damage in transit. Carbon Steel Ball Valves is bundled in bubble wrap followed by assorting them in colored plastic bundles. An outer rope is tied to protect the tubing and they are packed in wooden box or container. M P Jain Provide Carbon Steel Ball Valves with all necessary documents such as commercial invoice, packing list, Test Reports, HS Code, Country of Origin attested by the chamber of commerce, Fumigation Certificate, Warranty Letter, and Base Material Certificates. Every lot is supplied with a material test certificate as per EN 10204 NACE 3.1 standards indicating the chemical and mechanical properties of the Instrumentation Tubes. We also confirm the guarantee of the Carbon Steel Ball Valves supplied as per Purchase order specifications and attest the same in the Material Test Certificate. We also welcome any third party inspection from an agency nominated by the customer to comply with NACE 3.2 Certification if required by the customer at an extra cost.
Get Best QuoteRequest A Callback
SMO 254 Manifold Valves

SMO 254 Manifold Valves

Product Price: Rs 150 / PCSGet Best Price

Product Details:
Usage/ApplicationAutomobile
Pressure6000 psig @ 100 Degree F (414 barg @ 38 Degree C).
Size1"
BrandMPJ
MaterialSS
Material GradeSMO 254
Temperature1200 Degree F(648 Degree C)

M P Jain Tubing Solutions is acknowledged and the most reliable industry in the market that offers high quality of SMO 254 manifold valves to their customers. They are engaged in offering great services on their fabricated valves such as high end finishing, accurate dimensions and sleek designing of the products. 254 SMO is a grade type of Stainless Steel and it is an extremely high austenitic type of Stainless Steel. It has significant levels of chromium, molybdenum and nitrogen, subsequently, it is particularly appropriate suited for high chloride environments for example, seawater, beach plants and other process streams. 254 SMO is broadly regarded has a cost-effective and perfect substitute for nickel and titanium alloys. The grade which is profoundly utilized by the industry is SMO 254 in the fabrication of the high quality of valves. The SMO 254 valves exhibits excellent corrosion resistance, high pitting resistance to chloride environment, great crevice corrosion resistance and excellent strength at high temperature and pressure environment are some of the properties. The offered valves are available with different resistance restricts and machining allowance in order to fit in various sorts of utilizations. It has the chromium content that offers extraordinary protection from different natural and inorganic mixes, for example, chlorides, phosphoric acids, sulfides, sulfuric acids, nitric acids, alkalis, etc.


SMO 254 Globe Valves, SMO 1.4547 Trunnion Mounted Ball Valves, UNS S31254 Cryogenic Valves, SMO 254 Vane Valve, DIN 1.4547 Hygienic Ball Valves Exporter, SMO 254 Diaphragm Valves, 254 SMO Plug Valve Manufacturer in India.


SMO 254 Manifold Valves Equivalent Grades:

STANDARD

UNS

WERKSTOFF NR.

AFNOR

SIS

GOST

EN

SMO 254

S31254

1.4547

Z1 CNDU 20.18.06Az

2378

-

X1CrNiMoCuN20-18-7


SMO 254 Manifold Valves Chemical Composition:

Grade

C

Ni

Si

N

S

Mn

P

Cr

SMO 254

≤0.020

0.20

≤0.80

0.20

≤0.010

≤1.00

≤0.030

20


SMO 254 Manifold Valves Mechanical Properties:

Standard

Tensile Strength (MPa) min

Elongation (% in 50mm) min

Yield Strength 0.2% Proof (MPa) min

SMO 254

650

35

300



Additional Information:

  • Packaging Details: SMO 254 Valve are surface wash and clean to remove all impurities and stock in the warehouse. Then it is wrapped in thin plastic and also it ends are protected by plastic caps to avoid any damage in transit. SMO 254 Valve is bundled in bubble wrap followed by assorting them in colored plastic bundles. An outer rope is tied to protect the tubing and they are packed in wooden box or container. M P Jain Provide SMO 254 Valve with all necessary documents such as commercial invoice, packing list, Test Reports, HS Code, Country of Origin attested by the chamber of commerce, Fumigation Certificate, Warranty Letter, and Base Material Certificates. Every lot is supplied with a material test certificate as per EN 10204 NACE 3.1 standards indicating the chemical and mechanical properties of the Instrumentation Tubes. We also confirm the guarantee of the SMO 254 Valve supplied as per Purchase order specifications and attest the same in the Material Test Certificate. We also welcome any third party inspection from an agency nominated by the customer to comply with NACE 3.2 Certification if required by the customer at an extra cost.
Get Best QuoteRequest A Callback

EXPLORE MORE CATEGORIES

Contact Us
 
Thank youYour Enquiry has been sent successfully.
© M P Jain Tubing Solutions LLP. All Rights Reserved (Terms of Use)Developed and managed by IndiaMART InterMESH Ltd.