Call 08048600090 86% Response Rate

Send Email

Inconel Pipes And Tubes

Leading Manufacturer of inconel tube, inconel pipe, inconel 600 tube, inconel tubes, inconel pipes and inconel 800ht tubes from Mumbai.
Inconel Tube

Inconel Tube

Product Price: Rs 1,200 / KilogramGet Best Price

Product Details:
MaterialInconel
Usage/ApplicationIndustrial Usage
BrandM P Jain
StandardASTM-B-163
ShapeRound
Wall thicknes0.250"
Steel GradeInconel 600
Product Description:
  • Domestic & international distributor hard to obtain alloys, titanium, high temperature alloys, nickel & nickel alloys, stainless steel, Monel, Tungsten & other metals. All grades standard & exotic metals include: billets, rods, bars, tubing, pipe, sheet, plate & strip wire. pressures & types of fittings & flanges such as butt-weld fittings, pressure fittings, forged steel pipe fittings & various flanges. Materials fully certified to all specs.
  • We can provide you with the most efficient and effective processes for procuring the highest quality nickel, nickel alloy and stainless piping products in wrought and cast materials in our industry. We maintain a comprehensive stock of piping materials made from Nickel 200/201, Inconel,Incoloy, Monel, Alloy 20, Hastelloy and Duplex SS. Additionally, we maintain a stock of the complementary fittings(including 180 Degree return bends) and flanges in the aforementioned alloy grades.
  • In conjunction to the products we inventory, we have the capability to provide custom fabricated components made from nickel, nickel alloy and stainless steel piping materials Domestic & international distributor hard to obtain alloys, titanium, high temperature alloys, nickel & nickel alloys, stainless steel, Monel, Tungsten & other metals.
  • All grades standard & exotic metals include: billets, rods, bars, tubing, pipe, sheet, plate & strip wire. pressures & types of fittings & flanges such as butt-weld fittings, pressure fittings, forged steel pipe fittings & various flanges. Materials fully certified to all specs.

Specifications:
  • Inconel 600: AMS 5580, ASTM-B-163, B-167, MIL-T-7840
  • Inconel 625: ASTM-B-444
  • Inconel 718: AMS 5589, AMS 5590
  • Inconel 800, Incoloy 800: ASTM-B-163, ASTM-B-407, ASTM-B-514
  • Inconel 825, Incoloy 825: ASTM-B-163, ASTM-B-423, UNS N08825
  • Inconel Tubing Stock Size: OD 1/16"~4",
  • Wall: 0.010"~0.250",
  • Length: As per customers requirement.

Inconel Tubing Specifications:
  • ASTM-B-163, ASME SB163, ASTM-B-165, ASME SB165, ASTM-B-167, ASME SB167, ASTM-B-444, ASME SB444


Additional Information:

  • Pay Mode Terms: T/T (Bank Transfer)
  • Port of Dispatch: JNPT
  • Delivery Time: READY STOCK
Get Best Quote Request Callback
Inconel Pipe

Inconel Pipe

Product Price: Rs 1,800 / KilogramGet Best Price

Product Details:
MaterialInconel
Size/Diameter4 Inch
ApplicationChemical Handling
Single Piece Length18 meter
ShapeRound
FinishBright or Mill Finish
GradeInconel 825
We offer a wide range of Inconel Pipes and inconel pipes fittings made of qualitative raw material procured from reliable vendors. Known for its high quality, durability and high utility these inconel pipes are widely used in various industries across the globe.

Grades:

  • ASTM / ASME UNS 6600 INCONEL 600 Pipes
  • ASTM / ASME UNS 6601 INCONEL 601 Pipes
  • ASTM / ASME UNS 6625 INCONEL 625 Pipes
  • ASTM / ASME UNS 7718 INCONEL 718 Pipes
  • ASTM / ASME UNS 7751 INCONEL X-750 Pipes
  • ASTM / ASME UNS 8800 INCONEL 800 Pipes
  • ASTM / ASME UNS 8810/11 INCOLOY 800H Pipes
  • ASTM / ASME UNS 8825 INCOLOY 825 Pipes


Inconel Alloy Pipes Type:

  • Seamless / ERW / Welded/ Fabricated

Inconel Alloy Pipes Form:
  • Round, Square, Rectangular, Hydraulic Etc.


Length:

  • Single Random, Double Random & Cut Length


End:

  • Plain End, Beveled End, Threaded


Additional Information:

  • Pay Mode Terms: T/T (Bank Transfer)
  • Port of Dispatch: JNPT
  • Delivery Time: READY STOCK
Get Best Quote Request Callback
Inconel 600 Tube

Inconel 600 Tube

Product Price: Rs 600 / KilogramGet Best Price

Product Details:
MaterialInconel
BrandMPJ
GradeInconel 600
ShapeRound
Tensile Strength95000 Psi
EndPlain End
Country of OriginMade in India
Thickness3 mm
Outer Diameter50.8 mm

M P Jain Tubing Solutions offers Inconel 600 tube in a range of gauges to meet any application or performance requirements. Inconel 600 seamless tube is a nickel chromium alloy with decent corrosion resistance at extraordinary temperatures and resistance to chloride ion pressure corrosion fast, corrosion by great purity water and destructive. Similarly if we talk about Alloy 600 Seamless Tube so it is almost similar in all features of the seamless tubes which have discussed. There also have some great specifications, types and dimensions of Inconel 600 seamless tube such as ERW, Welded, and fabricated. Inconel 600 is basically a chromium-nickel alloy that is used for various types of applications that require high corrosion and temperature resistance. This chromium and nickel-based alloy are mainly designed for the temperature from cryogenic to an extreme temperature up to nickel 2000 deg F. It is a non-magnetic alloy and has excellent mechanical properties. The alloy has good strength and weldability at a wide range of environments and temperatures.


Equivalent Grades for 600 Inconel Tubes:

STANDARD

WERKSTOFF NR.

UNS

JIS

BS

 

GOST

AFNOR

EN

Inconel 600

2.4816

N06600

NCF 600

NA 13

 

?????????? 28-2,5-1,5

NC15FE11M

NiCr15Fe

600 Inconel Alloy Tube Chemical Composition:

Grade

C

Mn

Si

S

Cu

Fe

Ni

Cr

Inconel 600

0.15 max

1.00 max

0.50 max

0.015max

0.50 max

6.00 – 10.00

72.00 min

14.00 – 17.00


Inconel 600 Tubing Mechanical Properties:

Element

Density

Melting Point

Tensile Strength

Yield Strength (0.2%Offset)

Elongation

Inconel 600

8.47 g/cm3

1413 °C (2580 °F)

Psi – 95,000 , MPa – 655

Psi – 45,000 , MPa – 310

40 %




Additional Information:

  • Packaging Details: Inconel 600 Tubes are surface wash and clean to remove all impurities and stock in the warehouse. Then it is wrapped in thin plastic and also it ends are protected by plastic caps to avoid any damage in transit. Inconel 600 Tubes is bundled in bubble wrap followed by assorting them in colored plastic bundles. An outer rope is tied to protect the tubing and they are packed in wooden box or container. M P Jain Provide Inconel 600 Tubes with all necessary documents such as commercial invoice, packing list, Test Reports, HS Code, Country of Origin attested by the chamber of commerce, Fumigation Certificate, Warranty Letter, and Base Material Certificates. Every lot is supplied with a material test certificate as per EN 10204 NACE 3.1 standards indicating the chemical and mechanical properties of the Instrumentation Tubes. We also confirm the guarantee of the Inconel 600 Tubes supplied as per Purchase order specifications and attest the same in the Material Test Certificate. We also welcome any third party inspection from an agency nominated by the customer to comply with NACE 3.2 Certification if required by the customer at an extra cost.
Get Best Quote Request Callback
Inconel Tubes

