Call 08048600090 86% Response Rate

Send Email

Round Bars

We are a leading Manufacturer of ss 316h round bar, ss 304l round bar, ss 304h round bar, stainless steel 310h round bar, ss 316l round bar and ss 316ti round bars from Mumbai, India.
SS 316H Round Bar

SS 316H Round Bar

Product Price: Rs 450 / PieceGet Best Price

Product Details:
Material GradeSS 316H
ShapeRound
Usage/ApplicationChemical Equipment
BrandMPJ
Material StandardASTM A276
MaterialStainless Steel
Single Piece Length18 meter

This Stainless Steel 316H Round Bar is actually austenitic stainless steel which bears molybdenum as one of its constituents. The content of nickel and molybdenum in this grade are higher due to which is shows increased resistance to corrosion. It shows resistance to crevice as well as pitting corrosion in the chloride milieus. Stainless Steel 316H Rods (SS 316H Rods) offers enhanced weldability and as well reduces the prospect of lower corrosion resistance across the welded areas. With respect to national and international quality of raw materials, we also offer these UNS S31609 Round Bars in customized sizes and thicknesses as per specific demands by our esteemed clients at market leading prices. These 316h bars are known for their long lives, excellent quality, optimum performance, economical rates, dimensional accuracy, durability, corrosion resistance and excellent finish.

 

SS UNS S31609 Round Bar Chemical Composition:

316H

Max

Min

Ni

14.0

10.0

C

0.08

-

Mn

2.00

-

P

0.045

-

S

0.03

-

Si

0.75

-

Cr

18.0

16.0

Mo

3.00

2.00

N

0.10

-


316H Stainless Steel Round Bar Mechanical Properties:

Element

SS 316H

Density

8.0 g/cm3

Melting Point

1400 °C (2550 °F)

Tensile Strength

485 Min

Yield Strength (0.2%Offset)

170 Min.

Elongation

40% Min

Hardness (Brinell)

217 Max.




Additional Information:

  • Packaging Details: Stainless Steel 316H Round Bar are surface wash and clean to remove all impurities and stock in the warehouse. Then it is wrapped in thin plastic and also it ends are protected by plastic caps to avoid any damage in transit. Stainless Steel 316H Round Bar is bundled in bubble wrap followed by assorting them in colored plastic bundles. An outer rope is tied to protect the tubing and they are packed in wooden box or container. M P Jain Provide Stainless Steel 316H Round Bar with all necessary documents such as commercial invoice, packing list, Test Reports, HS Code, Country of Origin attested by the chamber of commerce, Fumigation Certificate, Warranty Letter, and Base Material Certificates. Every lot is supplied with a material test certificate as per EN 10204 NACE 3.1 standards indicating the chemical and mechanical properties of the Instrumentation Tubes. We also confirm the guarantee of the Stainless Steel 316H Round Bar supplied as per Purchase order specifications and attest the same in the Material Test Certificate. We also welcome any third party inspection from an agency nominated by the customer to comply with NACE 3.2 Certification if required by the customer at an extra cost.
Get Best Quote Request Callback
SS 304L Round Bar

SS 304L Round Bar

Product Price: Rs 360 / PieceGet Best Price

Product Details:
Material GradeSS 304L
ShapeRound
Usage/ApplicationHeat Exchangers
Single Piece Length6 meter
BrandMPJ
FinishPolished
Material StandardASTM A276
MaterialStainless Steel

Grade 304L Round Bar resists atmospheric corrosion and moderate in oxidizing and reducing the environment. This alloy has excellent resistance to intergranular corrosion. This alloy is non-magnetic in the annealed condition but some time magnetic as a result of cold working and welding also used in shop fabrication practice. We offer Stainless Steel 304L Rods in different dimensions such as sizes, shape, and thickness. These rods are performing in many fields. The working of this alloy is highly recommended for the hot working process. This alloy increases the property during cold working operations and it gives quite magnetic property.


Chemical Composition of Stainless Steel Grade 304L:

Grade

C

Mn

Si

P

S

Cr

Ni

SS 304L

0.035 max

2.0 max

1.0 max

0.045 max

0.03 max

18 – 20

8 – 13


Mechanical Properties of SS 304L Round Bar:

Density

Melting Point

Tensile Strength

Yield Strength (0.2%Offset)

Elongation

8.0 g/cm3

1400 °C (2550 °F)

Psi – 75000 , MPa – 515

Psi – 30000 , MPa – 205

35 %



Additional Information:

  • Packaging Details: 304L Stainless Steel Round Bar are surface wash and clean to remove all impurities and stock in the warehouse. Then it is wrapped in thin plastic and also it ends are protected by plastic caps to avoid any damage in transit. 304L Stainless Steel Round Bar is bundled in bubble wrap followed by assorting them in colored plastic bundles. An outer rope is tied to protect the tubing and they are packed in wooden box or container. M P Jain Provide 304L Stainless Steel Round Bar with all necessary documents such as commercial invoice, packing list, Test Reports, HS Code, Country of Origin attested by the chamber of commerce, Fumigation Certificate, Warranty Letter, and Base Material Certificates. Every lot is supplied with a material test certificate as per EN 10204 NACE 3.1 standards indicating the chemical and mechanical properties of the Instrumentation Tubes. We also confirm the guarantee of the 304L Stainless Steel Round Bar supplied as per Purchase order specifications and attest the same in the Material Test Certificate. We also welcome any third party inspection from an agency nominated by the customer to comply with NACE 3.2 Certification if required by the customer at an extra cost.
Get Best Quote Request Callback
SS 304H Round Bar

SS 304H Round Bar

Product Price: Rs 550 / PieceGet Best Price

Product Details:
Material GradeSS 304H
ShapeRound
Usage/ApplicationOil & Gas Exploration
Single Piece Length6 meter
BrandMPJ
FinishPolished
MaterialStainless Steel
Country of OriginMade in India

M P Jain Tubing Solution is the reliable and trustworthy manufacturer that today has got greater popularity among the large numbers of the industrialist. Stainless steel 304H round bar is having high carbon content that is making the steel highly suitable for use in the applications wherein the elevated temperature is present. It is the austenitic nickel and chromium alloying elements based steel alloy and the high carbon content is delivering increased yielding and tensile strength. This material is recommended for the use in the ASME pressure vessels into the working service temperature ranging 525 Deg C because of heat resistant properties. This alloy is having a very good long term and short term creep strength. Stainless steel 304H alloy is found commonly used in the heat exchangers, industrial boilers, etc. AISI 304H Stainless steel Round bars that we are providing to the buyers are varying differently in dimensions, specifications, sizes, etc. The product that we provide to the buyers is used in applications like refineries, sugar industry, textile industry, chemical industries, etc. 


As our offered ranges of AISI 304H Stainless steel Round bars are having many good properties to offer the demand of it automatically has got increased.

Some properties found in it are like:

  • Sensitization resistant
  • Excellent general corrosion resistant
  • Ease of fabrication
  • Good formability
  • High tensile strength
  • Rugged construction
  • Anti-corrosive body
  • Long service life
  • Holds high temperature
  • Good dimensional accuracy
  • Smoothness in surface finishes

 

Mechanical Properties of SS 304H / UNS S30409 / 1.4301 / SUS 304H Round Bar:

Density

Melting Point

Tensile Strength

Yield Strength (0.2%Offset)

Elongation

8.0 g/cm3

1400 °C (2550 °F)

Psi – 75000 , MPa – 515

Psi – 30000 , MPa – 205

35 %




Additional Information:

  • Packaging Details: 304H Stainless Steel Round Bar are surface wash and clean to remove all impurities and stock in the warehouse. Then it is wrapped in thin plastic and also it ends are protected by plastic caps to avoid any damage in transit. 304H Stainless Steel Round Bar is bundled in bubble wrap followed by assorting them in colored plastic bundles. An outer rope is tied to protect the tubing and they are packed in wooden box or container. M P Jain Provide 304H Stainless Steel Round Bar with all necessary documents such as commercial invoice, packing list, Test Reports, HS Code, Country of Origin attested by the chamber of commerce, Fumigation Certificate, Warranty Letter, and Base Material Certificates. Every lot is supplied with a material test certificate as per EN 10204 NACE 3.1 standards indicating the chemical and mechanical properties of the Instrumentation Tubes. We also confirm the guarantee of the 304H Stainless Steel Round Bar supplied as per Purchase order specifications and attest the same in the Material Test Certificate. We also welcome any third party inspection from an agency nominated by the customer to comply with NACE 3.2 Certification if required by the customer at an extra cost.
Get Best Quote Request Callback
Stainless Steel 310H Round Bar

Stainless Steel 310H Round Bar

Product Price: Rs 365 / PieceGet Best Price

Product Details:
Material GradeSS 310H
ShapeRound
Usage/ApplicationIndustrial Equipment Utilities
Single Piece Length6 meter
BrandMPJ
MaterialStainless Steel
Country of OriginMade in India
StandardsASTM A479

310H Round Bar are highly demanded due to their dimensional accuracy, durability, corrosion resistance and excellent finish. Due to their high chromium and nickel content, SS 310H Round Bars are highly corrosion resistant, have outstanding resistance to oxidation, and excellent heat resistance while providing good strength at room and elevated temperatures. SS 310H Round Bars are used for various applications such as Baskets and trays, Boiler baffles, Burner parts, Fans, Fire box sheets, Furnace components, Furnace parts such as conveyor belts and rollers, Oven linings, Retorts, Refractory supports and more. Also known as UNS S31009, these Stainless Steel 310H Round Bars is considered the most versatile, most widely used, and is available in more forms and finishes than any other grade of stainless steel.


Chemical Composition of Stainless Steel 310H Round Bars:

Grade

C

Mn

Si

P

S

Cr

Mo

Ni

N

310H

min.

0.04

-

-

-

-

24.0

-

19.0

-

max.

0.10

2.00

1.00

0.045

0.030

26.0

21.0


Mechanical Properties of Stainless Steel 310H Round Bars:

Grade

Tensile Strength (MPa) min

Yield Strength 0.2% Proof (MPa) min

Elongation (% in 50mm) min

Hardness

Rockwell B (HR B) max

Brinell (HB) max

310H

515

205

40

95

21



Additional Information:

  • Packaging Details: Stainless Steel 310H Round Bar are surface wash and clean to remove all impurities and stock in the warehouse. Then it is wrapped in thin plastic and also it ends are protected by plastic caps to avoid any damage in transit. Stainless Steel 310H Round Bar is bundled in bubble wrap followed by assorting them in colored plastic bundles. An outer rope is tied to protect the tubing and they are packed in wooden box or container. M P Jain Provide Stainless Steel 310H Round Bar with all necessary documents such as commercial invoice, packing list, Test Reports, HS Code, Country of Origin attested by the chamber of commerce, Fumigation Certificate, Warranty Letter, and Base Material Certificates. Every lot is supplied with a material test certificate as per EN 10204 NACE 3.1 standards indicating the chemical and mechanical properties of the Instrumentation Tubes. We also confirm the guarantee of the Stainless Steel 310H Round Bar supplied as per Purchase order specifications and attest the same in the Material Test Certificate. We also welcome any third party inspection from an agency nominated by the customer to comply with NACE 3.2 Certification if required by the customer at an extra cost.
Get Best Quote Request Callback
SS 316L Round Bar

SS 316L Round Bar

Product Price: Rs 350 / PieceGet Best Price

Product Details:
Material GradeSS 316L
ShapeRound
Usage/ApplicationOil & Gas Exploration
BrandMPJ
Material StandardASTM A276
MaterialStainless Steel
TechniqueHot Rolled
Thickness/Diameter350 mm

SS 316L is the molybdenum-bearing austenitic SS. The high nickel and molybdenum content in this alloy is allowing it in demonstrating very good corrosion resistant properties than other alloys. It is having resistant ability against crevice corrosion and pitting in the chloride atmosphere. Additionally, this SS 316L Round Bar is providing very good tensile strength at the elevated temperature, stress-rupture, and creep-rupture properties as well as very good weldability and formability.


