Call 08048600090 86% Response Rate

Send Email

Nickel Alloy Pipes And Tubes

Pioneers in the industry, we offer nickel 201 pipe, nickel 200 pipe, nickel 201 tube, nickel tubes, nickel 200 tube and nickel alloy pipes from India.
Nickel 201 Pipe

Nickel 201 Pipe

Product Price: Rs 200 / KgGet Best Price

Product Details:
MaterialNickel
Steel GradeNickel 201
Tensile Strength67000 Psi
Elongation45%
Density8.9 g/cm3
Yield Strength21500 Psi
Size/Diameter150"NB
BrandMPJ

M P Jain Tubing Solution is the known manufacturer & exporter of Nickel 201 Pipe. The chemistry of Nickel 201 Pipe is identical to Nickel 200 except for the carbon content. Nickel 201 Pipe contains limits carbon content to 0.02%. Adding chromium, molybdenum, copper and other elements to these Nickel 201 pipes and pipes gives them an even higher resistance to oxidation and corrosion which makes it possible to use them in a wider range of applications. Our ability to provide Nickel Alloy 201 Seamless Pipe on a project basis is one of our strongest capabilities and is unmatched in our industry. Alloy 201 Pipe is a more acceptable material in the same type of environments when temperatures are above 600 degrees F.  Our in-stock selection of Nickel 201 piping products covers a wide range of alloys, sizes and forms. Nickel 201 Pipes extensive use in the energy and nuclear power markets" Low in Carbon content, our Nickel Alloy 201 Seamless pipe are most recommended for high-temperature applications and are resistant to the effects of a host of alkalines and acids except sulphuric compounds.


201 Nickel Alloy Pipes Chemical Composition:

Nickel 201

Ni

C

Mo

Mn

Si

Fe

P

S

Cu

Cr

Balance

0.15 max

 

0.35 max

0.35 max

0.40 max

 

0.01 max

0.25 max

 


Nickel Alloy 201 Pipe Mechanical Properties:

Density

Melting Point

Yield Strength (0.2%Offset)

Tensile Strength

Elongation

8.9 g/cm3

1446 C (2635 F)

Psi  21500 , MPa  148

Psi  67000 , MPa  462

45 %


Equivalent Grades for 201 Nickel Pipe:

STANDARD

UNS

WERKSTOFF NR.

AFNOR

EN

JIS

BS

GOST

Nickel 201

N02201

2.4068

 

LC-Ni 99

NW 2201

NA 12

2



Additional Information:

  • Packaging Details: Nickel 201 Pipe are surface wash and clean to remove all impurities and stock in the warehouse. Then it is wrapped in thin plastic and also it ends are protected by plastic caps to avoid any damage in transit. Nickel 201 Pipe is bundled in bubble wrap followed by assorting them in colored plastic bundles. An outer rope is tied to protect the tubing and they are packed in wooden box or container. M P Jain Provide Nickel 201 Pipe with all necessary documents such as commercial invoice, packing list, Test Reports, HS Code, Country of Origin attested by the chamber of commerce, Fumigation Certificate, Warranty Letter, and Base Material Certificates. Every lot is supplied with a material test certificate as per EN 10204 NACE 3.1 standards indicating the chemical and mechanical properties of the Instrumentation Tubes. We also confirm the guarantee of the Nickel 201 Pipe supplied as per Purchase order specifications and attest the same in the Material Test Certificate. We also welcome any third party inspection from an agency nominated by the customer to comply with NACE 3.2 Certification if required by the customer at an extra cost.
Get Best Quote Request Callback
Nickel 200 Pipe

Nickel 200 Pipe

Product Price: Rs 300 / KGSGet Best Price

Product Details:
Steel GradeNickel 200
Tensile Strength67000 Psi
Elongation45%
Density8.9 g/cm3
Yield Strength21500 Psi
Size/Diameter15"NB
BrandMPJ
MaterialNickel