Inconel Tubes

Product Price: Rs 300 / PCSGet Best Price

Product Details:
Material GradeInconel 601
MaterialInconel
Usage/ApplicationChemical Handling
BrandMPJ
ShapeRound
Pipe TypeSeamless
Length TypeCut Length
Outer Diameter50.8 mm
Thickness3 mm

M P offers a wide range of Inconel Tubes, which is readily brake or roll formed into a variety of parts for applications in the industrial, architectural, and transportation fields. Inconel 600 Tubes is a nickel – chromium alloy with good oxidation resistance at high temperatures and resistance to chloride – ion stress – corrosion cracking, corrosion by high – purity water, and caustic corrosion. Inconel 625 Welded Tubes has excellent weldability, where service temperatures range from cryogenic to 1800 Degree F. The outstanding strength and toughness. We have experience serving the needs of customers for Inconel Seamless Tubes in diverse markets including aerospace, aircraft, food service, automotive, medical, house – wares, and many others.


Inconel Tube Chemical Composition:

Grade

C

Mn

Si

S

Cu

Fe

Ni

Cr

Inconel 600

0.15 max

1.00 max

0.50 max

0.015max

0.50 max

6.00 – 10.00

72.00 min

14.00 – 17.00

Inconel 601

0.10 max

1.00 max

0.50 max

0.015max

1.0 max

balance

58.0 – 63.0

21.0 – 25.0

Inconel 625

0.10max

0.50 max

0.50 max

0.015max

5.0 max

58.0 min

20.0 – 23.0

Inconel 718

0.08 max

 

0.35 max

0.35 max

0.015max

0.30 max

50.00 – 55.00

17.00 – 21.0


Inconel Tubing Mechanical Properties:

Element

Density

Melting Point

Tensile Strength

Yield Strength (0.2%Offset)

Elongation

Inconel 600

8.47 g/cm3

1413 °C (2580 °F)

Psi – 95,000 , MPa – 655

Psi – 45,000 , MPa – 310

40 %

Inconel 601

8.1 g/cm3

1411 °C (2571 °F)

Psi – 80,000 , MPa – 550

Psi – 30,000 , MPa – 205

30 %

Inconel 625

8.4 g/cm3

1350 °C (2460 °F)

Psi – 1,35,000 , MPa – 930

Psi – 75,000 , MPa – 517

42.5 %

Inconel 718

8.2 g/cm3

1350 °C (2460 °F)

Psi – 1,35,000 , MPa – 930

Psi – 75,000 , MPa – 482

45 %




Additional Information:

  • Packaging Details: Inconel Tubes are surface wash and clean to remove all impurities and stock in the warehouse. Then it is wrapped in thin plastic and also it ends are protected by plastic caps to avoid any damage in transit. Inconel Tubes is bundled in bubble wrap followed by assorting them in colored plastic bundles. An outer rope is tied to protect the tubing and they are packed in wooden box or container. M P Jain Provide Inconel Tubes with all necessary documents such as commercial invoice, packing list, Test Reports, HS Code, Country of Origin attested by the chamber of commerce, Fumigation Certificate, Warranty Letter, and Base Material Certificates. Every lot is supplied with a material test certificate as per EN 10204 NACE 3.1 standards indicating the chemical and mechanical properties of the Instrumentation Tubes. We also confirm the guarantee of the Inconel Tubes supplied as per Purchase order specifications and attest the same in the Material Test Certificate. We also welcome any third party inspection from an agency nominated by the customer to comply with NACE 3.2 Certification if required by the customer at an extra cost.
Get Best Quote Request Callback
Inconel Pipes

Inconel Pipes

Product Price: Rs 100 / PieceGet Best Price

Product Details:
Material GradeInconel 925
MaterialInconel
Size/Diameter150"NB
BrandMPJ
StandardASTM
Usage/ApplicationChemical Handling
Pipe TypeLSAW Pipes

M P Jain Tubing Solution offers a wide range of Inconel Pipes, where it is extensively demanded amongst the customers due to its various uses. We also delivered quality assured services. We also offer these products in different grades such as Inconel 600 Pipes, Inconel 601 Pipes, Inconel 625 Pipes, Inconel 800 Pipes, Incoloy 800H Pipes, Incoloy 800HT Pipes, Incoloy 825 Pipes, Incoloy 925 Pipes, Inconel 718 Pipes, and Incoloy 330 Pipes. Meanwhile, these Inconel Seamless Pipes are also being offered in different sizes and shapes to our customers, where our entire product range is used in varied industrial sectors. Generally, the corrosion resistance of Inconel Welded Pipes is very good in reducing environments, but poor in oxidizing conditions. Inconel EFW Pipes is not useful in oxidizing acids, such as nitric acid and nitrous. Nevertheless, Inconel ERW Pipes is resistant to most alkalis, salts, waters, food products, organic substances and atmospheric conditions at normal and elevated temperatures. Inconel EFW Pipes has good oxidation resistance in intermittent service to 870 Degree C and in continuous service to 925 Degree C.

600 Inconel Alloy Pipes Chemical Composition:

Grade

C

Mn

Si

Fe

S

Cr

Cu

Ni

600

min.

6.0

14.0

72.0

max.

0.15

1.0

0.5

10.0

0.015

17.0

0.5

601

min.

Bal

21.0

58.0

max.

0.10

1.0

0.5

Bal

0.015

25.0

1.0

63.0


Inconel Alloy 600 Pipe Mechanical Properties:

Grade

Tensile Strength (MPa) min

Yield Strength 0.2% Proof (MPa) min

Elongation (% in 50mm) min

600

Psi – 95,000 , MPa -655

Psi – 45,000 , MPa – 310

40

601

Psi – 95,000 , MPa -655

Psi – 45,000 , MPa – 310

40



Additional Information:

  • Packaging Details: Inconel Pipes are surface wash and clean to remove all impurities and stock in the warehouse. Then it is wrapped in thin plastic and also it ends are protected by plastic caps to avoid any damage in transit. Inconel Pipes is bundled in bubble wrap followed by assorting them in colored plastic bundles. An outer rope is tied to protect the tubing and they are packed in wooden box or container. M P Jain Provide Inconel Pipes with all necessary documents such as commercial invoice, packing list, Test Reports, HS Code, Country of Origin attested by the chamber of commerce, Fumigation Certificate, Warranty Letter, and Base Material Certificates. Every lot is supplied with a material test certificate as per EN 10204 NACE 3.1 standards indicating the chemical and mechanical properties of the Instrumentation Tubes. We also confirm the guarantee of the Inconel Pipes supplied as per Purchase order specifications and attest the same in the Material Test Certificate. We also welcome any third party inspection from an agency nominated by the customer to comply with NACE 3.2 Certification if required by the customer at an extra cost.
Get Best Quote Request Callback
Inconel 800HT Tubes

Inconel 800HT Tubes

Product Price: Rs 350 / KGSGet Best Price

Product Details:
Material GradeInconel 800HT
MaterialInconel
BrandMPJ
StandardAPI
Elongation30%
Tensile Strength75000 Psi
Usage/ApplicationChemical Handling

M P Jain Tubing Solution is the prime manufacturer and supplier of the Incoloy 800/800h/800ht Pipes & Tubes. Incoloy 800/800h/800ht is a nickel-iron-chromium alloy which is known for its good strength as well as excellent resistance to carburization and oxidation in elevated temperature environment. The nickel steel alloy is similar except for the high level of carbon in 800 H and the addition of 1.20% aluminum and titanium in 800 Ht. Incoloy 800 was modified to 800H to control carbon as well as grain size. This helped in optimizing the stress rupture properties. It is further modified to 800 Ht and titanium and aluminum is combined to offer high-temperature properties. The nickel content of this alloy offers resistance to chloride stress corrosion cracking and embrittlement from precipitation. The general resistance to corrosion of this alloy is also excellent. It shows superior creep strength. It is used in an application where temperature requirement is up to 110 degrees F. Incoloy 800/800h/800ht Tubes also show resistance to oxidation as well as nitriding atmosphere.