Grade 316L, the low carbon version of 316 and is immune from sensitisation (grain boundary carbide precipitation). Thus it is extensively used in heavy gauge welded components (over about 6mm). The austenitic structure also gives these grades excellent toughness, even down to cryogenic temperatures.

It is the preferred steel for use in marine environments because of its greater resistance to pitting corrosion than other grades of steel. The fact that it is negligibly responsive to magnetic fields means that it can be used in applications where a non-magnetic metal is required. In addition to molybdenum, 316L also contains a number of other elements in varying concentrations.

Diameter Range:

  • 3.17 to 350 mm

Chemical Composition of Stainless Steel Grade 316L bar:

Grade

C

Mn

Si

P

S

Cr

Mo

Ni

Fe

SS 316L

0.035 max

2.0 max

1.0 max

0.045 max

0.03 max

16 – 18

2.00 - 3.00

10.00 - 14.00

-


Mechanical Properties of SS 316/316L Round Bar:

Density

Melting Point

Tensile Strength

Yield Strength (0.2%Offset)

Elongation

8.0 g/cm3

1400 °C (2550 °F)

Psi – 75000 , MPa – 515

Psi – 30000 , MPa – 205

35 %



Additional Information:

  • Packaging Details: Stainless Steel 316L Round Bar are surface wash and clean to remove all impurities and stock in the warehouse. Then it is wrapped in thin plastic and also it ends are protected by plastic caps to avoid any damage in transit. Stainless Steel 316L Round Bar is bundled in bubble wrap followed by assorting them in colored plastic bundles. An outer rope is tied to protect the tubing and they are packed in wooden box or container. M P Jain Provide Stainless Steel 316L Round Bar with all necessary documents such as commercial invoice, packing list, Test Reports, HS Code, Country of Origin attested by the chamber of commerce, Fumigation Certificate, Warranty Letter, and Base Material Certificates. Every lot is supplied with a material test certificate as per EN 10204 NACE 3.1 standards indicating the chemical and mechanical properties of the Instrumentation Tubes. We also confirm the guarantee of the Stainless Steel 316L Round Bar supplied as per Purchase order specifications and attest the same in the Material Test Certificate. We also welcome any third party inspection from an agency nominated by the customer to comply with NACE 3.2 Certification if required by the customer at an extra cost
Get Best Quote Request Callback
SS 316Ti Round Bars

SS 316Ti Round Bars

Product Price: Rs 550 / PieceGet Best Price

Product Details:
Material GradeSS 316Ti
BrandMPJ
Usage/ApplicationWater Equipment
Single Piece Length6 meter
Size800mm
Material StandardASTM A276
MaterialStainless Steel
ShapeRound

Stainless steel 316ti round bars (uns s31635) is titanium stabilized version of 316 grade bars. These are composed of molybdenum-bearing austenitic stainless steel. Alloy 316 ti is known as din number 1.4571. These are more resistance to general, pitting and crevice corrosion than standard nickel and chromium austenitic ss. These have many properties such as stress rupture strength, higher creep, and tensile strength. These round bars can be susceptible to sensitization or grain boundary precipitation. The surface resists grain boundary carbide precipitation at temperatures between 900- 1500 deg f which can result in instant corrosion resistance. The resistance to sensitization is achieved by the addition of titanium that stabilized structure against chromium carbide precipitation. This property is achieved by heating the products in cyclic temperatures. It reduces the susceptibility of alloy and it can be used in long exposure at higher temperatures. Like other standard grades, it offers excellent resistance to local and general corrosion.


Size Range:

  • 3-800 mm


SS 316Ti Round Bar Equivalent Grades:

STANDARD

WERKSTOFF NR.

UNS

JIS

BS

GOST

AFNOR

SS 316Ti

1.4571

S31635

SUS 316Ti

320S31

08Ch17N13M2T

Z6CNDT17-123



Additional Information:

  • Packaging Details: Stainless Steel 316Ti Round Bar are surface wash and clean to remove all impurities and stock in the warehouse. Then it is wrapped in thin plastic and also it ends are protected by plastic caps to avoid any damage in transit. Stainless Steel 316Ti Round Bar is bundled in bubble wrap followed by assorting them in colored plastic bundles. An outer rope is tied to protect the tubing and they are packed in wooden box or container. M P Jain Provide Stainless Steel 316Ti Round Bar with all necessary documents such as commercial invoice, packing list, Test Reports, HS Code, Country of Origin attested by the chamber of commerce, Fumigation Certificate, Warranty Letter, and Base Material Certificates. Every lot is supplied with a material test certificate as per EN 10204 NACE 3.1 standards indicating the chemical and mechanical properties of the Instrumentation Tubes. We also confirm the guarantee of the Stainless Steel 316Ti Round Bar supplied as per Purchase order specifications and attest the same in the Material Test Certificate. We also welcome any third party inspection from an agency nominated by the customer to comply with NACE 3.2 Certification if required by the customer at an extra cost.
Get Best Quote Request Callback
SS 317L Round Bar

SS 317L Round Bar

Product Price: Rs 450 / PieceGet Best Price

Product Details:
Material GradeSS317L
Size60 inch
ShapeRound
Usage/ApplicationOil & Gas Exploration
Single Piece Length6 meter
BrandMPJ
Material StandardEN
MaterialStainless Steel

Alloy 317/ 317L is a molybdenum-containing austenitic SS with an increased amount of chromium, nickel, and molybdenum. These are available in two variants lower a higher carbon version. 317L is lower carbon version also known as UNS 31703. The lower amount of carbon provides resistance to sensitization or other thermal operations. This composition increases the resistance to chemical reduction such as acetic acid, formic acid, citric acid, tartaric acid and more.

Due to the lower carbon amount stress to rupture, high tensile strength elevated temperatures is increased. The structure of grade is non-magnetic in nature when it is annealed, but it changes to magnetic when it is exposed to the welding process.


Equivalent Stainless Steel of Grades 317/317L SS Bars:

STANDARD

WERKSTOFF NR.

UNS

JIS

EN

SS 317

1.4449

S31700

SUS 317

-

SS 317L

1.4438

S31703

SUS 317L

X2CrNiMo18-15-4


Chemical Composition of ASTM A276 SS 317/317L Bars:

Grade

C

Mn

Si

P

S

Cr

Mo

Ni

Fe

SS 317

0.08 max

2.0 max

1.0 max

0.045 max

0.030 max

18.00 - 20.00

3.00 - 4.00

11.00 - 15.00

57.845 min

SS 317L

0.035 max

2.0 max

1.0 max

0.045 max

0.030 max

18.00 - 20.00

3.00 - 4.00

11.00 - 15.00

57.89 min

 

Mechanical Properties of Stainless Steel 317/317L Round Bar:

Density

Melting Point

Tensile Strength

Yield Strength (0.2%Offset)

Elongation

7.9 g/cm3

1400 °C (2550 °F)

Psi – 75000 , MPa – 515

Psi – 30000 , MPa – 205

35 %




Additional Information:

  • Packaging Details: Stainless Steel 317/317L Round Bar are surface wash and clean to remove all impurities and stock in the warehouse. Then it is wrapped in thin plastic and also it ends are protected by plastic caps to avoid any damage in transit. Stainless Steel 317/317L Round Bar is bundled in bubble wrap followed by assorting them in colored plastic bundles. An outer rope is tied to protect the tubing and they are packed in wooden box or container. M P Jain Provide Stainless Steel 317/317L Round Bar with all necessary documents such as commercial invoice, packing list, Test Reports, HS Code, Country of Origin attested by the chamber of commerce, Fumigation Certificate, Warranty Letter, and Base Material Certificates. Every lot is supplied with a material test certificate as per EN 10204 NACE 3.1 standards indicating the chemical and mechanical properties of the Instrumentation Tubes. We also confirm the guarantee of the Stainless Steel 317/317L Round Bar supplied as per Purchase order specifications and attest the same in the Material Test Certificate. We also welcome any third party inspection from an agency nominated by the customer to comply with NACE 3.2 Certification if required by the customer at an extra cost.
Get Best Quote Request Callback
Smo 254 Round Bar

Smo 254 Round Bar

Product Price: Rs 275 / PieceGet Best Price

Product Details:
Size350 mm
ShapeRound
Usage/ApplicationOil & Gas Exploration
Single Piece Length6 meter
BrandMPJ
FinishPolished
Material GradeSMO 254

A high pitting resistance number indicates that the stainless steel grade has a high resistance to localized corrosion like pitting. The stainless steel is considered to be a very high end grade due to its higher strength as compared to other conventional austenitic stainless steel grades. The SMO UNS S31254 Bar has good weldable properties.


SMO 254 Round Bar is mainly comprised of 19.5% and 20.5% chromium, 17.5% to 18.5% nickel, 6% to 6.5% molybdenum like standard austenitic stainless steel grades. But unlike convention austenitic stainless steel grades, the UNS S31254 Bar contains about 0.18% to 0.22% nitrogen. The specific levels of Chromium, Nickel, Molybdenum and Nitrogen in its super austenitic 1.4547 Round Bar chemical makeup allows the SMO 254 Bar to combine its impact toughness resistance to corrosion cracking, with pitting and crevice corrosion resistance. The result is strength of the 254 SMO Bar nearly twice that of 300 series stainless steels.


The UNS S31254 or the SMO 254 Round Bar is often referred to as a “6% Moly” grade due to the content of molybdenum. The 254 SMO Round Bar has the ability to withstand high temperatures while maintaining its high strength under volatile conditions. This grade is used successfully in various applications such as Flue gas desulfurization and Chemical environments.


SMO 254 Round Bars Equivalent Grades:

STANDARD

UNS

WERKSTOFF NR.

EN

AFNOR

SIS

SMO 254

S31254

1.4547

X1CrNiMoCuN20-18-7

Z1 CNDU 20.18.06Az

2378



Additional Information:

  • Packaging Details: SMO 254 Round Bar are surface wash and clean to remove all impurities and stock in the warehouse. Then it is wrapped in thin plastic and also it ends are protected by plastic caps to avoid any damage in transit. SMO 254 Round Bar is bundled in bubble wrap followed by assorting them in colored plastic bundles. An outer rope is tied to protect the tubing and they are packed in wooden box or container. M P Jain Provide SMO 254 Round Bar with all necessary documents such as commercial invoice, packing list, Test Reports, HS Code, Country of Origin attested by the chamber of commerce, Fumigation Certificate, Warranty Letter, and Base Material Certificates. Every lot is supplied with a material test certificate as per EN 10204 NACE 3.1 standards indicating the chemical and mechanical properties of the Instrumentation Tubes. We also confirm the guarantee of the SMO 254 Round Bar supplied as per Purchase order specifications and attest the same in the Material Test Certificate. We also welcome any third party inspection from an agency nominated by the customer to comply with NACE 3.2 Certification if required by the customer at an extra cost.
Get Best Quote Request Callback
SS 347 Round Bar

SS 347 Round Bar

Product Price: Rs 120 / PieceGet Best Price

Product Details:
Size300mm
Country of OriginMade in India
BrandMPJ
MaterialStainless Steel
Material GradeSS347
ShapeRound
Surface FinishedPolished

Alloy 347 is a balanced, austenitic, chromium steel containing columbium which takes into consideration the end of carbide precipitation, and thus intergranular corrosion.


Alloy 347 is balanced out by the increases of chromium and tantalum and offers higher creep and stress rupture properties than alloy 304 and 304L, which may also be utilized for exposures where sensitization and intergranular corrosion are of concern. The expansion of columbium likewise permits Alloy 347 to have outstanding corrosion resistance, better than that of alloy 321. Alloy 347H is the higher carbon composition form of Alloy 347and display enhanced high temperature and creep properties.