M P Jain Tubing Solution offers a wide array of Nickel Alloy 200 Pipe to the valued customers, which are strengthened wrought materials. These Pipes are a commercially pure nickel that exhibits good corrosion resistance. Nickel 200 Pipes are a commercially pure nickel that exhibits good corrosion resistance and has rather low electrical resistivity. These UNS N02200 Nickel 200 EFW Pipes are also being offered in different sizes and shapes to our customers. M P Jain Tubing Solution is specialized in manufacturing house of these quality Nickel 200 welded Pipes, which is a modification to control carbon which keeps it from being embrittled by inter – granular precipitates at temp. Of 600 Degree F - 1400 Degree F in various processes. Werkstoff Number 2.4066 round Nickel Pipes are solid solution strengthened, commercially pure wrought materials with good mechanical properties over a wide range of temperatures and excellent resistance to many corrosives, in particular hydroxides. Nickel 200 pipe is normally limited to those applications where the temperatures settings remain below 600° F. At higher temperatures, say beyond a temperature of 600° F, Nickel 200 products such as Nickel DIN NR. 2.4066 Pipe can suffer from graphitization.


200 Nickel Alloy Pipes Chemical Composition:

Nickel 200

Ni

C

Mo

Mn

Si

Fe

P

S

Cu

Cr

99.0 min

0.15 max

0.35 max

0.1 max

0.4 max

0.01 max

0.25 max


Nickel Alloy 200 Pipe Mechanical Properties:

Density

Melting Point

Yield Strength (0.2%Offset)

Tensile Strength

Elongation

8.9 g/cm3

1446 °C (2635 °F)

Psi – 21500 , MPa – 148

Psi – 67000 , MPa – 462

45 %


Equivalent Grades for 200 Nickel Pipe:

STANDARD

UNS

WERKSTOFF NR.

AFNOR

EN

JIS

BS

GOST

Nickel 200

N02200

2.4066

N-100M

Ni 99.2

NW 2200

NA 11

????-2




Additional Information:

  • Packaging Details: ASTM A269 TP304 Seamless Tubes are surface wash and clean to remove all impurities and stock in the warehouse. Then it is wrapped in thin plastic and also it ends are protected by plastic caps to avoid any damage in transit. Stainless Steel 304 Seamless Tube is bundled in bubble wrap followed by assorting them in colored plastic bundles. An outer rope is tied to protect the tubing and they are packed in wooden box or container. M P Jain Provide Stainless Steel 304 Seamless Tube and SS 304 Seamless Tubes with all necessary documents such as commercial invoice, packing list, Test Reports, HS Code, Country of Origin attested by the chamber of commerce, Fumigation Certificate, Warranty Letter, and Base Material Certificates. Every lot is supplied with a material test certificate as per EN 10204 NACE 3.1 standards indicating the chemical and mechanical properties of the Instrumentation Tubes. We also confirm the guarantee of the seamless tubes supplied as per Purchase order specifications and attest the same in the Material Test Certificate. We also welcome any third party inspection from an agency nominated by the customer to comply with NACE 3.2 Certification if required by the customer at an extra cost.
Get Best Quote Request Callback
Nickel 201 Tube

Nickel 201 Tube

Product Price: Rs 250 / KilogramGet Best Price

Product Details:
MaterialNickel
Steel GradeNickel 201
Elongation45%
Density8.9 g/cm3
BrandMPJ
ShapeRound
Outer Diameter50.8 mm
Thickness3 mm

M P Jain Tubing Solutions is one of the major Manufacturer & Supplier of Nickel 201 Tube. We are Largest Stockist, Stockholder of Nickel UNS N02201 Tubing. The Nickel 201 Tubing is made up of 99.96 % pure nickel alloy which gives a polished look to the tubes. Nickel 201 Tube is a pure nickel product that displays excellent corrosion resistance and has a low electrical resistivity. They are popular for their excellent alkaline media resistance. It is widely used in corrosion related areas or where corrosion is concerned with, such as handling synthetic fibre, food or caustic alkalies. The advantage of using nickel Nickel 201 Seamless Tube is its strength, weldability, and formability. Low in Carbon content, our Nickel Alloy 201 Seamless Tubing are most recommended for high-temperature applications and are resistant to the effects of a host of alkalines and acids except sulphuric compounds. Nickel 201 Tube is approved for service up to 1230° F. Melting point of Nickel 201 Seamless Tube is 2615-2635° F. Nickel 201 Tube is one of the world’s toughest material and imparts a number of advantages to this alloy. Because of Nickel 201 Seamless Tubing improved ductility and resistance to graphitisation these Alloy 201 Tubing are used for caustic evaporators, combustion boats, plater bars and electrical components. Nickel 201 Tubing is designated as UNS N02201 and Werkstoff Number 2.4068.