 
800 / 800H / 800HT Inconel Tube Chemical Composition:

Grade

C

Mn

Si

S

Cu

Fe

Ni

Cr

Al

Ti

800

0.10 max

1.50 max

1.00 max

0.015 max

0.75 max

39.50 min

30.00 – 35.00

19.00 – 23.00

0.15 – 0.60

0.15 – 0.60

800H

0.05 – 0.10

1.50 max

1.00 max

0.015 max

0.75 max

39.50 min

30.00 – 35.00

19.00 – 23.00

0.15 – 0.60

0.15 – 0.60

800HT

0.06 – 0.10

1.50 max

1.00 max

0.015 max

0.75 max

39.50 min

30.00 – 35.00

19.00 – 23.00

0.15 – 0.60???

0.15 – 0.60???


Incoloy 800 / 800H / 800HT Tubing Mechanical Properties:

Element

Density

Melting Point

Tensile Strength

Yield Strength (0.2%Offset)

Elongation

800 / 800H / 800HT

7.94 g/cm3

1385 °C (2525 °F)

Psi – 75,000 , MPa – 520

Psi – 30,000 , MPa – 205

30 %



Additional Information:

  • Packaging Details: Inconel 800/800H/800HT tube are surface wash and clean to remove all impurities and stock in the warehouse. Then it is wrapped in thin plastic and also it ends are protected by plastic caps to avoid any damage in transit. Inconel 800/800H/800HT tube is bundled in bubble wrap followed by assorting them in colored plastic bundles. An outer rope is tied to protect the tubing and they are packed in wooden box or container. M P Jain Provide Inconel 800/800H/800HT tube with all necessary documents such as commercial invoice, packing list, Test Reports, HS Code, Country of Origin attested by the chamber of commerce, Fumigation Certificate, Warranty Letter, and Base Material Certificates. Every lot is supplied with a material test certificate as per EN 10204 NACE 3.1 standards indicating the chemical and mechanical properties of the Instrumentation Tubes. We also confirm the guarantee of the Inconel 800/800H/800HT tube supplied as per Purchase order specifications and attest the same in the Material Test Certificate. We also welcome any third party inspection from an agency nominated by the customer to comply with NACE 3.2 Certification if required by the customer at an extra cost.
Get Best Quote Request Callback
Inconel 925 tube

Inconel 925 tube

Product Price: Rs 275 / KGSGet Best Price

Product Details:
Material GradeInconel 925
MaterialInconel
BrandM P Jain
StandardASTM
Density8.14 g/cm3
Elongation30%
Thickness3 mm
Outer Diameter50.8 mm

M P Jain Tubing Solutions is a well-known industry in the field of supplying and exporting high-quality Inconel 925 Tubes. We are the biggest importer of all types of industrial products in different standards and specifications. The Inconel 925 tubes have many features like good workability, weldability, formability, fabricability, machinability, etc; therefore, it is used in construction and manufacturing applications. The tubes offer excellent resistance to acids like phosphoric, nitric and sulfide acids in the media atmosphere. It provides excellent resistance corrosion and oxidation in many atmosphere conditions. The tubes have excellent resistance property like resistance to chloride stress and cracking corrosion, resistance to pitting, resistance to crevice and other corrosion too. It has high strength, mechanical property, good ductility, tensile, etc. The addition of titanium, aluminium provides hardness of tubes. They are mainly used to make items for applications that are exposed to salt water, acids, such as sulphuric acid and chloride mainly in petrochemicals, pharmaceutical equipment, food processing, etc.


925 Inconel Alloy Tube Chemical Composition:

Grade

C

Mn

Si

S

Cu

Fe

Ni

Cr

Al

Ti

925

0.03 max

1.00 max

0.05 max

0.03 max

1.50 – 3.00

22.00 min

42.00 – 46.00

19.55 – 22.50

0.01-0.05 max


Incoloy 925 Tubing Mechanical Properties:

Element

Density

Melting Point

Tensile Strength

Yield Strength (0.2%Offset)

Elongation

925

8.14 g/cm3

1343°C

MPa – 650

 MPa – 300

30 %


Equivalent Grades for 925 Incoloy Tubes:

STANDARD

WERKSTOFF NR.

UNS

JIS

Incoloy 925

N09925

NCF 925



Additional Information:

  • Packaging Details: Inconel 925 Tubes are surface wash and clean to remove all impurities and stock in the warehouse. Then it is wrapped in thin plastic and also it ends are protected by plastic caps to avoid any damage in transit. Inconel 925 Tubes is bundled in bubble wrap followed by assorting them in colored plastic bundles. An outer rope is tied to protect the tubing and they are packed in wooden box or container. M P Jain Provide Inconel 925 Tubes with all necessary documents such as commercial invoice, packing list, Test Reports, HS Code, Country of Origin attested by the chamber of commerce, Fumigation Certificate, Warranty Letter, and Base Material Certificates. Every lot is supplied with a material test certificate as per EN 10204 NACE 3.1 standards indicating the chemical and mechanical properties of the Instrumentation Tubes. We also confirm the guarantee of the Inconel 925 Tubes supplied as per Purchase order specifications and attest the same in the Material Test Certificate. We also welcome any third party inspection from an agency nominated by the customer to comply with NACE 3.2 Certification if required by the customer at an extra cost.
Get Best Quote Request Callback
Inconel 825 Tubes

Inconel 825 Tubes

Product Price: Rs 250 / KGSGet Best Price

Product Details:
MaterialInconel
BrandMPJ
GradeInconel 825
ShapeRound
Tensile Strength80000 Psi
Thickness3 mm
Outer Diameter50.8 mm
Pipe TypeERW

M P Jain Tubing Solutions is a prominent supplier of Incoloy 825 Tubes and Tubes, which is classed as a ‘C’ alloy. Incoloy 825 is a nickel-iron-chromium alloy with additions of molybdenum, copper and titanium. The chief characteristic of Incoloy 825 tubing is its corrosion resistance; the alloy was designed with a specific chemical composition that provides exceptional resistance too many corrosive environments such as sulfuric acid, phosphoric acid, sulfur containing flue gases, sour gas and oil wells, and sea water. It is similar to alloy 800 but has improved resistance to aqueous corrosion. It has excellent resistance to both reducing and oxidizing acids, to stress-corrosion cracking, and to localized attack such as pitting and crevice corrosion. Alloy 825 is especially resistant to sulfuric and phosphoric acids. The possession of this resistance to both general and localized corrosion under diverse conditions is what allows this alloy to have a broad usefulness and wide range of applications, many similar to those of Incoloy  20 tubing. Such applications include the handling of radioactive wastes, nuclear fuel reprocessing, pickling operations, acid production, oil and gas recovery, pollution control and chemical processing. This alloy offers exceptional resistance to corrosion by sulfuric and phosphoric acids and is often the most cost effective alloy in sulfuric acid service. Aiding resistance to pitting and crevice corrosion is one of the chief benefits of the molybdenum.