Characteristics:

  • Higher creep stress and rupture properties when compared with 304
  • Ideal for high temperature service
  • Overcomes sensitization and intergranular corrosion concerns
  • Can be used in elevated temperature applications
  • Due to stabilisation the material offers better overall corrosion resistance when compared to 304/304L


Applications:

  • Food Processing equipment and storage
  • Petroleum Refining fluid catalytic cracking units, polyphonic acid service
  • Pharmaceutical Production
  • Waste Heat Recovery recuperates
  • Chemical Processing


Additional Information:

  • Packaging Details: Stainless Steel 347/347H Round Bar are surface wash and clean to remove all impurities and stock in the warehouse. Then it is wrapped in thin plastic and also it ends are protected by plastic caps to avoid any damage in transit. Stainless Steel 347/347H Round Bar is bundled in bubble wrap followed by assorting them in colored plastic bundles. An outer rope is tied to protect the tubing and they are packed in wooden box or container. M P Jain Provide Stainless Steel 347/347H Round Bar with all necessary documents such as commercial invoice, packing list, Test Reports, HS Code, Country of Origin attested by the chamber of commerce, Fumigation Certificate, Warranty Letter, and Base Material Certificates. Every lot is supplied with a material test certificate as per EN 10204 NACE 3.1 standards indicating the chemical and mechanical properties of the Instrumentation Tubes. We also confirm the guarantee of the Stainless Steel 347/347H Round Bar supplied as per Purchase order specifications and attest the same in the Material Test Certificate. We also welcome any third party inspection from an agency nominated by the customer to comply with NACE 3.2 Certification if required by the customer at an extra cost.
Get Best Quote Request Callback
SS 310S Round Bars

SS 310S Round Bars

Product Price: Rs 350 / PieceGet Best Price

Product Details:
Material GradeSS 310S
ShapeRound
Usage/ApplicationPharmaceuticals Pharmaceutical Equipment
BrandMPJ
Material StandardDIN
MaterialStainless Steel
Country of OriginMade in India
Single Piece Length18 meter
Thickness/Diameter60 mm
FinishPolished

Day by day the demand for Stainless steel 310S Round bars is increasing in the global market and is used widely in many industrial applications. Seeing the high rise in its demand the numbers of enterprises have taken their space into the market and is dealing at a global scale in making and offering the wide comprehensive ranges of round bars. These bars are austenitic nickel and chromium SS that is having a very good oxidation resistance ability. These bars are resistant to high heat at incessant services and also it is resistance to the carburizing and reducing atmospheres.

 

The chemical composition of Stainless Steel 310s Round Bar:

Grade

C

Mn

Si

P

S

Cr

Mo

Ni

N

310S

min.
max.

-
0.08

-
2.00

-
1.50

-
0.045

-
0.030

24.0
26.0

-

19.0
22.0

-

 

The mechanical properties of 310S Round Bar:

Grade

Tensile Strength (MPa) min

Yield Strength 0.2% Proof (MPa) min

Elongation (% in 50mm) min

Hardness

Rockwell B (HR B) max

Brinell (HB)
max

310S

515

205

40

95

217




Additional Information:

  • Packaging Details: Stainless Steel 310S Round Bar are surface wash and clean to remove all impurities and stock in the warehouse. Then it is wrapped in thin plastic and also it ends are protected by plastic caps to avoid any damage in transit. Stainless Steel 310S Round Bar is bundled in bubble wrap followed by assorting them in colored plastic bundles. An outer rope is tied to protect the tubing and they are packed in wooden box or container. M P Jain Provide Stainless Steel 310S Round Bar with all necessary documents such as commercial invoice, packing list, Test Reports, HS Code, Country of Origin attested by the chamber of commerce, Fumigation Certificate, Warranty Letter, and Base Material Certificates. Every lot is supplied with a material test certificate as per EN 10204 NACE 3.1 standards indicating the chemical and mechanical properties of the Instrumentation Tubes. We also confirm the guarantee of the Stainless Steel 310S Round Bar supplied as per Purchase order specifications and attest the same in the Material Test Certificate. We also welcome any third party inspection from an agency nominated by the customer to comply with NACE 3.2 Certification if required by the customer at an extra cost.
Get Best Quote Request Callback
Hastelloy C276 Round Bars

Hastelloy C276 Round Bars

Product Price: Rs 500 / PieceGet Best Price

Product Details:
BrandMPJ
ShapeRound
Usage/ApplicationSpecialty Chemicals Industry
Material GradeHastelloy C276
Material StandardASTM
Size120 mm
MaterialHastelloy

Hastelloy C276, also known as Alloy C276 or UNS N10276 is an austenitic grade alloy. The base constituent of Hastelloy C276 Round Bar alloy is chemically composed of three elements, which are nickel, molybdenum and chromium.  This alloy chemically consists of elements like nickel, molybdenum & chromium as its primary alloying material along with a small addition of tungsten. Hastelloy c276 welding rod is considered to be one of the premier corrosion resistant materials available for process industries in the market. This wrought Haynes Alloy C276 Bar is generally considered to be a versatile, yet corrosion resistant alloy. One of the benefits of using the Hastelloy C276 rod is its excellent resistance to corrosion in both oxidizing as well as reducing environments. 


Chemical Properties of Hastelloy C276:

Grade

C

Si

Mn

P

S

Cr

Mo

Ni

N

C276

0.01

0.08

1.0

0.04

0.03

14.5 - 16.5

15 - 17

Bal

Bal

 

Mechanical Properties of Hastelloy C276:

Density

Melting Point

Tensile Strength

Yield Strength (0.2%Offset)

Elongation

8.89 g/cm3

1370 °C (2550 °F)

Psi – 1,15,000 , MPa –790

Psi – 52,000 , MPa – 355

40 %




Additional Information:

  • Packaging Details: Hastelloy C276 Round Bar are surface wash and clean to remove all impurities and stock in the warehouse. Then it is wrapped in thin plastic and also it ends are protected by plastic caps to avoid any damage in transit. Hastelloy C276 Round Bar is bundled in bubble wrap followed by assorting them in colored plastic bundles. An outer rope is tied to protect the tubing and they are packed in wooden box or container. M P Jain Provide Hastelloy C276 Round Bar with all necessary documents such as commercial invoice, packing list, Test Reports, HS Code, Country of Origin attested by the chamber of commerce, Fumigation Certificate, Warranty Letter, and Base Material Certificates. Every lot is supplied with a material test certificate as per EN 10204 NACE 3.1 standards indicating the chemical and mechanical properties of the Instrumentation Tubes. We also confirm the guarantee of the Hastelloy C276 Round Bar supplied as per Purchase order specifications and attest the same in the Material Test Certificate. We also welcome any third party inspection from an agency nominated by the customer to comply with NACE 3.2 Certification if required by the customer at an extra cost.
Get Best Quote Request Callback
SS 304 Round Bars

SS 304 Round Bars

Product Price: Rs 350 / PieceGet Best Price

Product Details:
ShapeRound
Usage/ApplicationOil & Gas Exploration
BrandMPJ
MaterialStainless Steel
GradeSS 304
Unit Length6 m
StandardASTM A479
FinishBA Finish

As an acclaimed enterprise of the industry, M P Jain Tubing Solution is involved in offering a vast array of Stainless Steel 304 Round Bars (SS 304 Round Bars) as a manufacturer, exporter, stockiest and supplier to our domestic and global clients. Stainless Steel 304 Bars is austenitic steel by means of having non-magnetic features in the annealed form that offers excellent corrosion resistance to both atmospheric and chemical exposures, in the company of an elevated resistance to oxidation.


Grade 304 Round Bar resists atmospheric corrosion and moderate in oxidizing and reducing the environment. This alloy has excellent resistance to intergranular corrosion. This alloy is non-magnetic in the annealed condition but some time magnetic as a result of cold working and welding also used in shop fabrication practice.

 

304 Stainless Steel Round bar Chemical Composition:

Grade

C

Mn

Si

P

S

Cr

Mo

Ni

N

SS 304

0.08 max

2 max

0.75 max

0.045 max

0.030 max

18 – 20

8 – 11

 

Stainless Steel 304 Rods Mechanical Properties:

Density

Melting Point

Tensile Strength

Yield Strength (0.2%Offset)

Elongation

8.0 g/cm3

1400 °C (2550 °F)

Psi – 75000 , MPa – 515

Psi – 30000 , MPa – 205

35 %

 

Equivalent Grades for 304 Stainless Steel Round Bar:

STANDARD

WERKSTOFF NR.

UNS

JIS

BS

GOST

AFNOR

EN

SS 304

1.4301

S30400

SUS 304

304S31

08??18??10

Z7CN18???09

X5CrNi18-10




Additional Information:

  • Packaging Details: 304 Stainless Steel Round Bar are surface wash and clean to remove all impurities and stock in the warehouse. Then it is wrapped in thin plastic and also it ends are protected by plastic caps to avoid any damage in transit. 304 Stainless Steel Round Bar is bundled in bubble wrap followed by assorting them in colored plastic bundles. An outer rope is tied to protect the tubing and they are packed in wooden box or container. M P Jain Provide 304 Stainless Steel Round Bar with all necessary documents such as commercial invoice, packing list, Test Reports, HS Code, Country of Origin attested by the chamber of commerce, Fumigation Certificate, Warranty Letter, and Base Material Certificates. Every lot is supplied with a material test certificate as per EN 10204 NACE 3.1 standards indicating the chemical and mechanical properties of the Instrumentation Tubes. We also confirm the guarantee of the 304 Stainless Steel Round Bar supplied as per Purchase order specifications and attest the same in the Material Test Certificate. We also welcome any third party inspection from an agency nominated by the customer to comply with NACE 3.2 Certification if required by the customer at an extra cost.
Get Best Quote Request Callback
SS 310 Round Bar

SS 310 Round Bar

Product Price: Rs 500 / PieceGet Best Price

Product Details:
Material GradeSS 310
BrandMPJ
Usage/ApplicationPharmaceuticals Pharmaceutical Equipment
Material StandardASTM A276
ShapeRound
Thickness/Diameter500mm
MaterialStainless Steel
Single Piece Length6 meter

ASTM A276 SS 310 Round Bars are also known as UNS S31000 round bars that are used in various applications and industries worldwide. These stainless steel round bars are produced with the aim to fulfil all the requirements and demands of customers. The producers make use of premium quality of raw material and latest technology. These round bars have excellent oxidation resistance and used for unremitting services. It consists of chromium content which creates superior corrosion resistance that enhances the soaring temperature properties.


Features of stainless steel round bars:

  • Superior corrosion resistance
  • High tensile strength
  • Durability
  • Weldability
  • Formability
  • Accuracy


STM A276 Stainless Steel 310 bar Equivalent Grades:

STANDARD

WERKSTOFF NR.

UNS

JIS

BS

GOST

AFNOR

EN

SS 310

1.4845

S31000

-

-

-

-

-


310 Stainless Steel Round Bar Chemical Composition:

Grade

C

Mn

Si

P

S

Cr

Mo

Ni

N

SS 310

0.25 max

2 max

1.50 max

0.045 max

0.030 max

24 - 26

-

19 - 22

-


310 Stainless Steel Round Bars Mechanical Properties:

Density

Melting Point

Tensile Strength

Yield Strength (0.2%Offset)

Elongation

8.0 g/cm3

1454 °C (2650 °F)

Psi – 75000 , MPa – 515

Psi – 30000 , MPa – 205

35 %



Additional Information:

  • Packaging Details: Stainless Steel 310 Round Bar are surface wash and clean to remove all impurities and stock in the warehouse. Then it is wrapped in thin plastic and also it ends are protected by plastic caps to avoid any damage in transit. Stainless Steel 310 Round Bar is bundled in bubble wrap followed by assorting them in colored plastic bundles. An outer rope is tied to protect the tubing and they are packed in wooden box or container. M P Jain Provide Stainless Steel 310 Round Bar with all necessary documents such as commercial invoice, packing list, Test Reports, HS Code, Country of Origin attested by the chamber of commerce, Fumigation Certificate, Warranty Letter, and Base Material Certificates. Every lot is supplied with a material test certificate as per EN 10204 NACE 3.1 standards indicating the chemical and mechanical properties of the Instrumentation Tubes. We also confirm the guarantee of the Stainless Steel 310 Round Bar supplied as per Purchase order specifications and attest the same in the Material Test Certificate. We also welcome any third party inspection from an agency nominated by the customer to comply with NACE 3.2 Certification if required by the customer at an extra cost.
Get Best Quote Request Callback
SS 316 Round Bars

SS 316 Round Bars

Product Price: Rs 500 / PieceGet Best Price

Product Details:
Material GradeSS 316
ShapeRound
Usage/ApplicationOil & Gas Exploration
BrandMPJ
Thickness/Diameter500mm
FinishBright Polished
MaterialStainless Steel
Country of OriginMade in India

An ISO 9001:2008 Certified Company, M P Jain Tubing Solution is a leading stockholder, supplier and exporter of 316 Stainless Steel Round bar. These 316 Stainless Steel Round bar is a variation of the 18% chromium and 8% nickel austenitic alloy, which is the most familiar and the most frequently used in the stainless steel family. SS 316 Round Bars is a slightly higher carbon version, often found in strip and wire forms. These SS 316 Rods is a tough, ductile grade that demonstrates comparable corrosion resistance, is non-magnetic, and is not hardenable by heat treatment. Also known as UNS S31600, these SS 316 Round Bars are usually used in its annealed condition and have a high ease of fabrication and formability. We offer qualitative Stainless Steel 316 bars in different sizes and shapes that are being designed as per the national and international standard quality of raw materials.