201 Nickel Alloy Tube Chemical Composition:

Grade

C

Mn

Si

S

Cu

Fe

Ni

Cr

Nickel 201

0.15 max

0.35 max

0.35 max

0.01 max

0.25 max

0.40 max

99.0 min

Nickel 201 Tubing Mechanical Properties:

Element

Density

Melting Point

Tensile Strength

Yield Strength (0.2%Offset)

Elongation

Nickel 201

8.9 g/cm3

1446 °C (2635 °F)

Psi – 67000 , MPa – 462

Psi – 21500 , MPa – 148

45 %

Equivalent Grades for 201 Nickel Tubes:

STANDARD

WERKSTOFF NR.

UNS

JIS

BS

GOST

AFNOR

EN

Nickel 201

2.4068

N02201

NW 2201

NA 12

????-2

LC-Ni 99



Additional Information:

  • Pay Mode Terms: T/T (Bank Transfer)
  • Packaging Details: Nickel 201 Tube are surface wash and clean to remove all impurities and stock in the warehouse. Then it is wrapped in thin plastic and also it ends are protected by plastic caps to avoid any damage in transit. Nickel 201 Tube is bundled in bubble wrap followed by assorting them in colored plastic bundles. An outer rope is tied to protect the tubing and they are packed in wooden box or container. M P Jain Provide Nickel 201 Tube with all necessary documents such as commercial invoice, packing list, Test Reports, HS Code, Country of Origin attested by the chamber of commerce, Fumigation Certificate, Warranty Letter, and Base Material Certificates. Every lot is supplied with a material test certificate as per EN 10204 NACE 3.1 standards indicating the chemical and mechanical properties of the Instrumentation Tubes. We also confirm the guarantee of the Nickel 201 Tube supplied as per Purchase order specifications and attest the same in the Material Test Certificate. We also welcome any third party inspection from an agency nominated by the customer to comply with NACE 3.2 Certification if required by the customer at an extra cost.
Get Best Quote Request Callback
Nickel Tubes

Nickel Tubes

Product Price: Rs 350 / KgGet Best Price

Product Details:
MaterialNickel
TechniqueSeamless
Steel GradeNickel 201
Elongation45%
BrandMPJ
Outer Diameter50.8 mm
Wall Thickness6 mm

M P Jain Tubing Solutions has emerged as a prominent supplier, trader and manufacturer of Nickel Tubes in a wide array.  Nickel (UNS N02200) TUBE is normally limited to service at temperatures below 600 Degree F. At higher temperatures, Nickel 200 Seamless Tubes can suffer from graphitization which can result in severely compromised properties. When operating temperatures are expected to exceed 600 Degree F, carbon content in Nickel Tubes becomes critical. The lower carbon content of Nickel 200 Tubes makes the material resistant to graphitization and therefore less subject to embrittlement. Nickel Welded 201 Tubes, which has exceptional resistance to caustic alkalis at various temperatures and concentrations. At higher temperatures, these Nickel 201 Seamless Tubes can suffer from graphitization which can result in severely compromised properties.


Nickel Tube Chemical Composition:

Grade

C

Mn

Si

S

Cu

Fe

Ni

Cr

Nickel 200

0.15 max

0.35 max

0.35 max

0.01 max

0.25 max

0.40 max

99.0 min

Nickel 201

0.15 max

0.35 max

0.35 max

0.01 max

0.25 max

0.40 max

99.0 min


Nickel Tubing Mechanical Properties:

Element

Density

Melting Point

Tensile Strength

Yield Strength (0.2%Offset)

Elongation

Nickel 200

8.9 g/cm3

1446 °C (2635 °F)

Psi – 67000 , MPa – 462

Psi – 21500 , MPa – 148

45 %

Nickel 201

8.9 g/cm3

1446 °C (2635 °F)

Psi – 67000 , MPa – 462

Psi – 21500 , MPa – 148

45 %


Equivalent Grades for Nickel Tubes:

STANDARD

WERKSTOFF NR.