825 Inconel Tube Chemical Composition:

Grade

C

Mn

Si

S

Cu

Fe

Ni

Cr

Al

Ti

825

0.05 max

1.00 max

0.05 max

0.03 max

1.50 – 3.00

22.00 min

38.00 – 46.00

19.50 – 23.50

0.02 max

0.06 – 1.20


Incoloy 825 Tubing Mechanical Properties:

Element

Density

Melting Point

Tensile Strength

Yield Strength (0.2%Offset)

Elongation

825

8.14 g/cm3

1400 °C (2550 °F)

Psi – 80,000 , MPa – 550

Psi – 32,000 , MPa – 220

30 %


Equivalent Grades for 825 Incoloy Tubes:

STANDARD

WERKSTOFF NR.

UNS

JIS

BS

GOST

AFNOR

EN

OR

Incoloy 825

2.4858

N08825

NCF 825

NA 16

????703

NFE30C20DUM

NiCr21Mo

XH38BT




Additional Information:

  • Packaging Details: Inconel 825 Tubes are surface wash and clean to remove all impurities and stock in the warehouse. Then it is wrapped in thin plastic and also it ends are protected by plastic caps to avoid any damage in transit. Inconel 825 Tubes is bundled in bubble wrap followed by assorting them in colored plastic bundles. An outer rope is tied to protect the tubing and they are packed in wooden box or container. M P Jain Provide Inconel 825 Tubes with all necessary documents such as commercial invoice, packing list, Test Reports, HS Code, Country of Origin attested by the chamber of commerce, Fumigation Certificate, Warranty Letter, and Base Material Certificates. Every lot is supplied with a material test certificate as per EN 10204 NACE 3.1 standards indicating the chemical and mechanical properties of the Instrumentation Tubes. We also confirm the guarantee of the Inconel 825 Tubes supplied as per Purchase order specifications and attest the same in the Material Test Certificate. We also welcome any third party inspection from an agency nominated by the customer to comply with NACE 3.2 Certification if required by the customer at an extra cost.
Get Best Quote Request Callback
Inconel 718 tube

Inconel 718 tube

Product Price: Rs 10 / PieceGet Best Price

Product Details:
MaterialInconel
BrandMPJ
Outside Diameter254 mm OD
Material GradeInconel 718
Usage/ApplicationChemical Handling
StandardASTM
Thickness50.8 mm

M P Jain Tubing Solution is the leading Manufacturers, Supplier and Exporters of high quality Inconel 718 Tubes using high quality raw materials. Inconel 718 tube is an age-hardenable nickel-chromium-iron alloy also containing significant amounts of niobium, molybdenum, titanium and aluminum. It combines good corrosion resistance with extremely high strength. Inconel 718 Welded tubes is a nickel – chromium – molybdenum alloy designed to resist a wide range of severely corrosive environments, pitting and crevice corrosion. These Inconel 718 Tubes are widely used in various applications industry like oil and gas, petrochemical, medicine, food, paper, machinery, natural gas etc. Other uses of WNR 2.4668 Tubes are in jet rockets, nuclear fuel, and pump body components. 


718 Inconel Alloy Tube Chemical Composition:

Grade

C

Mn

Si

S

Cu

Fe

Ni

Cr

Inconel 718

0.08 max

0.35 max

0.35 max

0.015max

0.30 max

50.00 – 55.00

17.00 – 21.00


Inconel 718 Tubing Mechanical Properties:

Element

Density

Melting Point

Tensile Strength

Yield Strength (0.2%Offset)

Elongation

Inconel 718

8.2 g/cm3

1350 °C (2460 °F)

Psi – 1,35,000 , MPa – 930

Psi – 75,000 , MPa – 482

45 %


Equivalent Grades for 718 Inconel  Tubes:

STANDARD

WERKSTOFF NR.

UNS

JIS

BS

GOST

AFNOR

EN

Inconel 718

2.4668

N07718

NCF 718



Additional Information:

  • Packaging Details: Inconel 718 Tubes are surface wash and clean to remove all impurities and stock in the warehouse. Then it is wrapped in thin plastic and also it ends are protected by plastic caps to avoid any damage in transit. Inconel 718 Tubes is bundled in bubble wrap followed by assorting them in colored plastic bundles. An outer rope is tied to protect the tubing and they are packed in wooden box or container. M P Jain Provide Inconel 718 Tubes with all necessary documents such as commercial invoice, packing list, Test Reports, HS Code, Country of Origin attested by the chamber of commerce, Fumigation Certificate, Warranty Letter, and Base Material Certificates. Every lot is supplied with a material test certificate as per EN 10204 NACE 3.1 standards indicating the chemical and mechanical properties of the Instrumentation Tubes. We also confirm the guarantee of the Inconel 718 Tubes supplied as per Purchase order specifications and attest the same in the Material Test Certificate. We also welcome any third party inspection from an agency nominated by the customer to comply with NACE 3.2 Certification if required by the customer at an extra cost.
Get Best Quote Request Callback
Inconel 625 Tube

Inconel 625 Tube

Product Price: Rs 310 / KGSGet Best Price

Product Details:
MaterialInconel
BrandMPJ
GradeInconel 625
ShapeRound
Tensile Strength135000 Psi
Pipe TypeSeamless
Outer Diameter50.8 mm
Thickness3 mm

M P Jain Tubing Solutions offers in a wide range of Inconel 625 Tube is a nickel-chromium alloy with strength and excellent resistance to a wide variety of corrosive media and its typical applications include Heat exchangers, spray bars, rocket thrust chambers. Inconel Alloy 625 UNS N06625 is an austenitic nickel base superalloy known for its high strength at elevated temperatures, outstanding fabricability and excellent resistance to oxidation and corrosion over an extensive range of corrosive conditions. These properties allow Inconel Alloy 625 tubing to be used in a wide spectrum of applications. Excelling in seawater applications such as mooring cables, offshore oil equipment or sheathing for undersea cables, Inconel Alloy 625 W.Nr. 2.4856 tubing shows freedom from local attack (pitting and crevice corrosion), high corrosion-fatigue strength, high tensile strength and resistance to chloride-ion stress-corrosion cracking. The aerospace industry embraces 625 tubing for its high tensile, creep, and rupture strength, fatigue and thermal-fatigue strength, oxidation resistance and excellent weldability, making it a useful material for engine exhaust systems, fuel and hydraulic line tubing, and also heat-exchanger tubing purposes.


625 Inconel Alloy Tube Chemical Composition:

Grade

C

Mn

Si

S

Cu

Fe

Ni

Cr

Inconel 625

0.10max

0.50 max

0.50 max

0.015max

5.0 max

58.0 min

20.0 – 23.0


Inconel 625 Tubing Mechanical Properties:

Element

Density

Melting Point

Tensile Strength

Yield Strength (0.2%Offset)

Elongation

Inconel 625

8.4 g/cm3

1350 °C (2460 °F)

Psi – 1,35,000 , MPa – 930

Psi – 75,000 , MPa – 517

42.5 %


Equivalent Grades for 625 Inconel Seamless and Welded Tubes:

STANDARD

WERKSTOFF NR.

UNS

JIS

BS

GOST

AFNOR

EN

Inconel 625

2.4856

N06625

NCF 625

NA 21

????75????????