 

SS UNS S31600 Round Bar Chemical Composition:

316

Max

Min

Ni

14.0

10.0

C

0.08

-

Mn

2.00

-

P

0.045

-

S

0.03

-

Si

0.75

-

Cr

18.0

16.0

Mo

3.00

2.00

N

0.10

-




Additional Information:

  • Packaging Details: Stainless Steel 316Round Bar are surface wash and clean to remove all impurities and stock in the warehouse. Then it is wrapped in thin plastic and also it ends are protected by plastic caps to avoid any damage in transit. Stainless Steel 316 Round Bar is bundled in bubble wrap followed by assorting them in colored plastic bundles. An outer rope is tied to protect the tubing and they are packed in wooden box or container. M P Jain Provide Stainless Steel 316 Round Bar with all necessary documents such as commercial invoice, packing list, Test Reports, HS Code, Country of Origin attested by the chamber of commerce, Fumigation Certificate, Warranty Letter, and Base Material Certificates. Every lot is supplied with a material test certificate as per EN 10204 NACE 3.1 standards indicating the chemical and mechanical properties of the Instrumentation Tubes. We also confirm the guarantee of the Stainless Steel 316 Round Bar supplied as per Purchase order specifications and attest the same in the Material Test Certificate. We also welcome any third party inspection from an agency nominated by the customer to comply with NACE 3.2 Certification if required by the customer at an extra cost.
Get Best Quote Request Callback
SS 321 Round Bar

SS 321 Round Bar

Product Price: Rs 450 / PieceGet Best Price

Product Details:
BrandMPJ
MaterialStainless Steel
Material GradeSS 321
Single Piece Length6 meter
Country of OriginMade in India
Thickness/Diameter800mm
TechnicsForged
FinishPickled
ShapeRound

SS 321 Round Bar can be called as an austenitic steel bar. This is available in different sizes, shapes, and grades. It has a low carbon content that makes steel as an ideal raw material. Mostly steel contains a large amount of nickel and chromium. The mixture of nickel and chromium makes it susceptible to warmth treatment. It has a high carbon for better temperature property. Apart from this property, it provides strength and durability. Many elements are used to manufacture this steel but the use of perfect elements makes it more sustainable. 


Stainless Steel 321/321H Round Bar Equivalent Grades:

STANDARD

WERKSTOFF NR.

UNS

SS 321

1.4541

S32100

SS 321H

1.4438

S32109


321/321H SS Round Rod Chemical Composition:

Element

C

Cr

Mn

Ni

P

S

Si

SS 321

0.08 max.

17.0 – 19.0

2.00 max.

9.0-12.0

0.045 max.

0.03 max.

0.75 max.

SS 321H

0.04 – 0.10

17.0 – 19.0

2.00 max.

9.0-12.0

0.045 max.

0.03 max.

0.75 max.


Mechanical Properties of ASME SA 276 Cold Drawing Stainless Steel 321/321H Round Bar:

Density

Melting Point

Tensile Strength

Yield Strength (0.2%Offset)

Elongation

8.0 g/cm3

1457 °C (2650 °F)

Psi – 75000 , MPa – 515

Psi – 30000 , MPa – 205

35 %



Additional Information:

  • Packaging Details: Stainless Steel 321/321H Round Bar are surface wash and clean to remove all impurities and stock in the warehouse. Then it is wrapped in thin plastic and also it ends are protected by plastic caps to avoid any damage in transit. Stainless Steel 321/321H Round Bar is bundled in bubble wrap followed by assorting them in colored plastic bundles. An outer rope is tied to protect the tubing and they are packed in wooden box or container. M P Jain Provide Stainless Steel 321/321H Round Bar with all necessary documents such as commercial invoice, packing list, Test Reports, HS Code, Country of Origin attested by the chamber of commerce, Fumigation Certificate, Warranty Letter, and Base Material Certificates. Every lot is supplied with a material test certificate as per EN 10204 NACE 3.1 standards indicating the chemical and mechanical properties of the Instrumentation Tubes. We also confirm the guarantee of the Stainless Steel 321/321H Round Bar supplied as per Purchase order specifications and attest the same in the Material Test Certificate. We also welcome any third party inspection from an agency nominated by the customer to comply with NACE 3.2 Certification if required by the customer at an extra cost.
Get Best Quote Request Callback
Hastelloy C22 Round Bars

Hastelloy C22 Round Bars

Product Price: Rs 450 / PieceGet Best Price

Product Details:
BrandMPJ
ShapeRound
Usage/ApplicationManufacturing
MaterialHastelloy
Material GradeHastelloy C22
Single Piece Length6000 mm
Country of OriginMade in India
Diameter500 mm

Hastelloy Alloy C22 Bars are used for applications such as Flue gas scrubbers, Chlorination systems, Acid production and pickling systems, and more. As a manufacturer, supplier, stockiest and exporter, we offer these Hastelloy Alloy C22 Round Bars and Rods (also known as UNS N06022 Round Bars) in custom-made sizes and thicknesses as per the exact demands of our esteemed clients. We offer these Hastelloy C22 Bars in international and national quality of standards at cost-effective rates to our patrons. It’s wrought nickel-chromium-molybdenum alloys that also contain tungsten for improved overall corrosion resistance than most other similar alloys. This alloy offers excellent metallurgical stability, resistance to localized corrosion, and is not sensitized during welding or heating.

 

ASTM B574 Hastelloy Alloy C22 Bars Equivalent Grades:

STANDARD

WERKSTOFF NR.

UNS

GOST

AFNOR

JIS

OR

EN

Hastelloy C22

2.4602

N06022

-

-

NW 6022

-

NiCr21Mo14W

 

Hastelloy C22 Round Bar Chemical Composition:

Grade

Ni

C

Cr

Co

Fe

Mn

Mo

P

Si

S

W

V

Hastelloy C22

Bal

0.010 max

20 – 22.5

2.5 max

2 – 6

0.50 max

12.5 – 14.5

0.02 max

0.08 max

0.02 max

2.5 – 3.5

0.35 max

 

Hastelloy C22 Round Bars Mechanical Properties:

Density

Melting Point

Tensile Strength

Yield Strength (0.2%Offset)

Elongation

8.69 g/cm3

1399 °C (2550 °F)

Psi – 1,00,000 , MPa – 690

Psi – 45000 , MPa – 310

45 %


Specifications:
  • Length: 100 mm To 6000 mm Long & Above
  • Diameter: 5 mm To 500 mm


Additional Information:

  • Packaging Details: Hastelloy C22 Round Bar are surface wash and clean to remove all impurities and stock in the warehouse. Then it is wrapped in thin plastic and also it ends are protected by plastic caps to avoid any damage in transit. Hastelloy C22 Round Bar is bundled in bubble wrap followed by assorting them in colored plastic bundles. An outer rope is tied to protect the tubing and they are packed in wooden box or container. M P Jain Provide Hastelloy C22 Round Bar with all necessary documents such as commercial invoice, packing list, Test Reports, HS Code, Country of Origin attested by the chamber of commerce, Fumigation Certificate, Warranty Letter, and Base Material Certificates. Every lot is supplied with a material test certificate as per EN 10204 NACE 3.1 standards indicating the chemical and mechanical properties of the Instrumentation Tubes. We also confirm the guarantee of the Hastelloy C22 47H Round Bar supplied as per Purchase order specifications and attest the same in the Material Test Certificate. We also welcome any third party inspection from an agency nominated by the customer to comply with NACE 3.2 Certification if required by the customer at an extra cost.
Get Best Quote Request Callback
Duplex S31803 Round Bar

Duplex S31803 Round Bar

Product Price: Rs 200 / PieceGet Best Price

Product Details:
Single Piece Length6 meter
BrandMPJ
Usage/ApplicationFood and Dairy Industry
ShapeRound
Size120 mm
MaterialDuplex Steel
GradeDuplex S31803
Material StandardASTM A276

Duplex Steel UNS S31803 round bars are made with a combination between Chromium, Nickel, and Molybdenum with minimal additions of Nitrogen. The brittle micro-constituents of the ASTM A276 Duplex Steel 2205 Round Bars undergo precipitation at temperatures above 300°C. At temperatures below -50°C, the micro-constituents of the Duplex Steel UNS S32205 Round bars are known to undergo ductile-to-brittle transition. They also exhibit excellent corrosion resistance and are known to resist corrosion types like inter-granular, crevice and pitting. The high strength of the Duplex Steel UNS S31803 round bars results in low machinability. The high strength also affects the fabrication of these ASTM A276 Duplex Steel 2205 Round Bars. The Duplex S31803 Round Bar are resistant to chloride stress corrosion cracking up to temperatures of 150°C. The Duplex Steel UNS S32205 Round bars also offer great oxidation properties but this resistivity against oxidation is tarnished by their embrittlement above 300°C.


Applications of the Duplex Steel UNS S31803 round bars are found in various industries including industries such as Oil and gas exploration and Transport, storage and chemical processing. The ASTM A276 Duplex Steel 2205 Round Bars are widely found in applications in High chloride and marine environments. They are also used in processing equipment.


Duplex Steel S31803 / S32205 Round Bar Chemical Composition:

Grade

C

Mn

Si

P

S

Cr

Mo

Ni

N

Fe

S31803

0.030 max

2.00 max

1.00 max

0.030 max

0.020 max

22.0 – 23.0

3.0 – 3.5

4.50 – 6.50

0.14 – 0.20

63.72 min

S32205

0.030 max

2.00 max

1.00 max

0.030 max

0.020 max

21.0 – 23.0

2.50 - 3.50

4.50 – 6.50

0.8 – 0.20

63.54 min


Duplex S31803 / S32205 Round Bars Mechanical Properties:

Density

Melting Point

Tensile Strength

Yield Strength (0.2%Offset)

Elongation

7.8 g/cm3

1350 °C (2460 °F)

Psi – 80000 , MPa – 550

Psi – 116000 , MPa – 800

15 %



Additional Information:

  • Packaging Details: Duplex S31803/S32205 Round Bar are surface wash and clean to remove all impurities and stock in the warehouse. Then it is wrapped in thin plastic and also it ends are protected by plastic caps to avoid any damage in transit Duplex S31803/S32205 Round Bar is bundled in bubble wrap followed by assorting them in colored plastic bundles. An outer rope is tied to protect the tubing and they are packed in wooden box or container. M P Jain Provide Duplex S31803/S32205 Round Bar with all necessary documents such as commercial invoice, packing list, Test Reports, HS Code, Country of Origin attested by the chamber of commerce, Fumigation Certificate, Warranty Letter, and Base Material Certificates. Every lot is supplied with a material test certificate as per EN 10204 NACE 3.1 standards indicating the chemical and mechanical properties of the Instrumentation Tubes. We also confirm the guarantee of the Duplex S31803/S32205 Round Bar supplied as per Purchase order specifications and attest the same in the Material Test Certificate. We also welcome any third party inspection from an agency nominated by the customer to comply with NACE 3.2 Certification if required by the customer at an extra cost.
Get Best Quote Request Callback
Super Duplex S32750 Round Bars

Super Duplex S32750 Round Bars

Product Price: Rs 260 / PieceGet Best Price

Product Details:
Length6 Meters
BrandMPJ
ShapeRound
Usage/ApplicationAutomobile
MaterialSuper Duplex Steel
GradeDuplex S32750
Country of OriginMade in India
Diameter120 mm

The Super Duplex UNS S32750 Round bars are made with high molybdenum, chromium and nitrogen content. The alloy mixture of these Super Duplex UNS S32760 Round bars are made with 24 – 26% of Chromium, 6 – 8% of Nickel, and 3 – 5% of molybdenum. Due to the proper chemical composition of the Super Duplex UNS S32750 Round Bars, they can withstand pitting and crevice corrosion. The Super Duplex UNS S32760 Round bars are also resistant to chloride stress corrosion cracking. They also exhibit good weldability and very high mechanical strength. Applications of the Super Duplex UNS S32760 Round bars are found in various industries. Some of the industries that use the Super Duplex UNS S32750 Round bars are Petrochemical, Pulp and paper, Oil and gas production and Chemical industries. These round bars are also used for the production of Lifting and pulley equipment.