UNS

JIS

BS

GOST

AFNOR

EN

Nickel 200

2.4066

N02200

NW 2200

NA 11

????-2

N-100M

Ni 99.2

Nickel 201

2.4068

N02201

NW 2201

NA 12

????-2

LC-Ni 99



Additional Information:

  • Packaging Details: Nickel Tubes are surface wash and clean to remove all impurities and stock in the warehouse. Then it is wrapped in thin plastic and also it ends are protected by plastic caps to avoid any damage in transit. Nickel Tubes is bundled in bubble wrap followed by assorting them in colored plastic bundles. An outer rope is tied to protect the tubing and they are packed in wooden box or container. M P Jain Provide Nickel Tubes with all necessary documents such as commercial invoice, packing list, Test Reports, HS Code, Country of Origin attested by the chamber of commerce, Fumigation Certificate, Warranty Letter, and Base Material Certificates. Every lot is supplied with a material test certificate as per EN 10204 NACE 3.1 standards indicating the chemical and mechanical properties of the Instrumentation Tubes. We also confirm the guarantee of the Nickel Tubes supplied as per Purchase order specifications and attest the same in the Material Test Certificate. We also welcome any third party inspection from an agency nominated by the customer to comply with NACE 3.2 Certification if required by the customer at an extra cost.
Get Best Quote Request Callback
Nickel 200 Tube

Nickel 200 Tube

Product Price: Rs 275 / KgGet Best Price

Product Details:
MaterialNickel
Steel GradeNickel 200
Tensile Strength67000 Psi
Elongation45%
Density8.9 g/cm3
Yield Strength21500 Psi
BrandMPJ
Outer Diameter50.8 mm
Thickness3 mm

As a much-admired organization in the market, we as M P Jain tubing solutions are quite engaged in proposing a collection of nickel alloy 200 tubes as an exporter, manufacturer, supplier, and stockiest to our worldwide clients at reasonably priced costs. Nickel 200 tubing is commercially pure or CP wrought nickel grade. Nickel worst-off NR. 2.4066 tubing has a number of useful characteristics, some of which include good ductility and mechanical properties. Adding chromium, molybdenum, copper and other elements to these nickel 200 tubes gives them an even higher resistance to oxidation and corrosion which makes it possible to use them in a wider range of applications. Nickel UNS N02200 tubes are excellent for heat exchangers in the chemical processing and nuclear industries. Meanwhile, we as well offer these WNR 2.4066 tubes in customized thicknesses and sizes as per the precise requirements given by our valuable customers in international quality of standards.


Equivalent Grades for 200 Nickel Tubes:

STANDARD

WERKSTOFF NR.

UNS

JIS

BS

GOST

AFNOR

EN

Nickel 200

2.4066

N02200

NW 2200

NA 11

????-2

N-100M

Ni 99.2


200 Nickel Tube Chemical Composition:

Grade

C

Mn

Si

S

Cu

Fe

Ni

Cr

Nickel 200

0.15 max

0.35 max

0.35 max

0.01 max

0.25 max

0.40 max

99.0 min


Nickel 200 Tubing Mechanical Properties:

Element

Density

Melting Point

Tensile Strength

Yield Strength (0.2%Offset)

Elongation

Nickel 200

8.9 g/cm3

1446 °C (2635 °F)

Psi – 67000 , MPa – 462

Psi – 21500 , MPa – 148

45 %



Additional Information:

  • Packaging Details: Nickel 200 Tube are surface wash and clean to remove all impurities and stock in the warehouse. Then it is wrapped in thin plastic and also it ends are protected by plastic caps to avoid any damage in transit. Nickel 200 Tube is bundled in bubble wrap followed by assorting them in colored plastic bundles. An outer rope is tied to protect the tubing and they are packed in wooden box or container. M P Jain Provide Nickel 200 Tube with all necessary documents such as commercial invoice, packing list, Test Reports, HS Code, Country of Origin attested by the chamber of commerce, Fumigation Certificate, Warranty Letter, and Base Material Certificates. Every lot is supplied with a material test certificate as per EN 10204 NACE 3.1 standards indicating the chemical and mechanical properties of the Instrumentation Tubes. We also confirm the guarantee of the Nickel 200 Tube supplied as per Purchase order specifications and attest the same in the Material Test Certificate. We also welcome any third party inspection from an agency nominated by the customer to comply with NACE 3.2 Certification if required by the customer at an extra cost.
Get Best Quote Request Callback
Nickel Alloy Pipes