NC22DNB4M

NiCr22Mo9Nb



Additional Information:

  • Packaging Details: Inconel 625 Tubes are surface wash and clean to remove all impurities and stock in the warehouse. Then it is wrapped in thin plastic and also it ends are protected by plastic caps to avoid any damage in transit. Inconel 625 Tubes is bundled in bubble wrap followed by assorting them in colored plastic bundles. An outer rope is tied to protect the tubing and they are packed in wooden box or container. M P Jain Provide Inconel 625 Tubes with all necessary documents such as commercial invoice, packing list, Test Reports, HS Code, Country of Origin attested by the chamber of commerce, Fumigation Certificate, Warranty Letter, and Base Material Certificates. Every lot is supplied with a material test certificate as per EN 10204 NACE 3.1 standards indicating the chemical and mechanical properties of the Instrumentation Tubes. We also confirm the guarantee of the Inconel 625 Tubes supplied as per Purchase order specifications and attest the same in the Material Test Certificate. We also welcome any third party inspection from an agency nominated by the customer to comply with NACE 3.2 Certification if required by the customer at an extra cost.
Get Best Quote Request Callback
Inconel 601 Tube

Inconel 601 Tube

Product Price: Rs 250 / KGSGet Best Price

Product Details:
MaterialInconel
BrandMPJ
Outside Diameter254 mm
Size150"NB
Usage/ApplicationChemical Handling
StandardDIN 2.4851
Country of OriginMade in India
Thickness20 mm
Pipe TypeSeamless

M P Jain Tubing Solutions is one of the largest manufacturer, supplier & exporter of Inconel 601 tube. Inconel 601 is a nickel-chromium alloy used for applications that require resistance to corrosion and heat. This nickel alloy stands out due to its resistance to high temperature oxidation, remaining highly resistant to oxidation through 2200° F. Alloy 601 develops a tightly adherent oxide scale which resists spalling even under conditions of severe thermal cycling. This nickel alloy has good high temperature strength, and retains its ductility after long service exposure. It has good resistance to aqueous corrosion, high mechanical strength, and is readily formed, machined and welded. Inconel 601’s properties make it a material of broad utility in fields like thermal processing, chemical processing, pollution control, aerospace, and power generation. However, alloy 601 is not suggested for use in strongly reducing, sulfur bearing environments.


601 Inconel Tubes Equivalent Standard:

STANDARD

UNS

WNR.

AFNOR

EN

JIS

BS

GOST

OR

Alloy 601

N06601

2.4851

NiCr23Fe

NiCr15Fe

NCF 601

NA 49

XH60BT

????868


Inconel 601 Tube Chemical Composition:

Grade

C

Mn

Si

S

Cu

Fe

Ni

Cr

Inconel 601

0.10 max

1.0 max

0.5 max

0.015 max

1.0 max

Balance

58.0 – 63.0

21.0 – 25.0


Inconel 601 Tubing Mechanical Properties:

Density

Melting Point

Tensile Strength

Yield Strength (0.2%Offset)

Elongation

8.1 g/cm3

1411 °C (2571 °F)

Psi – 80,000 , MPa – 550

Psi – 30,000 , MPa – 205

30 %



Additional Information:

  • Packaging Details: Inconel 601 Tubes are surface wash and clean to remove all impurities and stock in the warehouse. Then it is wrapped in thin plastic and also it ends are protected by plastic caps to avoid any damage in transit. Inconel 601 Tubes is bundled in bubble wrap followed by assorting them in colored plastic bundles. An outer rope is tied to protect the tubing and they are packed in wooden box or container. M P Jain Provide Inconel 601 Tubes with all necessary documents such as commercial invoice, packing list, Test Reports, HS Code, Country of Origin attested by the chamber of commerce, Fumigation Certificate, Warranty Letter, and Base Material Certificates. Every lot is supplied with a material test certificate as per EN 10204 NACE 3.1 standards indicating the chemical and mechanical properties of the Instrumentation Tubes. We also confirm the guarantee of the Inconel 601 Tubes supplied as per Purchase order specifications and attest the same in the Material Test Certificate. We also welcome any third party inspection from an agency nominated by the customer to comply with NACE 3.2 Certification if required by the customer at an extra cost.
Get Best Quote Request Callback
Incoloy 800H Pipes

Incoloy 800H Pipes

Product Price: Rs 300 / KGSGet Best Price

Product Details:
GradeInconel 800
MaterialInconel
Size/Diameter15"NB
BrandMPJ
StandardAPI
Elongation30%
Tensile Strength75000 Psi

M P Jain tubing Solution is a well-known manufacturer, exporter and supplier of premium quality Pipes. Incoloy 800 is Nickel and Chromium alloy that has excellent tensile strength and high resistance to oxidation and corrosion. This Incoloy alloy is suitable to use in high temperature and acidic environment. Every grade of Incoloy has unique properties, and hence it is widely demanded by our clients. We offer Pipes in different sizes, grades and diameters as per the requirements of clients. By using excellent quality raw material, we fabricate the highest quality Incoloy 800H Pipes. By following the defined manufacturing process and national as well as international quality standards, we are producing perfectly matching quality Incoloy 800/ 800H/ 800HT Pipes.


Incoloy 800/800H/800HT contains various metals, and therefore it has superior qualities and features which are required in any industrial applications.


Incoloy 800, 800H, 800HT Pipes Chemical Properties:

Grade

C

Mn

Si

S

Cu

Fe

Ni

Cr

Al

Ti

800

0.10 max

1.50 max

1.00 max

0.015 max

0.75 max

39.50 min

30.00 – 35.00

19.00 – 23.00

0.15 – 0.60

0.15 – 0.60

800H

0.05 – 0.10

1.50 max

1.00 max

0.015 max

0.75 max

39.50 min

30.00 – 35.00

19.00 – 23.00

0.15 – 0.60

0.15 – 0.60

800HT

0.06 – 0.10

1.50 max

1.00 max

0.015 max

0.75 max

39.50 min

30.00 – 35.00

19.00 – 23.00

0.15 – 0.60???

0.15 – 0.60???


Incoloy Alloy 800 Pipes Mechanical Properties:

Element

Density

Melting Point

Tensile Strength

Yield Strength (0.2%Offset)

Elongation

800

7.94 g/cm3

1385 °C (2525 °F)

Psi – 75,000 , MPa – 520

Psi – 30,000 , MPa – 205

30 %

800H

7.94 g/cm3

1385 °C (2525 °F)

Psi – 75,000 , MPa – 520

Psi – 30,000 , MPa – 205

30 %

800HT

7.94 g/cm3

1385 °C (2525 °F)

Psi – 75,000 , MPa – 520

Psi – 30,000 , MPa – 205

30 %


Specifications:
  • 15"NB TO 150"NB IN
  • ASTM, ASME and API
  • Single Random, Double Random & Required Length


Additional Information:

  • Packaging Details: Inconel 800/800H/800HT Pipe are surface wash and clean to remove all impurities and stock in the warehouse. Then it is wrapped in thin plastic and also it ends are protected by plastic caps to avoid any damage in transit. Inconel 800/800H/800HT Pipe is bundled in bubble wrap followed by assorting them in colored plastic bundles. An outer rope is tied to protect the tubing and they are packed in wooden box or container. M P Jain Provide Inconel 800/800H/800HT Pipe with all necessary documents such as commercial invoice, packing list, Test Reports, HS Code, Country of Origin attested by the chamber of commerce, Fumigation Certificate, Warranty Letter, and Base Material Certificates. Every lot is supplied with a material test certificate as per EN 10204 NACE 3.1 standards indicating the chemical and mechanical properties of the Instrumentation Tubes. We also confirm the guarantee of the Inconel 800/800H/800HT Pipe supplied as per Purchase order specifications and attest the same in the Material Test Certificate. We also welcome any third party inspection from an agency nominated by the customer to comply with NACE 3.2 Certification if required by the customer at an extra cost.
Get Best Quote Request Callback
Inconel 718 Pipe