32750/S32760 Super Duplex Round Bar Chemical Composition:

Grade

C

Mn

Si

P

S

Cr

Mo

Ni

N

Fe

 S32750

0.030 max

1.20 max

0.80 max

0.035 max

0.020 max

24.00 – 26.00

3.00 – 5.00

6.00 – 8.00

0.24 – 0.32

58.095 min

 S32760

0.05 max

1.00 max

1.00 max

0.030 max

0.010 max

24.00 – 26.00

3.00 – 4.00

6.00 – 8.00

0.20 – 0.30

57.61 min


Super Duplex S32750/S32760 Rods Mechanical Properties:

Grades

Density (g/cm 3)

Density (lb/in 3)

Melting Point (°C)

Melting Point (°F)

S32750/S32760

7.8

0.281

1350

2460




Additional Information:

  • Packaging Details: Super Duplex S32750/S32760 Round Bar are surface wash and clean to remove all impurities and stock in the warehouse. Then it is wrapped in thin plastic and also it ends are protected by plastic caps to avoid any damage in transit Super Duplex S32750/S32760 Round Bar is bundled in bubble wrap followed by assorting them in colored plastic bundles. An outer rope is tied to protect the tubing and they are packed in wooden box or container. M P Jain Provide Super Duplex S32750/S32760 Round Bar with all necessary documents such as commercial invoice, packing list, Test Reports, HS Code, Country of Origin attested by the chamber of commerce, Fumigation Certificate, Warranty Letter, and Base Material Certificates. Every lot is supplied with a material test certificate as per EN 10204 NACE 3.1 standards indicating the chemical and mechanical properties of the Instrumentation Tubes. We also confirm the guarantee of the Super Duplex S32750/S32760 Round Bar supplied as per Purchase order specifications and attest the same in the Material Test Certificate. We also welcome any third party inspection from an agency nominated by the customer to comply with NACE 3.2 Certification if required by the customer at an extra cost.
Get Best Quote Request Callback
Cupro Nickel 90/10 Round Bar

Cupro Nickel 90/10 Round Bar

Product Price: Rs 300 / PieceGet Best Price

Product Details:
Single Piece Length3660 mm
Usage/ApplicationPaper Industries
BrandMPJ
MaterialCopper Nickel
Material StandardASTM B151
Diameter120 mm
ShapeRound
Country of OriginMade in India
Material GradeCupro Nickel 90/10

M P Jain Tubing Solution is the leading stockist, supplier, & manufacturer of Copper Nickel 90 / 10 Round Bars. Cu-Ni 90 / 10 Round Bars is generally used in Fish crates for aquaculture, Hydraulic lines, Heat condensers and exchangers, Desalination units, Tubes for ships and power plants, Sea water pipework, Offshore fire water systems, and so on. Cupro Nickel 90 / 10 Bars is a copper – based alloy industrialized as an economical substitute for Cu Ni 70 / 30 Round Bars. Meanwhile, these Copper Nickel 90 / 10 Round Bars (UNS C70600) are an alloy of nickel, copper and firming components such as manganese and iron. Cu-Ni 90 / 10 Bars are also being offered in different sizes and shapes to our customers. Cupro Nickel 90 / 10 Bars are alloys of copper (base metal with the largest individual content) and nickel with or without other elements, whereby the zinc content may not be more than one percent. Cu-Ni 90 / 10 Bars for marine use were developed for naval applications in the early part of the century with a view to improving the corrosion resistance of condenser tubes and seawater piping.

Specifications:

  • Length Range: 100 mm to 3660 mm Long
  • Diameter Range: 6 mm to 120 mm


90/10 Cupro Nickel Round Bar Chemical Composition:

Grade

Cu

Mn

Pb

Ni

Fe

Zn

Cupro Nickel 90/10

88.6 min

1.0 max

0.05 max

9-11 max

1.8 max

1 max

 

Cupro Nickel 90/10 Rods Mechanical Properties:

Density

Melting Point

Tensile Strength

Yield Strength (0.2%Offset)

Elongation

0.323 lb/in3 at 68 F

2260 F

50000 psi

20000 psi

30 %




Additional Information:

  • Packaging Details: Cupro Nickel 90/10 Round Bar are surface wash and clean to remove all impurities and stock in the warehouse. Then it is wrapped in thin plastic and also it ends are protected by plastic caps to avoid any damage in transit Cupro Nickel 90/10 Round Bar is bundled in bubble wrap followed by assorting them in colored plastic bundles. An outer rope is tied to protect the tubing and they are packed in wooden box or container. M P Jain Provide Cupro Nickel 90/10 Round Bar with all necessary documents such as commercial invoice, packing list, Test Reports, HS Code, Country of Origin attested by the chamber of commerce, Fumigation Certificate, Warranty Letter, and Base Material Certificates. Every lot is supplied with a material test certificate as per EN 10204 NACE 3.1 standards indicating the chemical and mechanical properties of the Instrumentation Tubes. We also confirm the guarantee of the Cupro Nickel 90/10 Round Bar supplied as per Purchase order specifications and attest the same in the Material Test Certificate. We also welcome any third party inspection from an agency nominated by the customer to comply with NACE 3.2 Certification if required by the customer at an extra cost.
Get Best Quote Request Callback
Cupro Nickel 70/30 Round Bar

Cupro Nickel 70/30 Round Bar

Product Price: Rs 200 / PieceGet Best Price

Product Details:
Usage/ApplicationIndustrial
Single Piece Length6 meter
BrandMPJ
MaterialCopper Nickel
Size300mm
Surface FinishedBright Polished
FormRound

Copper Nickel 70/30 is the alloy that is based on elements like chromium, nickel, and molybdenum. This is the reason that the alloy is used in the industrial application used in the elevated temperatures. However, the alloy is the best among all the others alloys which are used in the application. The alloy is having the best corrosion resistance properties similar to the copper nickel 90/10. Along with this, the alloy is also having the high yielding strength which is there in the austenitic grade of alloy. Copper Nickel 70/30 Round Bars is used in industries such as petrochemical, pharmaceuticals, oil and gas, pulp and paper, and many more. The bars are used in the industries because of the properties that are inherited in them. The properties which are there in the bars are corrosion resistance ability, pitting corrosion resistance, crevice corrosion resistance in the elevated temperature.


Cupro Nickel 70/30 Round Bar Equivalent Grades:

STANDARD

UNS

WNR.

EN

AFNOR

Cupro Nickel 70/30

C71500

2.0882

NiCr20CuMo

Z2NCUD31-20AZ


Chemical Composition of Cupro Nickel 70/30 Round Bar:

Grade

Cu

Mn

Pb

Ni

Fe

Zn

Cupro Nickel 70/30

65 min

1.0 max

0.05 max

29-33 max

0.4-1.0 max

1 max

 

Mechanical Properties Of Cupro Nickel 70/30 Round Bar:

Density

Melting Point

Tensile Strength

Yield Strength (0.2%Offset)

Elongation

0.323 lb/in3 at 68 F

2260 F

50000 psi

70 / 3000 psi

30 %



Additional Information:

  • Packaging Details: Cupro Nickel 70/30 Round Bar are surface wash and clean to remove all impurities and stock in the warehouse. Then it is wrapped in thin plastic and also it ends are protected by plastic caps to avoid any damage in transit Cupro Nickel 70/30 Round Bar is bundled in bubble wrap followed by assorting them in colored plastic bundles. An outer rope is tied to protect the tubing and they are packed in wooden box or container. M P Jain Provide Cupro Nickel 70/30 Round Bar with all necessary documents such as commercial invoice, packing list, Test Reports, HS Code, Country of Origin attested by the chamber of commerce, Fumigation Certificate, Warranty Letter, and Base Material Certificates. Every lot is supplied with a material test certificate as per EN 10204 NACE 3.1 standards indicating the chemical and mechanical properties of the Instrumentation Tubes. We also confirm the guarantee of the Cupro Nickel 70/30 Round Bar supplied as per Purchase order specifications and attest the same in the Material Test Certificate. We also welcome any third party inspection from an agency nominated by the customer to comply with NACE 3.2 Certification if required by the customer at an extra cost.
Get Best Quote Request Callback
Inconel 625 Round Bars

Inconel 625 Round Bars

Product Price: Rs 200 / PieceGet Best Price

Product Details:
BrandMPJ
ShapeRound
MaterialInconel
Size300mm
Single Piece Length6 meter
ApplicationPharmaceutical Equipment
Material GradeInconel 625

Inconel 625 Round Bar is an alloy that is solution strengthened. Typically practised during the casting process, the metals are dissolved into one another when all the parties involved are in the molten state. This process is referred to as a Solid solution hardening. In the case of aircraft grade ASTM B446 UNS N06625, element niobium is added to the nickel-chromium matrix in order to stiffen it, in the presence of molybdenum. This combination of unusual alloyants is what makes the nickel based AMS 5666 Inconel 625 Flat Bar stock a very desirable alloy grade for varying operations across many key industrial sectors. Another commonly utilized heat process on the Alloy 625 Round Bar is that of stress relieving where the alloy has to be soaked up to a period of 4 hours at a temperature of about 900°C, following which the alloy is cooled in ambient air.

 

Inconel 625 Round Bar Equivalent Grades:

STANDARD

WERKSTOFF NR.

UNS

GOST

AFNOR

JIS

BS

EN

OR

Inconel 625

2.4856

N06625

????75????????