Nickel Alloy Pipes

Product Price: Rs 300 / KgGet Best Price

Product Details:
Single Piece Length6 meter
MaterialNickel Alloy
GradeNickel 200
Size150"NB
Elongation45%
Density8.9 g/cm3
Tensile Strength67000 Psi

M P Jain Tubing Solution has emerged as a prominent manufacturer, supplier & Exporter of Nickel Alloy Pipes in a wide array. We also offer these products in different grades such as Nickel 200 Pipes & Nickel 201 Pipes. Nickel EFW Pipes also has some excellent features to offer such as lightweight, tough construction, dimensionally accurate, and more. Meanwhile, highly experienced and trained professionals are hired by us to manufacture the offered range of these Nickel ERW Pipes. Nickel 201 Square Pipes is preferred to Nickel 200 Square Pipes above 600 Degree F (315 Degree C), because of its better resistance to “creep.” Nickel 201 Rectangular Pipes is similar to Nickel 200 Rectangular Pipes and is a low carbon modification of the latter. Nickel 201 Electropolish Pipes is a low carbon modification of Nickel 200 Pipes that has found applications in the electronic industry at temperatures up to 1200 Degree F (649 Degree C). Nickel Hexagonal Pipes is approved for service up to 1230 Degree F. Nickel Hallow Pipes can be easily welded and processed by standard shop fabrication practices.


Nickel Pipe Chemical Composition:

Grade

C

Mn

Si

S

Cu

Fe

Ni

Cr

Nickel 200

0.15 max

0.35 max

0.35 max

0.01 max

0.25 max

0.40 max

99.0 min

Nickel 201

0.15 max

0.35 max

0.35 max

0.01 max

0.25 max

0.40 max

99.0 min


Nickel Pipe Mechanical Properties:

Element

Density

Melting Point

Tensile Strength

Yield Strength (0.2%Offset)

Elongation

Nickel 200

8.9 g/cm3

1446 °C (2635 °F)

Psi – 67000 , MPa – 462

Psi – 21500 , MPa – 148

45 %

Nickel 201

8.9 g/cm3

1446 °C (2635 °F)

Psi – 67000 , MPa – 462

Psi – 21500 , MPa – 148

45 %


Equivalent Grades for Nickel Pipes:

STANDARD

WERKSTOFF NR.

UNS

JIS

BS

GOST

AFNOR

EN

Nickel 200

2.4066

N02200

NW 2200

NA 11

????-2

N-100M

Ni 99.2

Nickel 201

2.4068

N02201

NW 2201

NA 12

????-2

LC-Ni 99



Additional Information:

  • Packaging Details: Nickel Pipe are surface wash and clean to remove all impurities and stock in the warehouse. Then it is wrapped in thin plastic and also it ends are protected by plastic caps to avoid any damage in transit. Nickel Pipe is bundled in bubble wrap followed by assorting them in colored plastic bundles. An outer rope is tied to protect the tubing and they are packed in wooden box or container. M P Jain Provide Nickel Pipe with all necessary documents such as commercial invoice, packing list, Test Reports, HS Code, Country of Origin attested by the chamber of commerce, Fumigation Certificate, Warranty Letter, and Base Material Certificates. Every lot is supplied with a material test certificate as per EN 10204 NACE 3.1 standards indicating the chemical and mechanical properties of the Instrumentation Tubes. We also confirm the guarantee of the Nickel Pipe supplied as per Purchase order specifications and attest the same in the Material Test Certificate. We also welcome any third party inspection from an agency nominated by the customer to comply with NACE 3.2 Certification if required by the customer at an extra cost.
Get Best Quote Request Callback

EXPLORE MORE CATEGORIES

Looking For "Nickel Alloy Pipes And Tubes"?
Thank you Your Enquiry has been sent successfully.
© M P Jain Tubing Solutions LLP. All Rights Reserved (Terms of Use)Developed and managed by IndiaMART InterMESH Ltd.