Inconel 718 Pipe

Product Price: Rs 310 / KGSGet Best Price

Product Details:
Material GradeInconel 718
Size/Diameter150"NB
Usage/ApplicationFertilizer Plants
BrandMPJ
Elongation30%
Tensile Strength80000 Psi
Yield Strength32000 Psi
MaterialInconel

M P Jain Tubing Solutions is Manufacturer, Supplier & exporter with highest quality corrosion and temperature resistant Inconel 718 Pipe. Inconel 718 Sch 40 pipe is a nickel-chromium-molybdenum super alloy designed for resisting a wide range of severely corrosive environments, crevice corrosion and pitting. Alloy 718 WERKSTOFF NR. 2.4668 Pipe has proven to be a valuable and versatile material that is able to solve a wide variety of design and application problems. Inconel 718 Pipe resists low temperature aggressive corrosion environments, as well as hostile high temperature environments too. This inconel alloy also displays exceptionally high yield, tensile, and creep-rupture properties at high temperatures.  The excellent weldability of the alloy, and its ability to be joined very successfully to other alloys with different compositions. Inconel alloy 718 ASTM B670 Pipe hardened nickel-based alloys and cold-worked solid nickel-based alloys offer many advantages such as high strength, toughness, low magnetic permeability and excellent corrosion resistance.
We supply precision smooth bore Inconel 718 Pipe for marine environments, brackish water, bleaching operations, closed loop water systems and some food processing applications. High-performance nickel alloys for sour oil and gas fields. It is used from cryogenic temperatures up to long term service at 1200° F.


718 Inconel Alloy Pipes Chemical Composition:

Grade

C

Mn

Si

Fe

S

Cr

Al

Ni

718

min.

bal

17.0

0.2

50.0

max.

0.08

0.35

0.35

bal

0.01

21.0

0.8

55.0


Inconel Alloy 718 Pipe Mechanical Properties:

Element

Density

Melting Point

Tensile Strength

Yield Strength (0.2%Offset)

Elongation

825

8.14 g/cm3

1400 °C (2550 °F)

Psi – 80,000 , MPa – 550

Psi – 32,000 , MPa – 220

30 %


Equivalent Grades for 600 Inconel Pipe:

Grade

UNS No

Old British

Euronorm

GOST

Japanese JIS

BS

En

No

AFNOR

Inconel 718

N07718

2.4668




Additional Information:

  • Packaging Details: Inconel 718 pipes are surface wash and clean to remove all impurities and stock in the warehouse. Then it is wrapped in thin plastic and also it ends are protected by plastic caps to avoid any damage in transit. Inconel 718 pipes is bundled in bubble wrap followed by assorting them in colored plastic bundles. An outer rope is tied to protect the tubing and they are packed in wooden box or container. M P Jain Provide Inconel 718 pipes with all necessary documents such as commercial invoice, packing list, Test Reports, HS Code, Country of Origin attested by the chamber of commerce, Fumigation Certificate, Warranty Letter, and Base Material Certificates. Every lot is supplied with a material test certificate as per EN 10204 NACE 3.1 standards indicating the chemical and mechanical properties of the Instrumentation Tubes. We also confirm the guarantee of the Inconel 718 pipes supplied as per Purchase order specifications and attest the same in the Material Test Certificate. We also welcome any third party inspection from an agency nominated by the customer to comply with NACE 3.2 Certification if required by the customer at an extra cost.
Get Best Quote Request Callback
Incoloy 925 Pipe

Incoloy 925 Pipe

Product Price: Rs 315 / KGSGet Best Price

Product Details:
Material GradeInconel 925
MaterialInconel
Size/Diameter15"NB
Usage/ApplicationFertilizer Plants
BrandMPJ
EndPlain End
StandardASTM

Incoloy 925 Pipe is made from common and widely used austenitic steel alloy. It also have titanium in it. This combination in chemical composition gives it a very high level of strength. High-performance nickel alloys for sour oil and gas fields. Incoloy 925 Tubing hardened nickel-based alloys and cold-worked solid nickel-based alloys offer many advantages such as high strength, toughness, low magnetic permeability and excellent corrosion resistance. Incoloy 925 Tubing has proven to be a valuable and versatile material that is able to solve a wide variety of design and application problems.  Incoloy 925 Tubing has the ability to resist low temperature aggressive corrosion environments, as well as hostile high temperature environments. The excellent weldability of the alloy, and its ability to be joined very successfully to other alloys with different compositions. Incoloy alloy 925 precipitation-hardenable nickel-iron-chromium alloy with additions of molybdenum and copper. It combines the high strength of a precipitation-hardenable alloy with the excellent corrosion resistance of INCOLOY alloy 825. The alloy has outstanding resistance to general corrosion, pitting, crevice corrosion, and stress-corrosion cracking in many aqueous environments including those containing sulphides and chlorides. Used for surface and down-hole hardware in sour gas wells and for oil-production equipment.


925 Incoloy Pipes Equivalent Grade:

STANDARD

UNS

WNR.

Alloy 925

N09925

-


Incoloy 925 Pipe Chemical Composition:

Grade

Ni%

Cr%

Fe%

Mo%

Cu%

Ti%

Al%

Mn%

Si%

Nb%

C%

S%

Incoloy 925

42.0-46.0

19.5-22.5

Min 22

2.5-3.5

1.5-3.0

1.9-2.4

0.1-0.5

Max 1.0

Max 0.5

Max 0.5

Max 0.03

Max 0.03


Incoloy 925 pipe Mechanical Properties:

Density

Melting Point

Tensile Strength

Yield Strength (0.2%Offset)

Elongation

8.08 g/cm3

1311°C-1366 °C

685 MPa

271 MPa

56%




Additional Information:

  • Packaging Details: Incoloy 925 Pipe are surface wash and clean to remove all impurities and stock in the warehouse. Then it is wrapped in thin plastic and also it ends are protected by plastic caps to avoid any damage in transit. Incoloy 925 Pipe is bundled in bubble wrap followed by assorting them in colored plastic bundles. An outer rope is tied to protect the tubing and they are packed in wooden box or container. M P Jain Provide Incoloy 925 Pipe with all necessary documents such as commercial invoice, packing list, Test Reports, HS Code, Country of Origin attested by the chamber of commerce, Fumigation Certificate, Warranty Letter, and Base Material Certificates. Every lot is supplied with a material test certificate as per EN 10204 NACE 3.1 standards indicating the chemical and mechanical properties of the Instrumentation Tubes. We also confirm the guarantee of the Incoloy 925 Pipe supplied as per Purchase order specifications and attest the same in the Material Test Certificate. We also welcome any third party inspection from an agency nominated by the customer to comply with NACE 3.2 Certification if required by the customer at an extra cost.
Get Best Quote Request Callback
Inconel 825 Pipe

Inconel 825 Pipe

Product Price: Rs 350 / KGSGet Best Price

Product Details:
Material GradeInconel 825
Size/Diameter15"NB
Usage/ApplicationAtomic Energy
BrandMPJ
Elongation30%
Tensile Strength80000 Psi
Yield Strength32000 Psi
MaterialInconel

M P Jain Tubing Solution is a prestigious organization that is relatively engaged in offering a wide range of Inconel 800 Pipes. We are considered a noted manufacturer and supplier of a massive compilation of Incoloy 825 Pipes. INCOLOY alloy 825 (UNS N08825/W.Nr. 2.4858) is a nickel-iron-chromium alloy with additions of molybdenum, copper, and titanium. The alloy’s chemical composition is designed to provide exceptional resistance to many corrosive environments. The nickel content is sufficient for resistance to chloride-ion stress-corrosion cracking. The nickel, in conjunction with the molybdenum and copper, also gives outstanding resistance to reducing environments such as those containing sulfuric and phosphoric acids. The molybdenum also aids resistance to pitting and crevice corrosion. The alloy’s chromium content confers resistance to a variety of oxidizing substances such as nitric acid, nitrates and oxidizing salt. The titanium addition serves, with an appropriate heat treatment, to stabilize the alloy against sensitization to intergranular corrosion.