NC22DNB4M

NCF 625

NA 21

NiCr22Mo9Nb

????602

 

Chemical Composition of Inconel 625 Round Bar:

Grade

Ni

Cr

Fe

C

Mn

Si

Mo

Co

Al

Ti

Nb + Ta

P

S

Inconel 625

58.0 min

20.0 – 23.0

5.0 max

0.10 max

0.50 max

0.50 max

8.0 – 10.0

1.0 max

0.40 max

0.40 max

3.15 – 4.15

0.015 max

0.015 max


Mechanical Properties of Inconel 625 Round Bars:

Density

Melting Point

Tensile Strength

Yield Strength (0.2%Offset)

Elongation

8.4 g/cm3

1350 °C (2460 °F)

Psi – 135,000 , MPa – 930

Psi – 75,000 , MPa – 517

42.5 %




Additional Information:

  • Packaging Details: Inconel 625 Round Bar are surface wash and clean to remove all impurities and stock in the warehouse. Then it is wrapped in thin plastic and also it ends are protected by plastic caps to avoid any damage in transit. Inconel 625 Round Bar is bundled in bubble wrap followed by assorting them in colored plastic bundles. An outer rope is tied to protect the tubing and they are packed in wooden box or container. M P Jain Provide Inconel 625 Round Bar with all necessary documents such as commercial invoice, packing list, Test Reports, HS Code, Country of Origin attested by the chamber of commerce, Fumigation Certificate, Warranty Letter, and Base Material Certificates. Every lot is supplied with a material test certificate as per EN 10204 NACE 3.1 standards indicating the chemical and mechanical properties of the Instrumentation Tubes. We also confirm the guarantee of the Inconel 625 Round Bar supplied as per Purchase order specifications and attest the same in the Material Test Certificate. We also welcome any third party inspection from an agency nominated by the customer to comply with NACE 3.2 Certification if required by the customer at an extra cost.
Get Best Quote Request Callback
Inconel 718 Round Bars

Inconel 718 Round Bars

Product Price: Rs 200 / PieceGet Best Price

Product Details:
BrandMPJ
ShapeRound
Usage/ApplicationManufacturing
MaterialInconel
Material GradeInconel 718
Single Piece Length3000 mm
Diameter800 mm
Country of OriginMade in India

Inconel 718 Round Bar is a nickel chromium alloy bar that has up to 55% nickel in the composition. The content includes 17% chromium, 4.9% niobium, 6.6% iron minimum and aluminum, boron, carbon, cobalt, copper, manganese, phosphorus, lead, sulfur and silicon. The Inconel 718 Round Bar and other types of bars also have tantalum and titanium for stabilization.

The material has 1375MPa ultimate tensile strength and 1100MPa minimum yield strength. The 2.4668 Alloy 718 Bar is durable, ductile and highly corrosion resistant. It is used in gas turbines, valves in subsurface safety tools, industrial grade fasteners, and thrust reverser components and in aircraft engines.


M P Jain Tubing Solution is a leading manufacturer and hold a large ASTM B637 UNS N07718 Round Bar Stock to cater any order size from the customers.The material has good weldability, formability, high oxidation resistance and high durability in elevated temperatures up to 1300F. The UNS N07718 Round Bar also has great cryogenic performance. This is one of the reasons why the material is used in highly thermally fluctuating applications.


Specifications:

  • Diameter Range: 3~800mm
  • Length Range: 100 mm To 3000 mm Long & Abov

 

Inconel 718 Round bar Chemical Composition:


Ni

Cr

Fe

Mo

Nb+Ta

C

Mn

Si

Ph

S

Ti

Cu

B

Al

Co

 

Min

50

17

Bal

2.8

4.75

-

-

-

-

-

0.65

-

-

0.20

-

Max

55

21

-

3.3

5.50

0.08

0.035

0.35

0.015

0.015

1.15

0.30

0.0006

0.80

1.00

 

Inconel 718 Round bar Physical Properties:

Grade

Density

Melting Point

Alloy 718

0.297 lb/in3

2300 – 2435°F

 



Additional Information:

  • Packaging Details: Inconel 718 Round Bar are surface wash and clean to remove all impurities and stock in the warehouse. Then it is wrapped in thin plastic and also it ends are protected by plastic caps to avoid any damage in transit. Inconel 718 Round Bar is bundled in bubble wrap followed by assorting them in colored plastic bundles. An outer rope is tied to protect the tubing and they are packed in wooden box or container. M P Jain Provide Inconel 718 Round Bar with all necessary documents such as commercial invoice, packing list, Test Reports, HS Code, Country of Origin attested by the chamber of commerce, Fumigation Certificate, Warranty Letter, and Base Material Certificates. Every lot is supplied with a material test certificate as per EN 10204 NACE 3.1 standards indicating the chemical and mechanical properties of the Instrumentation Tubes. We also confirm the guarantee of the Inconel 718 Round Bar supplied as per Purchase order specifications and attest the same in the Material Test Certificate. We also welcome any third party inspection from an agency nominated by the customer to comply with NACE 3.2 Certification if required by the customer at an extra cost.
Get Best Quote Request Callback
Inconel 825 Round Bar

Inconel 825 Round Bar

Product Price: Rs 320 / PieceGet Best Price

Product Details:
BrandMPJ
ShapeRound
Usage/ApplicationAutomobile Industries
MaterialInconel
Size500 mm
FormRound Bar
FinishBA Finish
Material GradeInconel 825

M P Jain Tubing Solution is a renowned manufacturer and exporter of Inconel 825 Round Bars. Inconel 825 Round Bars is composed of nickel, iron and chromium content. It also has some amount of titanium, molybdenum and copper content. It’s alloying elements and chemical composition is formulated to provide exceptional corrosion resistance even in exposed to most corrosive environments. It is similar to its original grade. Alloy 825 is also known as UNS N08825 grade. It has some amount of nickel makes it resistive to chloride stress corrosion cracking. The combination of molybdenum and copper derived its resistance ability when compared to conventional grades. It offers improved resistance to reducing and oxidizing acids. These are also resistive to sulfuric and phosphoric acids.

These are come to an application due to its noticeable features such as excellent finish, robust construction, and resistance to rusting, durability and dimensional accuracy and many more. These are manufactured from high-quality crude materials. We represent them in various standards, specifications, designations, shapes, and sizes.


Mechanical Properties of Inconel 718 Round Bar:

Density

Melting Point

Tensile Strength

Yield Strength (0.2%Offset)

Elongation

8.14 g/cm3

1400 °C (2550 °F)

Psi – 80,000 , MPa – 550

Psi – 32,000 , MPa –220

30 %

 

Chemical Composition of Inconel 718 Round Bar:

C

Al

Mn

Si

Ti

Ni

Fe

Mb

Cu

Cr

S

0.05 max

0.2 max

1.0 max

0.5 max

0.6 – 1.2

38.0 – 46.0

22.0 min

2.5 – 3.5

1.5 – 3.0

19.5 – 23.5

0.015 max



Additional Information:

  • Packaging Details: Inconel 825 Round Bar are surface wash and clean to remove all impurities and stock in the warehouse. Then it is wrapped in thin plastic and also it ends are protected by plastic caps to avoid any damage in transit. Inconel 825 Round Bar is bundled in bubble wrap followed by assorting them in colored plastic bundles. An outer rope is tied to protect the tubing and they are packed in wooden box or container. M P Jain Provide Inconel 825 Round Bar with all necessary documents such as commercial invoice, packing list, Test Reports, HS Code, Country of Origin attested by the chamber of commerce, Fumigation Certificate, Warranty Letter, and Base Material Certificates. Every lot is supplied with a material test certificate as per EN 10204 NACE 3.1 standards indicating the chemical and mechanical properties of the Instrumentation Tubes. We also confirm the guarantee of the Inconel 825 Round Bar supplied as per Purchase order specifications and attest the same in the Material Test Certificate. We also welcome any third party inspection from an agency nominated by the customer to comply with NACE 3.2 Certification if required by the customer at an extra cost.
Get Best Quote Request Callback
Monel 400 Round Bar

Monel 400 Round Bar

Product Price: Rs 450 / PieceGet Best Price

Product Details:
BrandMPJ
ShapeRound
Usage/ApplicationChemical Industries
Size120 mm
FinishingPolish
Country of OriginMade in India
Material GradeMonel 400
MaterialMonel

Monel 400 Round Bar is copper and nickel based alloy that is today had become widely popular because of high performances. This alloy is excellently exhibiting good acid and alkaline resistance ability. Also, it is having good tensile strength, ductility, excellent thermal conductivity and can be hardened through the cold working. Also, it can be used at those applications where temperature ranges from sub-zero to 538 Deg C. This alloy is unique among the Monel as it is purely alloy. As it is containing copper and nickel alloy in equal proportion it has become good for use in critical industrial application in form of Monel 400 bar all across the globe. M P Jain Tubing Solution is highly admired industry that is fully engaged in offering a collection of excellent quality of Monel 400 bar.


Chemical Composition of Alloy 400 Rods:

Grade

Ni

Fe

C

Mn

Si

Cu

Al

S

Monel 400

63.0 min

1.0 – 2.5

0.3 max

2.0 max

0.5 max

28.0 – 34.0

0.50 max

0.02 max

 

Mechanical Properties of Monel 400 Bars:

Density

Melting Point

Tensile Strength

Yield Strength (0.2%Offset)

Elongation

8.8 g/cm3

1350 °C (2460 °F)

Psi – 80000 , MPa – 550

Psi – 35000 , MPa – 240

40 %



Additional Information:

  • Packaging Details: Monel 400 Round Bar are surface wash and clean to remove all impurities and stock in the warehouse. Then it is wrapped in thin plastic and also it ends are protected by plastic caps to avoid any damage in transit. Monel 400 Round Bar is bundled in bubble wrap followed by assorting them in colored plastic bundles. An outer rope is tied to protect the tubing and they are packed in wooden box or container. M P Jain Provide Monel 400 Round Bar with all necessary documents such as commercial invoice, packing list, Test Reports, HS Code, Country of Origin attested by the chamber of commerce, Fumigation Certificate, Warranty Letter, and Base Material Certificates. Every lot is supplied with a material test certificate as per EN 10204 NACE 3.1 standards indicating the chemical and mechanical properties of the Instrumentation Tubes. We also confirm the guarantee of the Monel 400 Round Bar supplied as per Purchase order specifications and attest the same in the Material Test Certificate. We also welcome any third party inspection from an agency nominated by the customer to comply with NACE 3.2 Certification if required by the customer at an extra cost.
Get Best Quote Request Callback
Monel K500 Round Bars

Monel K500 Round Bars

Product Price: Rs 200 / PieceGet Best Price

Product Details:
BrandMPJ
ShapeRound
Material GradeMonel K500
Usage/ApplicationChemical Industries
Size120 mm
MaterialMonel
Bar Length3000 mm

Monel K500 Round Bars is a nickel-copper alloy, precipitation hardenable in the course of additions of titanium and aluminum. Monel K500 Bars (Monel K500 Rods) retains the outstanding corrosion resistant characteristics of Monel 400 and has better strength and hardness after precipitation hardening when compared with Alloy 400. Monel Alloy K500 Rods is particularly well suited for centrifugal pumps in the marine industry because of its high strength and low corrosion rates in high-velocity seawater. Also known as UNS N04405 Round Bars, our Monel Alloy K500 Bars are accessible to our valuable customers in different range of diameters, wall thicknesses and sizes in customized form and also at quite affordable rates.


Monel Alloy K500 Round Bar Chemical Composition:

Grade

Ni

Fe

C

Mn

Si

Cu

Al

S

Ti

Monel K500

63.0 min

0.5 – 2

0.25 max

1.5 max

0.5 max

27.0 – 33.0

2.3 – 3.15

0.010 max

0.35 – 0.85

 

K500 Monel Alloy Round Bars Mechanical Properties:

Density

Melting Point

Tensile Strength

Yield Strength (0.2%Offset)

Elongation

8.44 g/cm3

1350 °C (2460 °F)

Psi – 160000 , MPa – 1100

Psi – 115000 , MPa – 790

20 %




Additional Information:

  • Packaging Details: Monel K500 Round Bar are surface wash and clean to remove all impurities and stock in the warehouse. Then it is wrapped in thin plastic and also it ends are protected by plastic caps to avoid any damage in transit. Monel K500 Round Bar is bundled in bubble wrap followed by assorting them in colored plastic bundles. An outer rope is tied to protect the tubing and they are packed in wooden box or container. M P Jain Provide Monel K500 Round Bar with all necessary documents such as commercial invoice, packing list, Test Reports, HS Code, Country of Origin attested by the chamber of commerce, Fumigation Certificate, Warranty Letter, and Base Material Certificates. Every lot is supplied with a material test certificate as per EN 10204 NACE 3.1 standards indicating the chemical and mechanical properties of the Instrumentation Tubes. We also confirm the guarantee of the Monel K500 Round Bar supplied as per Purchase order specifications and attest the same in the Material Test Certificate. We also welcome any third party inspection from an agency nominated by the customer to comply with NACE 3.2 Certification if required by the customer at an extra cost.
Get Best Quote Request Callback
Titanium Grade 2 Round Bars

Titanium Grade 2 Round Bars

Product Price: Rs 200 / PieceGet Best Price

Product Details:
BrandMPJ
ShapeRound
Usage/ApplicationChemical Industries
GradeTitanium Grade 2
MaterialTitanium
Single Piece Length3000 mm
Material StandardASTM B348
Diameter500 mm

M P Jain Tubing Solution is one of the leading Manufacturer, Supplier and Exporter of Titanium Grade 2 Round Bars that are actually manufactured from High Quality of Standard Raw Materials and are designed as per with national and international standards. As with other applications where corrosion resistance and formability are essential, Grade 2 Titanium Round Bars (also referred as Din 3.7035 Round Bars) proves useful in the aerospace industry. In addition to titanium sheet for airframe skins, this pure grade of UNS R50400 Round Bars is ideal for ductwork, brackets and galley equipment. We offer these Titanium Grade 2 products in custom-made shapes and sizes as per the requirements given by our clients, and that too at an affordable and market leading prices.