825 Incoloy Alloy Pipes Chemical Composition:

Grade

C

Mn

Si

Fe

S

Cr

Cu

Ti

825

min.

22.0

19.5

1.5

0.6

max.

0.05

1.0

0.5

0.015

23.5

3.0

1.2

Incoloy Alloy 825 Pipe Mechanical Properties:

Grade

Tensile Strength (MPa) min

Yield Strength 0.2% Proof (MPa) min

Elongation (% in 50mm) min

Hardness

Rockwell B (HR B) max

Brinell (HB) max

825

Psi – 80,000 , MPa – 550

Psi – 32,000 , MPa –220

30

Equivalent Grades for 825 Incoloy Pipe:

Grade

UNS No

Old British

Euronorm

GOST

Japanese JIS

BS

En

No

AFNOR

Incoloy 825

N08825

NA 16

NiCr21Mo

2.4858

NFE30C20DUM

????703

NCF 825



Additional Information:

  • Packaging Details: Incoloy 825 Pipe are surface wash and clean to remove all impurities and stock in the warehouse. Then it is wrapped in thin plastic and also it ends are protected by plastic caps to avoid any damage in transit. Incoloy 825 Pipe is bundled in bubble wrap followed by assorting them in colored plastic bundles. An outer rope is tied to protect the tubing and they are packed in wooden box or container. M P Jain Provide Incoloy 825 Pipe with all necessary documents such as commercial invoice, packing list, Test Reports, HS Code, Country of Origin attested by the chamber of commerce, Fumigation Certificate, Warranty Letter, and Base Material Certificates. Every lot is supplied with a material test certificate as per EN 10204 NACE 3.1 standards indicating the chemical and mechanical properties of the Instrumentation Tubes. We also confirm the guarantee of the Incoloy 825 Pipe supplied as per Purchase order specifications and attest the same in the Material Test Certificate. We also welcome any third party inspection from an agency nominated by the customer to comply with NACE 3.2 Certification if required by the customer at an extra cost.
Get Best Quote Request Callback
Inconel 625 Pipe

Inconel 625 Pipe

Product Price: Rs 300 / KGSGet Best Price

Product Details:
Material GradeInconel 625
Size/Diameter15"NB
Usage/ApplicationDesalination Plants
BrandMPJ
Elongation42.5%
Tensile Strength135000 Psi
Yield Strength75000 Psi
MaterialInconel

M P Jain Tubing Solutions is one of the well-known manufacturer, supplier & exporter of Inconel 625 Tube. Inconel 625 Pipe is an industrial products which has the pressure ratings as according to the temperature provided to it temperature can be hot as well and cold too for example if we provide temperature from -29 degrees to 38 degrees centigrade then it gives the pressure rating of almost 51.7 and it further depends on the temperature which is provided. Inconel 625 Pipe are used across an extensive range of industries including plants, chemical plants and power group facilities. Inconel 625 Pipe has been widely used for over 50 years in the maritime and fuel industries for applications demanding high strength, break durability, material ability and resistance to corrosion. There are some dimensions of this products which are discussed such as ASTM, ASME and API etc. furthermore Alloy 625 Seamless Pipe  (UNS N06625) fights a wide range of harshly corrosive surroundings and is particularly resistant to fighting and gap corrosion.

Equivalent Grades of Inconel 625 Pipes:

STANDARD

WERKSTOFF NR.

UNS

JIS

AFNOR

BS

GOST

EN

OR

Inconel 625

2.4856

N06625

NCF 625

NC22DNB4M

NA 21

????75????????

NiCr22Mo9Nb

????602


Chemical Composition Of Inconel 625 Pipe:

Ni

Fe

C

Mn

Si

Cr2

Mo

Co

Al

Ti

Nb + Ta

P

S

58.0 min

5.0 max

0.10 max

0.50 max

0.50 max

20.0-23.0

8.0-10.0

1.0 max

0.40 max

0.40 max

3.15–4.15

0.015 max

0.015 max


Mechanical Properties of Inconel 625 Pipes:

Density

8.4  g/cm3

Melting Point

1350 °C (2460 °F)

Tensile Strength

Psi – 1,35,000 , MPa – 930

Yield Strength (0.2%Offset)

Psi – 75,000 , MPa – 517

Elongation

42.5 %



Additional Information:

  • Packaging Details: Inconel 625 pipes are surface wash and clean to remove all impurities and stock in the warehouse. Then it is wrapped in thin plastic and also it ends are protected by plastic caps to avoid any damage in transit. Inconel 625 pipes is bundled in bubble wrap followed by assorting them in colored plastic bundles. An outer rope is tied to protect the tubing and they are packed in wooden box or container. M P Jain Provide Inconel 625 pipes with all necessary documents such as commercial invoice, packing list, Test Reports, HS Code, Country of Origin attested by the chamber of commerce, Fumigation Certificate, Warranty Letter, and Base Material Certificates. Every lot is supplied with a material test certificate as per EN 10204 NACE 3.1 standards indicating the chemical and mechanical properties of the Instrumentation Tubes. We also confirm the guarantee of the Inconel 625 pipes supplied as per Purchase order specifications and attest the same in the Material Test Certificate. We also welcome any third party inspection from an agency nominated by the customer to comply with NACE 3.2 Certification if required by the customer at an extra cost.
Get Best Quote Request Callback
Inconel 601 Pipe

Inconel 601 Pipe

Product Price: Rs 300 / KGSGet Best Price

Product Details:
Material GradeInconel 601
Size/Diameter150"NB
Usage/ApplicationDesalination Plants
BrandMPJ
Elongation40%
QualityHigh Quality
MaterialInconel

M P Jain Tubing Solutions is the leading manufacturer, supplier, & exporter of inconel 601 pipe. Inconel 601 is a nickel-chromium alloy used for applications that require resistance to corrosion and heat. This nickel alloy stands out due to its resistance to high temperature oxidation, remaining highly resistant to oxidation through 2200° F. Alloy 601 develops a tightly adherent oxide scale which resists spalling even under conditions of severe thermal cycling. This nickel alloy has good high temperature strength, and retains its ductility after long service exposure. It has good resistance to aqueous corrosion, high mechanical strength, and is readily formed, machined and welded. Inconel 601’s properties make it a material of broad utility in fields like thermal processing, chemical processing, pollution control, aerospace, and power generation. However, alloy 601 is not suggested for use in strongly reducing, sulfur bearing environments.


601 Inconel Alloy Pipes Chemical Composition:

Grade

C

Mn

Si

Fe

S

Cr

Cu

Ni

601

min.

Bal

21.0

58.0

max.

0.10

1.0

0.5

Bal

0.015

25.0

1.0

63.0


Inconel Alloy 601 Pipe Mechanical Properties:

Grade

Tensile Strength (MPa) min

Yield Strength 0.2% Proof (MPa) min

Elongation (% in 50mm) min

Hardness

Rockwell B (HR B) max

Brinell (HB) max

601

Psi – 95,000 , MPa -655

Psi – 45,000 , MPa – 310

40


Equivalent Grades for 601 Inconel Pipe:

Grade

UNS No

Old British

Euronorm

GOST

Japanese JIS

BS

En

No

AFNOR

Inconel 601

N06601

NA 49

NiCr23Fe

2.4851

NC23FeA

XH60BT

NCF 601



Additional Information:

  • Packaging Details: Inconel 601 pipes are surface wash and clean to remove all impurities and stock in the warehouse. Then it is wrapped in thin plastic and also it ends are protected by plastic caps to avoid any damage in transit. Inconel 601 pipes is bundled in bubble wrap followed by assorting them in colored plastic bundles. An outer rope is tied to protect the tubing and they are packed in wooden box or container. M P Jain Provide Inconel 601 pipes with all necessary documents such as commercial invoice, packing list, Test Reports, HS Code, Country of Origin attested by the chamber of commerce, Fumigation Certificate, Warranty Letter, and Base Material Certificates. Every lot is supplied with a material test certificate as per EN 10204 NACE 3.1 standards indicating the chemical and mechanical properties of the Instrumentation Tubes. We also confirm the guarantee of the Inconel 601 pipes supplied as per Purchase order specifications and attest the same in the Material Test Certificate. We also welcome any third party inspection from an agency nominated by the customer to comply with NACE 3.2 Certification if required by the customer at an extra cost.
Get Best Quote Request Callback
Incoloy 330 Tubes

Incoloy 330 Tubes

Product Price: Rs 310 / KgGet Best Price

Product Details:
Material GradeIncoloy 330
MaterialIncoloy Alloy
Usage/ApplicationDesalination Plants
BrandMPJ
StandardASTM
Size150"NB
EndPlain End

M P Jain Tubing Solution is offering an extensive array of Incoloy 330 Tubes. Incoloy 330 is a steel alloy that is high in nickel and chromium. It provides good resistance to carburization, oxidation, and nitridation. RA 330 is also easily welded using all conventional processes; it can be formed hot (between 1750-1200° F) and cold. SS 330 Round Tubes is a nickel – iron – chromium alloy with an addition of silicon for enhanced oxidation resistance, which are further composed of nickel – chromium – iron as the principal elements. Incoloy 330 Seamless Tubes is suited to applications that will take advantage of its resistance to carburization, thermal shock and oxidation. Incoloy 330 stainless steel alloy that is commonly used in chemical, petrochemical, ore, power generation and thermal processing applications, some of which include: Industrial heating furnaces, Petrochemical furnace parts, Perlite systems and equipment, Boiler fixtures, Gas turbine components, Heat-treat furnace containers, High temperature fans, Salt pots.


Equivalent Grades for 330/ SS330/ Ra330 Incoloy Tubes:

STANDARD

WERKSTOFF NR.

UNS

Incoloy 330

 1.4886

N08330


330/SS330/Ra330 Incoloy Alloy Tube Chemical Composition:

Grade

C

Mn

Si

N

Cr

330/SS330/Ra330

0.08 max

2 max

0.75-1.50 max

34.00 – 37.00

17.00 – 20.00



Additional Information:

  • Packaging Details: Inconel 330 tubes are surface wash and clean to remove all impurities and stock in the warehouse. Then it is wrapped in thin plastic and also it ends are protected by plastic caps to avoid any damage in transit. Inconel 330 tubes is bundled in bubble wrap followed by assorting them in colored plastic bundles. An outer rope is tied to protect the tubing and they are packed in wooden box or container. M P Jain Provide Inconel 330 tubes with all necessary documents such as commercial invoice, packing list, Test Reports, HS Code, Country of Origin attested by the chamber of commerce, Fumigation Certificate, Warranty Letter, and Base Material Certificates. Every lot is supplied with a material test certificate as per EN 10204 NACE 3.1 standards indicating the chemical and mechanical properties of the Instrumentation Tubes. We also confirm the guarantee of the Inconel 330 tubes supplied as per Purchase order specifications and attest the same in the Material Test Certificate. We also welcome any third party inspection from an agency nominated by the customer to comply with NACE 3.2 Certification if required by the customer at an extra cost.
Get Best Quote Request Callback
Inconel 600 Pipes

Inconel 600 Pipes

Product Price: Rs 300 / KGSGet Best Price

Product Details:
Material GradeInconel 600
Size/Diameter1/8"NB
BrandMPJ
StandardASTM
Elongation40%
Tensile Strength95000 Psi
MaterialInconel
Usage/ApplicationChemical Handling

M P Jain Tubing Solutions is a leading manufacturer and supplier of Inconel 600 pipes in India and worldwide. With 72% minimum nickel, Inconel 600 pipes are highly resistant -to many organic and inorganic compounds and provides good resistance in reducing conditions. UNS N06600 or W.Nr. 2.4816, Inconel 600, also known as Alloy 600, is a nickel-chromium-iron alloy with good oxidation resistance at high temperatures and resistance to chloride ion stress-corrosion cracking, corrosion by high-purity water, and caustic corrosion. It is mainly used for furnace components, in pulp & paper manufacturing, chemical and food processing, in nuclear engineering, and for sparking electrodes. These WNR 2.4816 Pipes and Inconel 600 pipe is a nickel-based superalloy that holds resistance to higher temperatures and elevated strength properties. Inconel Alloy 600 Pipes products is a nickel-molybdenum-chromium superalloy with an addition of tungsten designed to have excellent corrosion resistance in a wide range of severe environments.

Size:

  • 1/8"NB to 30"NB IN


600 Inconel Alloy Pipes Chemical Composition:

Grade

C

Mn

Si

Fe

S

Cr

Cu

Ni

600

min.

6.0

14.0

72.0

max.

0.15

1.0

0.5

10.0

0.015

17.0

0.5


Inconel Alloy 600 Pipe Mechanical Properties:

Grade

Tensile Strength (MPa) min

Yield Strength 0.2% Proof (MPa) min

Elongation (% in 50mm) min

Hardness

Rockwell B (HR B) max

Brinell (HB) max

600

Psi – 95,000 , MPa -655

Psi – 45,000 , MPa – 310

40


Equivalent Grades for 600 Inconel Pipe:

Grade

UNS No

Old British

Euronorm

GOST

Japanese JIS

BS

En

No

AFNOR

Inconel 600

N06600

NA 13

NiCr15Fe

2.4816

NC15FE11M

?????????? 28-2,5-1,5

NCF 600



Additional Information:

  • Packaging Details: Inconel 600 Pipe are surface wash and clean to remove all impurities and stock in the warehouse. Then it is wrapped in thin plastic and also it ends are protected by plastic caps to avoid any damage in transit. Inconel 600 Pipe is bundled in bubble wrap followed by assorting them in colored plastic bundles. An outer rope is tied to protect the tubing and they are packed in wooden box or container. M P Jain Provide Inconel 600 Pipe with all necessary documents such as commercial invoice, packing list, Test Reports, HS Code, Country of Origin attested by the chamber of commerce, Fumigation Certificate, Warranty Letter, and Base Material Certificates. Every lot is supplied with a material test certificate as per EN 10204 NACE 3.1 standards indicating the chemical and mechanical properties of the Instrumentation Tubes. We also confirm the guarantee of the Inconel 600 Pipe supplied as per Purchase order specifications and attest the same in the Material Test Certificate. We also welcome any third party inspection from an agency nominated by the customer to comply with NACE 3.2 Certification if required by the customer at an extra cost.
Get Best Quote Request Callback

EXPLORE MORE CATEGORIES

Looking For "Inconel Pipes And Tubes"?
Thank you Your Enquiry has been sent successfully.
© M P Jain Tubing Solutions LLP. All Rights Reserved (Terms of Use)Developed and managed by IndiaMART InterMESH Ltd.