Specifications:

  • Diameter Range: 5 mm To 500 mm
  • Length Range: 100 mm To 3000 mm Long & Above
  • Standards: ASTM B348/ ASTM SB348

 

Grade 2 Titanium Round Bar Chemical Composition:

Grade

Ti

C

Fe

H

N

O

Titanium Grade 2

 99.2 min

 0.1 max

0.3 max

 0.015 max

0.3 max

 0.025 max

 

Titanium Alloy Grade 2 Mechanical Properties:

Density

Melting Point

Tensile Strength

Yield Strength (0.2%Offset)

Elongation

 4.5 g/cm3

 1665 °C (3030 °F)

 Psi – 49900 , MPa – 344

 Psi – 39900 , MPa – 275

 20%

 

Equivalent Grades for Grade 2 Titanium Round Bar:

STANDARD

WERKSTOFF NR.

UNS

Titanium Grade 2

3.7035

R50400



Additional Information:

  • Packaging Details: Titanium Grade 2 Round Bar are surface wash and clean to remove all impurities and stock in the warehouse. Then it is wrapped in thin plastic and also it ends are protected by plastic caps to avoid any damage in transit Titanium Grade 2 Round Bar is bundled in bubble wrap followed by assorting them in colored plastic bundles. An outer rope is tied to protect the tubing and they are packed in wooden box or container. M P Jain Provide Titanium Grade 2 Round Bar with all necessary documents such as commercial invoice, packing list, Test Reports, HS Code, Country of Origin attested by the chamber of commerce, Fumigation Certificate, Warranty Letter, and Base Material Certificates. Every lot is supplied with a material test certificate as per EN 10204 NACE 3.1 standards indicating the chemical and mechanical properties of the Instrumentation Tubes. We also confirm the guarantee of the Titanium Grade 2 Round Bar supplied as per Purchase order specifications and attest the same in the Material Test Certificate. We also welcome any third party inspection from an agency nominated by the customer to comply with NACE 3.2 Certification if required by the customer at an extra cost.
Get Best Quote Request Callback
Nickel 201 Round Bars

Nickel 201 Round Bars

Product Price: Rs 100 / PieceGet Best Price

Product Details:
Single Piece Length3000 mm
Size500 mm
Usage/ApplicationChemical Industries
MaterialNickel
BrandMPJ
Country of OriginMade in India
GradeNickel 201

Nickel 201 Round Bars is released into the air by power plants and trash incinerators, where it will than settle to the ground or fall down after reactions with raindrops. Nickel 201 Bars can also end up in surface water when it is a part of wastewater streams. The larger part of compounds from Nickel 201 Bars that are released to the environment will adsorb to sediment or soil particles and become immobile

 

There are many good features that this product is having after getting produced using high quality of alloy. These are like:

  • Withstanding heavy loads
  • Rugged construction
  • Commendable dimensional accuracy
  • High tensile strength
  • Stress corrosion cracking and crevice corrosion cracking resistance.
  • Durable
  • Longevity
  • 100% resistance to corrosion
  • Anti-corrosive


201 Nickel Round Bar Chemical Composition:

Grade

C

Mn

Si

Cu

S

Fe

Mo

Ni

Cr

Nickel 201

0.02 max

0.35 max

0.35 max

0.25 max

0.01 min

0.40 max

99 min


Nickel Alloy 201 Rods Mechanical Properties:

Density

Melting Point

Tensile Strength

Yield Strength (0.2%Offset)

Elongation

8.9 g/cm3

1446 °C (2635 °F)

 Psi – 67,000 , MPa – 462

Psi – 21,500 , MPa – 148

45 %




Additional Information:

  • Packaging Details: Nickel 201 Round Bar are surface wash and clean to remove all impurities and stock in the warehouse. Then it is wrapped in thin plastic and also it ends are protected by plastic caps to avoid any damage in transit. Nickel 201 Round Bar is bundled in bubble wrap followed by assorting them in colored plastic bundles. An outer rope is tied to protect the tubing and they are packed in wooden box or container. M P Jain Provide Nickel 201 Round Bar with all necessary documents such as commercial invoice, packing list, Test Reports, HS Code, Country of Origin attested by the chamber of commerce, Fumigation Certificate, Warranty Letter, and Base Material Certificates. Every lot is supplied with a material test certificate as per EN 10204 NACE 3.1 standards indicating the chemical and mechanical properties of the Instrumentation Tubes. We also confirm the guarantee of the Nickel 201 Round Bar supplied as per Purchase order specifications and attest the same in the Material Test Certificate. We also welcome any third party inspection from an agency nominated by the customer to comply with NACE 3.2 Certification if required by the customer at an extra cost.
Get Best Quote Request Callback
Nickel 200 Round Bars

Nickel 200 Round Bars

Product Price: Rs 200 / KilogramGet Best Price

Product Details:
Single Piece Length3000 mm
Size500 mm
FinishPolished
MaterialNickel
BrandMPJ
Country of OriginMade in India
ApplicationChemical Equipment
GradeNickel 200

Nickel 200 Round Bars is a commercially unalloyed nickel that displays exceptional corrosion resistance and has pretty low electrical resistivity. Nickel 200 Bars are reinforced wrought materials, and is a commercially pure material that shows excellent corrosion resistance. Meanwhile, these Nickel 200 Round Bars are also being offered in different sizes and shapes to our customers. Hot forming in Nickel 200 Bars should be performed within a temperature range between 1600 Degree F and 2250 Degree F (870 Degree C – 1230 Degree C) with heavier sections heated to a minimum of 2000 Degree F before forming. 

 

200 Nickel Round Bar Chemical Composition:

Grade

C

Mn

Si

Cu

S

Fe

Mo

Ni

Cr

Nickel 200

0.15 max

0.35 max

0.35 max

0.25 max

0.01 min

0.40 max

99 min

 

Nickel Alloy 200 Rods Mechanical Properties:

Density

Melting Point

Tensile Strength

Yield Strength (0.2%Offset)

Elongation

8.9 g/cm3

1446 °C (2635 °F)

 Psi – 67,000 , MPa – 462

Psi – 21,500 , MPa – 148

45 %

 

Equivalent Grades for 200 Nickel Round Bar:

STANDARD

WERKSTOFF NR.

UNS

JIS

BS

GOST

AFNOR

EN

Nickel 200

2.4066

N02200

NW 2200

NA 11

????-2

N-100M

Ni 99.2



Additional Information:

  • Packaging Details: Nickel 200 Round Bar are surface wash and clean to remove all impurities and stock in the warehouse. Then it is wrapped in thin plastic and also it ends are protected by plastic caps to avoid any damage in transit. Nickel 200 Round Bar is bundled in bubble wrap followed by assorting them in colored plastic bundles. An outer rope is tied to protect the tubing and they are packed in wooden box or container. M P Jain Provide Nickel 200 Round Bar with all necessary documents such as commercial invoice, packing list, Test Reports, HS Code, Country of Origin attested by the chamber of commerce, Fumigation Certificate, Warranty Letter, and Base Material Certificates. Every lot is supplied with a material test certificate as per EN 10204 NACE 3.1 standards indicating the chemical and mechanical properties of the Instrumentation Tubes. We also confirm the guarantee of the Nickel 200 Round Bar supplied as per Purchase order specifications and attest the same in the Material Test Certificate. We also welcome any third party inspection from an agency nominated by the customer to comply with NACE 3.2 Certification if required by the customer at an extra cost.
Get Best Quote Request Callback
Titanium Grade 5 Round Bars

Titanium Grade 5 Round Bars

Product Price: Rs 320 / PieceGet Best Price

Product Details:
BrandMPJ
ShapeRound
GradeGrade 5
Size500 mm
Single Piece Length3000 mm
Material StandardASTM B348
MaterialTitanium

M P Jain Tubing Solution is one of the largest exporter, manufacturer and supplier of Titanium Grade 5 Round Bars stockist and Exporters in India. Titanium Gr 5 Round Bars is used in applications that are up to 400 degrees Celsius. It has a chemical composition of 6% aluminum, 4% vanadium, 0.25% (maximum) iron, 0.2% (maximum) oxygen, and the remainder titanium. It is significantly stronger than commercially pure titanium while having the same stiffness and thermal properties. Among its many advantages, it is heat treatable. These Titanium Grade 5 Bars is the most broadly used titanium alloy of the alpha – plus – beta session, and is as well the most communal of all titanium alloys. Meanwhile, our Titanium Grade 5 Bars are also being offered in different sizes and shapes to our customers. Although “commercially pure” titanium has acceptable mechanical properties and has been used for orthopedic and dental implants, for most applications of these Titanium Grade 5 Bars is alloyed with small amounts of aluminum and vanadium, typically 6 % and 4 % respectively, by weight. These Titanium Grade 5 Bars is resistant to general corrosion but may be quickly attacked by environments that cause breakdown of the protective oxide layer including hydrofluoric (HF), hydrochloric (HCl), sulfuric and phosphoric acids.


Grade 5 Titanium Round Bar Chemical Composition:

Grade

Ti

C

Fe

Al

V

O

Titanium Grade 5

 90 min

 –

0.25 max

 6 min

4 min

 0.02 max


Titanium Alloy Grade 5 Mechanical Properties:

Density

Melting Point

Tensile Strength

Yield Strength (0.2%Offset)

Elongation

 4.43 g/cm3

1632 °C (2970 °F)

Psi – 138000 , MPa – 950

Psi – 128000 , MPa – 880

 14 %



Additional Information:

  • Packaging Details: Titanium Grade 5 Round Bar are surface wash and clean to remove all impurities and stock in the warehouse. Then it is wrapped in thin plastic and also it ends are protected by plastic caps to avoid any damage in transit Titanium Grade 5 Round Bar is bundled in bubble wrap followed by assorting them in colored plastic bundles. An outer rope is tied to protect the tubing and they are packed in wooden box or container. M P Jain Provide Titanium Grade 5 Round Bar with all necessary documents such as commercial invoice, packing list, Test Reports, HS Code, Country of Origin attested by the chamber of commerce, Fumigation Certificate, Warranty Letter, and Base Material Certificates. Every lot is supplied with a material test certificate as per EN 10204 NACE 3.1 standards indicating the chemical and mechanical properties of the Instrumentation Tubes. We also confirm the guarantee of the Titanium Grade 5 Round Bar supplied as per Purchase order specifications and attest the same in the Material Test Certificate. We also welcome any third party inspection from an agency nominated by the customer to comply with NACE 3.2 Certification if required by the customer at an extra cost.
Get Best Quote Request Callback
Alloy 20 Round Bars

Alloy 20 Round Bars

Product Price: Rs 300 / PieceGet Best Price

Product Details:
Single Piece Length6 meter
Size150NB
FinishPolished
MaterialAlloy 20
ShapeRound
BrandMPJ
Usage/ApplicationHousehold Repair
StandardASTM

Alloy 20 Round Bar is an austenitic nickel-iron-chromium based alloy with additions of molybdenum and copper. Its nickel content helps in its chloride ion stress and corrosion resistance. Alloy 20 Round bars are stress corrosion cracking, crevice corrosion, and resistive to difficult conditions. Our Alloy 20 Round Bars are used for processing pharmaceuticals, gasoline, food, solvents, plastics, explosives, synthetic fibres, and a lot of other product.


Alloy 20 Round Bars Equivalent Grades:

STANDARD

UNS

EN

WERKSTOFF NR.

AFNOR

Alloy 20

N08020

NiCr20CuMo

2.4660

Z2NCUD31-20AZ


The performance characteristics of Alloy 20 Round Bar :

  • Excellent overall corrosion & oxidation resistance, especially in environments containing high levels of sulfuric, nitric & phosphoric acids
  • Excellent resistance to chloride chemicals, including outstanding inherent protection against cracking caused by stress corrosion
  • Outstanding stability against sensitization processes


Additional Information:

  • Packaging Details: Alloy 20 Round Bar are surface wash and clean to remove all impurities and stock in the warehouse. Then it is wrapped in thin plastic and also it ends are protected by plastic caps to avoid any damage in transit. Alloy 20 Round Bar is bundled in bubble wrap followed by assorting them in colored plastic bundles. An outer rope is tied to protect the tubing and they are packed in wooden box or container. M P Jain Provide Alloy 20 Round Bar with all necessary documents such as commercial invoice, packing list, Test Reports, HS Code, Country of Origin attested by the chamber of commerce, Fumigation Certificate, Warranty Letter, and Base Material Certificates. Every lot is supplied with a material test certificate as per EN 10204 NACE 3.1 standards indicating the chemical and mechanical properties of the Instrumentation Tubes. We also confirm the guarantee of the Alloy 20 Round Bar supplied as per Purchase order specifications and attest the same in the Material Test Certificate. We also welcome any third party inspection from an agency nominated by the customer to comply with NACE 3.2 Certification if required by the customer at an extra cost.
Get Best Quote Request Callback
Inconel 800 Round Bars

Inconel 800 Round Bars

Product Price: Rs 250 / PieceGet Best Price

Product Details:
BrandMPJ
ShapeRound
Usage/ApplicationAutomobile
MaterialInconel
Material GradeInconel 800
Single Piece Length6 meter
Diameter152mm
Surface FinishedPolished
FormRound

M P Jain Tubing Solution is a well-known manufacturer and supplier of the Incoloy 800 Round Bars. The ASTM B408 Incoloy 800 round bars are austenitic Round bars that possess high corrosion-resisting properties. We at M P Jain Tubing Solution are engaged in the production of the high caliber UNS N08800 Incoloy Round Bars that have developed a reputation in the industry because of the excellent strength they offer. We produce the Incoloy 800 round bars in different sizes and diameters. The Incoloy 800 Round bars are manufactured by using nickel, iron, and chromium alloy. The Nickel and chromium mixture helps the UNS N08800 Incoloy Round bars to resist various corrosive media. They are known to offer outstanding resistivity against many sulfur-containing atmospheres. The ASTM B408 Incoloy 800 round bars are highly resistant to nitride atmospheres and they can perform well in Temperatures up to 1100° F. The Incoloy 800 Round bars also exhibit great resistivity against carburization in high-temperature environments. The UNS N08800 Incoloy Round bars are also resistant in many acidic environments. 

 

Incoloy 800/800H/800HT Round Bar Chemical Composition:

Grade

C

Mn

Si

S

Cr

Fe

Ni

Cu

Al

Ti

Incoloy 800

0.10 max

1.50 max

1.00 max

0.015 max

19 – 23

39.50 min

30 – 35

0.75 max

0.15 – 0.60

0.15 – 0.60

Incoloy 800H

0.05 – 0.10

1.50 max

1.00 max

0.015 max

19 – 23

39.50 min

30 – 35

0.75 max

0.15 – 0.60

0.15 – 0.60

Incoloy 800HT

0.06 – 0.10

1.50 max

1.00 max

0.015 max

19 – 23

39.50 min

30 – 35

0.75 max

0.15 – 0.60

0.15 – 0.60


Incoloy Alloy 800/800H/800HT Round Bars Mechanical Properties:

Density

Melting Point

Tensile Strength

Yield Strength (0.2%Offset)

Elongation

7.94 g/cm3

1385 °C (2525 °F)

Psi – 75,000 , MPa – 520

Psi – 30,000 , MPa – 205

30 %




Additional Information:

  • Packaging Details: Inconel 800/ 800H/ 800HT Round Bar are surface wash and clean to remove all impurities and stock in the warehouse. Then it is wrapped in thin plastic and also it ends are protected by plastic caps to avoid any damage in transit. Inconel 800/ 800H/ 800HT Round Bar is bundled in bubble wrap followed by assorting them in colored plastic bundles. An outer rope is tied to protect the tubing and they are packed in wooden box or container. M P Jain Provide Inconel 800/ 800H/ 800HT Round Bar with all necessary documents such as commercial invoice, packing list, Test Reports, HS Code, Country of Origin attested by the chamber of commerce, Fumigation Certificate, Warranty Letter, and Base Material Certificates. Every lot is supplied with a material test certificate as per EN 10204 NACE 3.1 standards indicating the chemical and mechanical properties of the Instrumentation Tubes. We also confirm the guarantee of the Inconel 800/ 800H/ 800HT Round Bar supplied as per Purchase order specifications and attest the same in the Material Test Certificate. We also welcome any third party inspection from an agency nominated by the customer to comply with NACE 3.2 Certification if required by the customer at an extra cost.
Get Best Quote Request Callback
Inconel 600 Round Bar

Inconel 600 Round Bar

Product Price: Rs 200 / PieceGet Best Price

Product Details:
BrandMPJ
ShapeRound
Usage/ApplicationManufacturing
MaterialInconel
Material GradeInconel 600
Single Piece Length3000 mm
Diameter100 mm
FinishMatt Finish

Inconel 600 is a super alloy, which are also referred to as high performance alloys. Inconel 600 Bright Bar have the capacity to function under very high temperatures and extreme mechanical stress. Inconel 600 can be used where the end use application requires high surface stability. As a super alloy, Inconel 600 is known to have good creep and good oxidation resistance. Inconel 600 Hex Bar can be formed using conventional methods with the help of powerful equipment as it has good ductility. Inconel 600 Round Bar weld this alloy using all conventional methods like gas-tungsten arc welding, shielded metal-arc welding, gas metal-arc welding and submerged-arc welding. While welding, it is recommended that a matching alloy filler metal should be used. Further, before going through with the welding process, the surface to be welded should be cleaned & must be free from oil, paint or crayon stains.


ASTM B166 Inconel 600 Bars Equivalent Grades:

STANDARD

WERKSTOFF NR.

UNS

GOST

AFNOR

JIS

BS

EN

OR

Inconel 600

2.4816

N06600

?????????? 28-2,5-1,5

NC15FE11M

NCF 600

NA 13

NiCr15Fe

????868


Inconel Alloy 600 Round, Bright, Hex, Threaded Bar Chemical Composition:

Grade

Ni

Cr

Fe

C

Mn

S

Si

Cu

Inconel 600

72.0 min

14.0 – 17.0

6.0 – 10.0

0.15 max

1.0 max

0.015 max

0.5 max

0.5 max


600 Inconel Alloy Round Bars Mechanical Properties:

Density

Melting Point

Tensile Strength

Yield Strength (0.2%Offset)

Elongation

8.47 g/cm3

1413 °C (2580 °F)

Psi – 95,000 , MPa – 655

Psi – 45,000 , MPa – 310

40 %



Additional Information:

  • Packaging Details: Inconel 600 Round Bar are surface wash and clean to remove all impurities and stock in the warehouse. Then it is wrapped in thin plastic and also it ends are protected by plastic caps to avoid any damage in transit. Inconel 600 Round Bar is bundled in bubble wrap followed by assorting them in colored plastic bundles. An outer rope is tied to protect the tubing and they are packed in wooden box or container. M P Jain Provide Inconel 600 Round Bar with all necessary documents such as commercial invoice, packing list, Test Reports, HS Code, Country of Origin attested by the chamber of commerce, Fumigation Certificate, Warranty Letter, and Base Material Certificates. Every lot is supplied with a material test certificate as per EN 10204 NACE 3.1 standards indicating the chemical and mechanical properties of the Instrumentation Tubes. We also confirm the guarantee of the Inconel 600 Round Bar supplied as per Purchase order specifications and attest the same in the Material Test Certificate. We also welcome any third party inspection from an agency nominated by the customer to comply with NACE 3.2 Certification if required by the customer at an extra cost.
Get Best Quote Request Callback
Inconel 601 Round Bars

Inconel 601 Round Bars

Product Price: Rs 250 / PieceGet Best Price

Product Details:
BrandMPJ
ShapeRound
Usage/ApplicationManufacturing
MaterialInconel
Size500 mm
Country of OriginMade in India
Material GradeInconel 601

As a renowned supplier, we offer this Inconel 601 Round Bars in a wide range to our clients. These Inconel 601 Bars (UNS N06601) are highly resistant to carburization. Alloy 601 Round Bars are used in a lot of applications such as for trays, baskets and fixtures which are further used in various heat treatments like in carburizing and carbon nitriding. Inconel 601 bars has exceptional oxidation resistance to 2200 Degree F, extremely resistant to carburization, excellent creep and rupture power, metallurgical stability, and more. Inconel 601 Round Bars (also known as UNS N06601 Round Bars and Rods) establishes because of its resistance to enhanced temperature oxidation, lasting remarkably resistant to oxidation in the course of 2200 Deg F. When heated, these Inconel Alloy 601 Bars, shapes a thick, passivating and stable oxide coating that safeguards the external from more outbreak.

 

ASTM B166 Inconel 601 Bars Equivalent Grades:

STANDARD

WERKSTOFF NR.

UNS

GOST

AFNOR

JIS

BS

EN

OR

Inconel 601

2.4851

N06601

XH60BT

NC23FeA

NCF 601

NA 49

NiCr23Fe

????868

 

Inconel Alloy 601 Round, Bright, Hex, Threaded Bar Chemical Composition:

Grade

Ni

Cr

Fe

C

Mn

S

Si

Cu

Inconel 601

58.0 - 63.0

21.0 -25.0

Balance

0.10 max

1.0 max

0.015 max

0.5 max

1.0 max

 

601 Inconel Alloy Round Bars Mechanical Properties:

Density

Melting Point

Tensile Strength

Yield Strength (0.2%Offset)

Elongation

8.1 g/cm3

1411 °C (2571 °F)

Psi – 80,000 , MPa – 550

Psi – 30,000 , MPa – 205

30 %



Additional Information:

  • Packaging Details: Inconel 601 Round Bar are surface wash and clean to remove all impurities and stock in the warehouse. Then it is wrapped in thin plastic and also it ends are protected by plastic caps to avoid any damage in transit. Inconel 601 Round Bar is bundled in bubble wrap followed by assorting them in colored plastic bundles. An outer rope is tied to protect the tubing and they are packed in wooden box or container. M P Jain Provide Inconel 601 Round Bar with all necessary documents such as commercial invoice, packing list, Test Reports, HS Code, Country of Origin attested by the chamber of commerce, Fumigation Certificate, Warranty Letter, and Base Material Certificates. Every lot is supplied with a material test certificate as per EN 10204 NACE 3.1 standards indicating the chemical and mechanical properties of the Instrumentation Tubes. We also confirm the guarantee of the Inconel 601 Round Bar supplied as per Purchase order specifications and attest the same in the Material Test Certificate. We also welcome any third party inspection from an agency nominated by the customer to comply with NACE 3.2 Certification if required by the customer at an extra cost.
Get Best Quote Request Callback

EXPLORE MORE CATEGORIES

Looking For "Round Bars"?
Thank you Your Enquiry has been sent successfully.
© M P Jain Tubing Solutions LLP. All Rights Reserved (Terms of Use)Developed and managed by IndiaMART InterMESH Ltd.